Nissan 240sx Drift Truck, SIKKY
 

Name:Dan Savage
Location: Manassas Va
Means of contact:savagemotorsports@gmail.com
Price: $20k

Description:
After 2 years of competing in StreetWise Drift and US Drift Pro Am series and earning a Formula Drift license each time Im ready to part ways with my awesome ride. To help fund a new car for my rookie year in 2014 Formula Drift I need to make room by selling this. This can be turn key ready to go and is more than capable of finishing on the podium if you can wheel it like how I did!


Clear clean title
90 240sx
89 s10 rear cab section completely Rhinolined
97 Kouki Fiberglass Conversion front end w multi vent hood
Fiberglass doors
Fiberglass 30mm overs
Mustang Gt rear spoiler

Erl Performance built/blueprinted LS3 6.3l (486 whp, 462 Trq Tuned at JE Import Performance)
Weisco Pistons
Compstar H-beam rods
Trick Flow 550 CNC Ported cylinder heads, badass valve train
Ls2 intake manifold
34lb injectors
HpTuners Ecu tuning software
Aeromotive Fpr
Aeromotive 340lb hr fuel pump
Braided fuel lines
Custom ground Comp Cam
2001 Camaro accessory drive
Mishimoto Radiator and fan
Power steering cooler
Sikky Conversion kit, 7 quart oil pan, CNC motor mounts Remote oil cooler lines and oil filter mount kit, aluminum driveshaft power steering adapter kit
Motul Engine Oil, Power Steering fluid, coolant additive,ATF, differential fluid, and axle boot grease
1 3/4" Sikky headers with 3" collectors to dual 3" Vibrant resonators to 5" merge to single 4" stainless exhaust
Exedy Twin disc clutch
T56 6 speed with upgraded Billet shift pads and recently replaced blocker ring for 2-3 gear
Os Giken 2 way differential
Stock axles

D2 Racing Drift Spec 32way adjustable Coilovers
SIKKY 32mm Tubular Sway Bar
Driftworks drop knuckles F-R
Spl outer tie rods
Tein inner tie rods
Iconcepts steering rack spacer
Modified front subframe that relocates rack approx 2" forward for better steering geometry.
Alexander Fabrication Heim / Gusset'd Flca's
Strut tower brace
Tein tension rods
Isis rear adjustable arms
SIKKY rear subframe risers
Z32 aluminum front brake calipers
Project Mu rear pads
Rear bbk upgraded rotor size with adapter bracket for caliper
Cosmis Racing MRII 17x9"+10 (2) front wheels 18x10.5" +20 (8)
235/40 17 Falken Azenis RT615k
275/35 18 Falken Azenis RT615k

Sparco Evo2 race seat
Sparco seat brackets custom mounted for low low seating position
G force camlock drivers harness
5lb Fire Suppression system
Remote Kill Switch
Auto meter voltage, oil pressure and water temp gauges
Switch panel with ign on toggle, push to start button and headlamp / wiper switches
Custom chassis harness all through vehicle
No factory fuses/ wiring what so ever
Alexander Fabrication "Formula Drift" spec roll cage, rear bash/jacking bar and front lower bumper protector bar.
Je Import Performance quick disconnect Tube Front.




Pictures:

https://scontent-a-lga.xx.fbcdn.net/...02900492_n.jpg

https://farm6.staticflickr.com/5497/...683215a0_b.jpghttps://farm3.staticflickr.com/2834/...d8a8f80f_b.jpghttps://farm3.staticflickr.com/2894/...0a23baf6_b.jpghttps://scontent-b-lga.xx.fbcdn.net/...58200231_n.jpghttps://scontent-a-lga.xx.fbcdn.net/...15876687_n.jpg.

Re: Nissan 240sx Drift Truck, SIKKY
 

This is badass!

Re: Nissan 240sx Drift Truck, SIKKY
 

Car is pure sex! Wow! Wish I had 20k! Glws and good luck with the drift scene!

Re: Nissan 240sx Drift Truck, SIKKY
 

Sold