Chevy Rear-End Needed
#1
Thig Digged
Thread Starter
Join Date: Nov 2002
Location: Poquoson
Posts: 2,645
Likes: 0
Received 0 Likes
on
0 Posts
Chevy Rear-End Needed
Posting for a friend.
He blew out the rear end in his 95 1500 4x4. The axle number is GU6. Not sure about the gear ratio or anything, but if you have anything, please PM me.
He blew out the rear end in his 95 1500 4x4. The axle number is GU6. Not sure about the gear ratio or anything, but if you have anything, please PM me.
#4
The Pro to call.
Join Date: Jul 2003
Location: under cars.
Posts: 6,172
Likes: 0
Received 0 Likes
on
0 Posts
Re: Chevy Rear-End Needed
unless it thrashed the case, its cheaper to rebuild one. more then likely, it has a bad pinion bearing, and some spider gears broken too.....(most common failure on them that i have seen)
400 in parts, 200ish labor and its new again.
400 in parts, 200ish labor and its new again.
#7
Re: Chevy Rear-End Needed
This is one of my buddies. he as a 14 bolt for sale but if you go to 14 bolt in then you will ahve 8 lug so you might consider doing 8 lug in the front or something.
http://p1.forumforfree.com/next-vt10...r=asc&start=15
http://p1.forumforfree.com/next-vt10...r=asc&start=15