Turbo Miata
10-07-2010, 10:45 AM
#1
Registered Member
Thread Starter
Join Date: Mar 2010
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Turbo Miata
SOLD
UPDATE: Car runs safely on 20psi and is ballsss fast, still needs a tune since the AFRs are around 10, but perfectly driveable. Burns a little oil at startup due to high oil pressures, but does not burn oil once warmed up! COME FOR A RIDE IN THIS THING AND FALL IN LOVE! I think my price is more than fair for a car with quality parts and a fully built motor. Let's make a sale happen!
http://www.youtube.com/watch?v=TaOjXTeTxuw
I have a 1993 Mazda Miata for sale, in USA - Virginia.
Mileage: 130000 miles on chassis, 20000 on motor, 5000 on fresh head
Name: Alex
Location: Downtown Richmond, VA
Best way to be reached: alexanderaudi@gmail.com (cell # by request)
Title: In hand
Reason for selling: I can't fit, plain and simple. I'm 6'5" and short of doing a custom roll bar setup, even despite my efforts, I can't fit safely in this car
Here is the scoop on this car, hopefully this prevents any misunderstandings about the car's history. Originally built by Terry @ Fortune Auto. Then the car went to the next owner in NOVA, while he owned it, it got the 6 speed swap along with many new goodies such as a fresh head. The car sat at a shop up in NOVA for a while, the shop went under, and then the car traveled around to small shops to get it back in running order. After several months, I was finally able to buy the car in February 2010. I replaced the differential that was going out with a new unit from a parts supplier in Georgia. Also I spent several days on the paint in this car, I fully polished the car using a 2 step process with my porter cable, then I fully waxed the car. Then the car threw me for a loop if you will on a very simple issue. It blew the main fuse while I was working on installing a headunit. So I spent weeks doing other little things on the car, and in hindsight it seems so silly that I didn't check the fuse and go right back to motoring. Well I took the car up to a race shop and they found the issue. While the car was there I also had them replace the fragile RX-7 ignition system with the Bosch setup that the ecu likes better and is much more reliable. The original purpose for the car being there was to install my harnesses and racing seats. After picking the car up, I found that I still was not satisfied with where I was sitting. I was below the bar for street use, but my head was in the danger zone for hitting the bar without a helmet, and with a helmet my head was over the bar. This made the car useless to me. Honestly, I am just trying to get back on the track, and this car just ain't ready for that duty for someone of my physique.
Spec Sheet:
1993 Mazda Miata, 130000 on chassis
Fully Built 1.6 (30psi capable/25psi daily)
20000 miles on motor
5000 miles on fresh head
Wesco Forged Pistons 9:1
Carillo Rods
ARP Head studs
Multi-Angle Valve Job
SS Intake and Exhaust valves
Titanuim valve spring retainers
Metal Head Gasket
Turbonetics t3/t4 60 trim StageIII .63 a/r
Haltech E6k Standalone
BRAND NEW Bosch ignition system
750cc Injectors
AEM FPR
RX7 Fuel pump
Turbonetics wastegate
Custom log turbo manifold
Isuzu NPR intercooler
Aluminum Intercooler piping
Apexi Dual chamber BOV
Silicone Hoses
Aluminum Intake with HKS style filter
Anodized Catch can
TRANSMISSION:
BRAND NEW Torsen LSD
6 speed transmission swap
Simpson Design short shifter kit
SUSPENSION/WHEELS:
Tein flex Coilovers
SM 002 Wheels 15x8 0 offset
195/50/15 Kuhmos
Stainless lines
Cross Drilled rotors
Ferrodo pads
INTERIOR:
AEM Wideband Gauge
Greddy EGT GAUGE
Autometer Boost gauge
Boss Frog SSCA legal roll bar
MOMO Classico wood steering wheel
NRG Quick release
Sola Polished Shift Knob and e-brake
AWD DIAWA Speedo gauges and Climate control
Custom mounted Push button Start and switches for Haltech
New Headrest Speakers
EXHAUST:
Custom 2.5 inch exhaust w/magnaflow muffler
Resonator and stock tip
BODY/AERO:
Mazda Rspec front lip
Rolled and Pulled fenders to accommodate wider wheels
Old School Cobra style gas lid by K.G Works
RS AZIAWA Airduct inlet
Other:
Viper Alarm system with motion sensor
Notes:
Car is currently on 20psi but needs a tune to be faster. The tune is from before the injectors were upgraded so it runs rich but safe. Since the car runs rich, it becomes overloaded with fuel before WOT.
