1964 Triumph Bonneville Project
03-15-2011, 10:26 AM
#1
Registered member
Thread Starter
Join Date: Jan 2009
Location: VaBeach
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
1964 Triumph Bonneville Project
Bill
Virginia Beach
PM or Post
Price Varies on what you want....up to 1500 or partial trade
I bought this several months ago with the hopes of having it on the road by summer. It has been one thing after another, after another, etc since then. Sourcing parts from Europe and the waiting/expense is getting old. Im going to pass this along and buy another bike that I can get on the road quicker.
Details
1964 Frame and title with correct tank
650 Bonneville engine circa 1970 with correct carbs
Missing
Most electrical, some hardware, pushrods and rockers, front fender, petcocks, seat, exhaust, odds and ends
What Ive done
Welded and refinished frame....painted with epoxy paint
New rear shocks
new neck bearings
new fork tubes and fork parts
clip on handlebars, headlight ears, headlight
Whats not shown in the pics
cool oil tank I found online from France
rear fender
engine
What I'll complete before sale
finish up the fork rebuild.....waiting on parts from England
mount engine in frame. Im not mounting engine until forks are wrapped up
This is a cool bike that you can still take in several different directions. Stock resto? bobber? cafe?
When I have the forks done and the engine installed, Id like to get close to $1500 for it. I'll also negotiate if there are parts that you don't want or need. The first pic is when I picked it up. The 2nd is how it looks currently. These are bringing big bucks when finished. I'll also consider a partial trade for another bike....something old preferred. Thanks for looking
Virginia Beach
PM or Post
Price Varies on what you want....up to 1500 or partial trade
I bought this several months ago with the hopes of having it on the road by summer. It has been one thing after another, after another, etc since then. Sourcing parts from Europe and the waiting/expense is getting old. Im going to pass this along and buy another bike that I can get on the road quicker.
Details
1964 Frame and title with correct tank
650 Bonneville engine circa 1970 with correct carbs
Missing
Most electrical, some hardware, pushrods and rockers, front fender, petcocks, seat, exhaust, odds and ends
What Ive done
Welded and refinished frame....painted with epoxy paint
New rear shocks
new neck bearings
new fork tubes and fork parts
clip on handlebars, headlight ears, headlight
Whats not shown in the pics
cool oil tank I found online from France
rear fender
engine
What I'll complete before sale
finish up the fork rebuild.....waiting on parts from England
mount engine in frame. Im not mounting engine until forks are wrapped up
This is a cool bike that you can still take in several different directions. Stock resto? bobber? cafe?
When I have the forks done and the engine installed, Id like to get close to $1500 for it. I'll also negotiate if there are parts that you don't want or need. The first pic is when I picked it up. The 2nd is how it looks currently. These are bringing big bucks when finished. I'll also consider a partial trade for another bike....something old preferred. Thanks for looking
03-15-2011, 01:53 PM
#3
Registered member
Thread Starter
Join Date: Jan 2009
Location: VaBeach
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1964 Triumph Bonneville Project
Pre OIF. Below is an OIF frame. My rear section bolts on so it is very easy to convert to a hardtail. The OIF frame rear section is welded on.
Thread
Thread Starter
Forum
Replies
Last Post
cbr6004sale
Motorcycles & Parts
15
03-21-2012 09:00 PM
RCR Roscoe
Automotive Gallery
20
04-22-2009 11:45 AM