Profile Clarus CL440 (4 channel) Amp
06-02-2012, 03:04 PM
#1
Registered member
Thread Starter
Join Date: Nov 2007
Location: Chesapeake,VA
Posts: 269
Likes: 0
Received 0 Likes
on
0 Posts
Profile Clarus CL440 (4 channel) Amp
Name: citymunky
Location: Chesapeake
Means of contact: PM
Price: $ 60
FEATURES AND BENEFITS:
DC Offset Protection circuit protects the output of the amplifier against DC voltage. If for some reason DC voltage is detected at the output stage, the amplifier will shut down protecting the speakers from direct current.
Short Circuit Protection circuit protects the amplifier from damage due to a short found in the speakers or wiring. If one of the speakers or its wiring comes in contact with ground, the amplifier will shut down. To resume normal operation, correct the problem and turn the head unit off, then back on. The amplifier will reset and play again.
To protect the amplifier circuitry against damage caused by prolonged exposure to high temperatures, a thermal protection circuit is activated if the amplifier reaches excessively high operating temperature. Once the thermal circuit is activated, the amplifier will shut down to cool off. The Amplifier will automatically turn back on once it cools down to a safe operating temperature. Protection Indicator red diagnostic L.E.D. indicates that the amplifier has gone into protection. Once on, the amplifier will have no output. To resume normal operation, turn head unit off and back on again. If the amplifier immediately goes back into protection, check for high temperature, short circuits or low impedance. If so desired the amplifier may be run in stereo and mono at the same time. For example, this feature would allow you to run a pair of mid and tweeters in stereo and a sub-woofer mono.
The Clarus amplifiers include a built-in variable high and low pass crossovers. The crossover features a variable frequency selection (40Hz , 500Hz) for precise high or low pass filtering. For added low frequency performance the amplifiers are equipped with a variable 0,18 dB bass boost @ 45Hz. One set of full range line outputs have been provided for convenient connection to additional amplifiers in the system. Power Fusing protects the amplifier against short circuits and excessive current. Remote Turn-on automatically turns amplifier on when connected to the head unit's remote output. The amplifier will turn on and off with the head unit to save current consumption. This control also operates the reset circuit for the amplifier's protection. It must be connected with the head unit in order to reset protection circuits.
Heavy gauge bare wire distribution blocks are provided for maximum power and signal transfer with minimal resistance. Adjustable Input Sensitivity allows you to fine-tune the level matching between your source and the power amplifier. High Level Input allows for integration with "Factory Sound Systems".
Details:
2-, 3-, or 4-channel output
Tri-way capable (Tri-Way crossover required)
75 watts x 4 at 2 ohms
150 watts x 2 in bridged mode
requires 8-gauge power and ground leads -- wiring and hardware not included with amplifier
MOSFET power supplies
front and rear channel low- and high-pass crossovers (continuously variable 40-500 Hz, 12 dB/octave)
anti-thump circuit for quiet turn on/off
accepts up to 6-gauge power, ground, and speaker wire
0-18 dB variable bass boost at 45 Hz
gold-plated preamp inputs and block terminals
speaker-level inputs
preamp outputs
power light strip
dimensions: 12-5/8"W x 2-5/8"H x 10-3/16"D
Location: Chesapeake
Means of contact: PM
Price: $ 60
FEATURES AND BENEFITS:
DC Offset Protection circuit protects the output of the amplifier against DC voltage. If for some reason DC voltage is detected at the output stage, the amplifier will shut down protecting the speakers from direct current.
Short Circuit Protection circuit protects the amplifier from damage due to a short found in the speakers or wiring. If one of the speakers or its wiring comes in contact with ground, the amplifier will shut down. To resume normal operation, correct the problem and turn the head unit off, then back on. The amplifier will reset and play again.
To protect the amplifier circuitry against damage caused by prolonged exposure to high temperatures, a thermal protection circuit is activated if the amplifier reaches excessively high operating temperature. Once the thermal circuit is activated, the amplifier will shut down to cool off. The Amplifier will automatically turn back on once it cools down to a safe operating temperature. Protection Indicator red diagnostic L.E.D. indicates that the amplifier has gone into protection. Once on, the amplifier will have no output. To resume normal operation, turn head unit off and back on again. If the amplifier immediately goes back into protection, check for high temperature, short circuits or low impedance. If so desired the amplifier may be run in stereo and mono at the same time. For example, this feature would allow you to run a pair of mid and tweeters in stereo and a sub-woofer mono.
The Clarus amplifiers include a built-in variable high and low pass crossovers. The crossover features a variable frequency selection (40Hz , 500Hz) for precise high or low pass filtering. For added low frequency performance the amplifiers are equipped with a variable 0,18 dB bass boost @ 45Hz. One set of full range line outputs have been provided for convenient connection to additional amplifiers in the system. Power Fusing protects the amplifier against short circuits and excessive current. Remote Turn-on automatically turns amplifier on when connected to the head unit's remote output. The amplifier will turn on and off with the head unit to save current consumption. This control also operates the reset circuit for the amplifier's protection. It must be connected with the head unit in order to reset protection circuits.
Heavy gauge bare wire distribution blocks are provided for maximum power and signal transfer with minimal resistance. Adjustable Input Sensitivity allows you to fine-tune the level matching between your source and the power amplifier. High Level Input allows for integration with "Factory Sound Systems".
Details:
2-, 3-, or 4-channel output
Tri-way capable (Tri-Way crossover required)
75 watts x 4 at 2 ohms
150 watts x 2 in bridged mode
requires 8-gauge power and ground leads -- wiring and hardware not included with amplifier
MOSFET power supplies
front and rear channel low- and high-pass crossovers (continuously variable 40-500 Hz, 12 dB/octave)
anti-thump circuit for quiet turn on/off
accepts up to 6-gauge power, ground, and speaker wire
0-18 dB variable bass boost at 45 Hz
gold-plated preamp inputs and block terminals
speaker-level inputs
preamp outputs
power light strip
dimensions: 12-5/8"W x 2-5/8"H x 10-3/16"D
Last edited by citymunky; 07-05-2012 at 12:41 PM.