This car is just silly fast, no lie it's scary fast!
Car can be driven home, but you will need insurance and transport tags
In Summary:
Good: Really damn fast, awesome to go topless on nice days, chicks dig convertibles, stanced, amazingly fun to drive, handles incredibly, name brand/quality parts, new diff and ignition system in the last 500 miles, paint shines, clean clean body
Bad: It's not in your driveway, convertible rear window is torn and needs replacement, no headunit currently in the car, tach does not work, needs a tune, turbo burn oil, and again the fact you aren't boosting around in this thing right now[/QUOTE]
UPDATE: Car runs safely on 20psi and is ballsss fast, still needs a tune since the AFRs are around 10, but perfectly driveable. Burns a little oil at startup due to high oil pressures, but does not burn oil once warmed up! COME FOR A RIDE IN THIS THING AND FALL IN LOVE! I think my price is more than fair for a car with quality parts and a fully built motor. Let's make a sale happen!
http://www.youtube.com/watch?v=TaOjXTeTxuw
I have a 1993 Mazda Miata for sale, in USA - Virginia.
Mileage: 130000 miles on chassis, 20000 on motor, 5000 on fresh head
Name: Alex
Location: Downtown Richmond, VA
Best way to be reached: alexanderaudi@gmail.com (cell # by request)
Title: In hand
Reason for selling: I can't fit, plain and simple. I'm 6'5" and short of doing a custom roll bar setup, even despite my efforts, I can't fit safely in this car
Here is the scoop on this car, hopefully this prevents any misunderstandings about the car's history. Originally built by Terry @ Fortune Auto. Then the car went to the next owner in NOVA, while he owned it, it got the 6 speed swap along with many new goodies such as a fresh head. The car sat at a shop up in NOVA for a while, the shop went under, and then the car traveled around to small shops to get it back in running order. After several months, I was finally able to buy the car in February 2010. I replaced the differential that was going out with a new unit from a parts supplier in Georgia. Also I spent several days on the paint in this car, I fully polished the car using a 2 step process with my porter cable, then I fully waxed the car. Then the car threw me for a loop if you will on a very simple issue. It blew the main fuse while I was working on installing a headunit. So I spent weeks doing other little things on the car, and in hindsight it seems so silly that I didn't check the fuse and go right back to motoring. Well I took the car up to a race shop and they found the issue. While the car was there I also had them replace the fragile RX-7 ignition system with the Bosch setup that the ecu likes better and is much more reliable. The original purpose for the car being there was to install my harnesses and racing seats. After picking the car up, I found that I still was not satisfied with where I was sitting. I was below the bar for street use, but my head was in the danger zone for hitting the bar without a helmet, and with a helmet my head was over the bar. This made the car useless to me. Honestly, I am just trying to get back on the track, and this car just ain't ready for that duty for someone of my physique.
