JL e4300 amp
05-05-2009, 05:21 PM
#1
Registered Member
Thread Starter
Join Date: May 2003
Location: VA Beach
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts
JL e4300 amp
JL e4300 for sale, no trades. Great amp in great condition.
Located in Kempsville area
$175 obo
-Class AB 4-Channel Amplifier
-Absolute Symmetry Class AB Circuit
-Differential, Noise Cancelling Input Topology: RCA jack inputs(low-level) and multi-pin jack(high-level)
-On-board crossover: State-variable, 12dB/octave Butterworth with continuously variable cutoff frequency selection from 50-200 Hz. Configurable as Low-Pass or High-Pass
-Preamp Output: Pass-through type
-CEA-2006 Compliant
-RMS Power Rating (14.4V):
* 4 ohms: 70 watts x 4 chan.
* 2 ohms: 110 watts x 4 chan.
* Bridged (4 ohms): 220 watts x 2 chan.
* Bridged (8 ohms): 140 watts x 2 chan.
-RMS Power Rating (12.5V):
* 4 ohms: 45 watts x 4 chan.
* 2 ohms: 75 watts x 4 chan.
* Bridged (4 ohms): 150 watts x 2 chan.
* Bridged (8 ohms): 90 watts x 2 chan.
-Frequency Response: 10 - 25kHz
-Damping Factor: >200 @ 4 Ohms / 50Hz, >100 at 2 Ohms/50Hz
-S/N Ratio: >104 dB referred to rated power(A-weighted, 20Hz-20kHz noise bandwidth)
-Input Range: 200mV - 8V RMS
-Bass EQ: +6dB Fixed Frequency, Fixed 'Q' with port for optional remote bass control
-Slew Rate: +- 22V/us
-Dimensions: 13.8" L x 9.25" W x 2.36" H
Located in Kempsville area
$175 obo
-Class AB 4-Channel Amplifier
-Absolute Symmetry Class AB Circuit
-Differential, Noise Cancelling Input Topology: RCA jack inputs(low-level) and multi-pin jack(high-level)
-On-board crossover: State-variable, 12dB/octave Butterworth with continuously variable cutoff frequency selection from 50-200 Hz. Configurable as Low-Pass or High-Pass
-Preamp Output: Pass-through type
-CEA-2006 Compliant
-RMS Power Rating (14.4V):
* 4 ohms: 70 watts x 4 chan.
* 2 ohms: 110 watts x 4 chan.
* Bridged (4 ohms): 220 watts x 2 chan.
* Bridged (8 ohms): 140 watts x 2 chan.
-RMS Power Rating (12.5V):
* 4 ohms: 45 watts x 4 chan.
* 2 ohms: 75 watts x 4 chan.
* Bridged (4 ohms): 150 watts x 2 chan.
* Bridged (8 ohms): 90 watts x 2 chan.
-Frequency Response: 10 - 25kHz
-Damping Factor: >200 @ 4 Ohms / 50Hz, >100 at 2 Ohms/50Hz
-S/N Ratio: >104 dB referred to rated power(A-weighted, 20Hz-20kHz noise bandwidth)
-Input Range: 200mV - 8V RMS
-Bass EQ: +6dB Fixed Frequency, Fixed 'Q' with port for optional remote bass control
-Slew Rate: +- 22V/us
-Dimensions: 13.8" L x 9.25" W x 2.36" H
