850 watt 4 channel amp (powerful)
12-15-2009, 11:23 AM
#1
Registered Member
Thread Starter
Join Date: Sep 2008
Location: Chesapeake
Posts: 671
Likes: 0
Received 0 Likes
on
0 Posts
850 watt 4 channel amp (powerful)
Name-John
Location-757
COntact-PM/Thread
Trades- a smaller 4 channel and/or mono amp, GSR leather seats, other offers will also be considered, just be reasonable.
Description-
I have a kicker 08zx850.4 that im trading. The amp is in perfect condition and is very powerfull. right now i have it running 6x9 kappas and 6 1/2 kappa components and it can get very loud.
Here are the specs. (not listed below- at 4ohms 175x4)
Model ZX850.4
Power (watts/channel) 2 Ohm Stereo 215 x 4
Power (watts/channel) 4 Ohm Bridged Mono 425 x 2
Remote Bass Control Yes
Length (in.,cm) 23-1/4, 59
Height (in.,cm) 2-1/8, 5.4
Depth (in.,cm) 9-5/8, 24.4
Frequency Response 20Hz-20kHz, +0,-1dB
Input Sensitivity (High Level) 250mV-10V
Input Sensitivity (Low Level) 125mV-5V
Signal-to-Noise Ratio >95dB, a-weighted, re: rated power
Active Crossover 12dB/octave, variable 50Hz-200Hz; selectable high, low or all pass
KICKEQ Boost Variable to +18dB, centered @ 40Hz
Differential RCA inputs eliminates unwanted system noise
Automatic Turn-On Modes +12V (Remote) - preferred method; uses the remote turn-on lead from source unit; DC Offset - detects surge from hi-level speaker outputs after source unit is turned on; Audio (Signal Sense) - detects audio signal from source unit
NOT ACTUAL AMP/ CAN TEXT PICS IF NEEDED OF ACTUAL AMP
THANKS FOR LOOKING, PLEASE KEEP NEGATIVE COMMENTS TO YOURSELF
Location-757
COntact-PM/Thread
Trades- a smaller 4 channel and/or mono amp, GSR leather seats, other offers will also be considered, just be reasonable.
Description-
I have a kicker 08zx850.4 that im trading. The amp is in perfect condition and is very powerfull. right now i have it running 6x9 kappas and 6 1/2 kappa components and it can get very loud.
Here are the specs. (not listed below- at 4ohms 175x4)
Model ZX850.4
Power (watts/channel) 2 Ohm Stereo 215 x 4
Power (watts/channel) 4 Ohm Bridged Mono 425 x 2
Remote Bass Control Yes
Length (in.,cm) 23-1/4, 59
Height (in.,cm) 2-1/8, 5.4
Depth (in.,cm) 9-5/8, 24.4
Frequency Response 20Hz-20kHz, +0,-1dB
Input Sensitivity (High Level) 250mV-10V
Input Sensitivity (Low Level) 125mV-5V
Signal-to-Noise Ratio >95dB, a-weighted, re: rated power
Active Crossover 12dB/octave, variable 50Hz-200Hz; selectable high, low or all pass
KICKEQ Boost Variable to +18dB, centered @ 40Hz
Differential RCA inputs eliminates unwanted system noise
Automatic Turn-On Modes +12V (Remote) - preferred method; uses the remote turn-on lead from source unit; DC Offset - detects surge from hi-level speaker outputs after source unit is turned on; Audio (Signal Sense) - detects audio signal from source unit
NOT ACTUAL AMP/ CAN TEXT PICS IF NEEDED OF ACTUAL AMP
THANKS FOR LOOKING, PLEASE KEEP NEGATIVE COMMENTS TO YOURSELF
Last edited by HP2MPG; 12-25-2009 at 05:54 PM.
Thread
Thread Starter
Forum
Replies
Last Post
zonedoutboy6130
Parts ARCHIVE
12
06-23-2008 08:30 PM
1sol2nv
Other ARCHIVE
1
11-09-2007 04:34 AM