Spec Sheet:
1993 Mazda Miata, 130000 on chassis
Fully Built 1.6 (30psi capable/25psi daily)
20000 miles on motor
5000 miles on fresh head
Wesco Forged Pistons 9:1
Carillo Rods
ARP Head studs
Multi-Angle Valve Job
SS Intake and Exhaust valves
Titanuim valve spring retainers
Metal Head Gasket
Turbonetics t3/t4 60 trim StageIII .63 a/r
Haltech E6k Standalone
BRAND NEW Bosch ignition system
750cc Injectors
AEM FPR
RX7 Fuel pump
Turbonetics wastegate
Custom log turbo manifold
Isuzu NPR intercooler
Aluminum Intercooler piping
Apexi Dual chamber BOV
Silicone Hoses
Aluminum Intake with HKS style filter
Anodized Catch can
TRANSMISSION:
BRAND NEW Torsen LSD
6 speed transmission swap
Simpson Design short shifter kit
SUSPENSION/WHEELS:
Tein flex Coilovers
SM 002 Wheels 15x8 0 offset
195/50/15 Kuhmos
Stainless lines
Cross Drilled rotors
Ferrodo pads
INTERIOR:
AEM Wideband Gauge
Greddy EGT GAUGE
Autometer Boost gauge
Boss Frog SSCA legal roll bar
MOMO Classico wood steering wheel
NRG Quick release
Sola Polished Shift Knob and e-brake
AWD DIAWA Speedo gauges and Climate control
Custom mounted Push button Start and switches for Haltech
New Headrest Speakers
EXHAUST:
Custom 2.5 inch exhaust w/magnaflow muffler
Resonator and stock tip
BODY/AERO:
Mazda Rspec front lip
Rolled and Pulled fenders to accommodate wider wheels
Old School Cobra style gas lid by K.G Works
RS AZIAWA Airduct inlet
Other:
Viper Alarm system with motion sensor
Notes:
Car is currently on 20psi but needs a tune to be faster. The tune is from before the injectors were upgraded so it runs rich but safe. Since the car runs rich, it becomes overloaded with fuel before WOT.
This car is just silly fast, no lie it's scary fast!
Car can be driven home, but you will need insurance and transport tags
In Summary:
Good: Really damn fast, awesome to go topless on nice days, chicks dig convertibles, stanced, amazingly fun to drive, handles incredibly, name brand/quality parts, new diff and ignition system in the last 500 miles, paint shines, clean clean body
Bad: It's not in your driveway, convertible rear window is torn and needs replacement, no headunit currently in the car, tach does not work, needs a tune, turbo burn oil, and again the fact you aren't boosting around in this thing right now[/QUOTE]
Last edited by Meaatah; 01-19-2011 at 01:05 PM.
10-07-2010, 10:51 AM
#2
RIP DRAGVA-2016
Join Date: Sep 2008
Location: super secret
Posts: 17,242
Likes: 0
Received 0 Likes
on
0 Posts
Re: Turbo Miata
minus the little nonsense like the seat and soft top this car looks bad ass..Gl man
Last edited by NasTHatch; 10-07-2010 at 11:47 AM.
10-07-2010, 11:11 AM
#3
Registered Member
Join Date: Mar 2009
Posts: 335
Likes: 0
Received 0 Likes
on
0 Posts
Re: Turbo Miata
Good guy by this its a steal alittle work and itll be nasty
10-07-2010, 11:41 AM
#4
Registered Member
Join Date: Oct 2010
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Re: Turbo Miata
looks nice man :thumbsup: just needs alittle TLC
10-09-2010, 07:55 AM
#5
Registered Member
Thread Starter
Join Date: Mar 2010
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Re: Turbo Miata
bump.
10-10-2010, 09:01 AM
#6
Registered Member
Thread Starter
Join Date: Mar 2010
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Re: Turbo Miata
bumppp
10-20-2010, 03:38 PM
#7
Registered Member
Thread Starter
Join Date: Mar 2010
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Re: Turbo Miata
bumpp
10-21-2010, 08:25 PM
#8
Registered Member
Thread Starter
Join Date: Mar 2010
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Re: Turbo Miata
bumpppp
10-22-2010, 10:07 AM
#9
Registered Member
Join Date: Oct 2008
Posts: 1,662
Likes: 0
Received 0 Likes
on
0 Posts
Re: Turbo Miata
damn awesome deal, makes me wish i never sold mine, glws
10-24-2010, 07:42 AM
#10
Registered Member
Thread Starter
Join Date: Mar 2010
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Re: Turbo Miata
To the top! You heard the man ^ c'mon I really can't go lower. For 6k your getting a car that has a clean body, built motor, 6speed, standalone, turbonetics turbo, tein flex coilovers, new rearend, and has a clean title. I've found the car I want, I just need the cash or a trade for something I can sell for cash. Help me out, and get an awesome car in return!