FS: White 2003 Mitsubishi Evolution VIII
02-02-2008, 02:29 PM
#1
Fanatacism
Thread Starter
Join Date: May 2007
Posts: 644
Likes: 0
Received 0 Likes
on
0 Posts
FS: White 2003 Mitsubishi Evolution VIII
I am looking to sell my Evo VIII simply because due to college expenses I can no longer afford it. My loss is your gain.
-Mileage is, as of now 40k on chassis and 2k on a fully built 2.3l.
-Before it's downfall the car was running a stock 16g with a 10.5 hotside with forge actuator, on meth. Was dynoe'd at ~360whp (28psi+meth) on DTM's mustang dyno, which reads around 10-15% lower than a dynojet.
Mods were as listed:
-Built 2.0l 4g63
-HKS intake
-HKS Downpipe
-HKS Catback
-Buschur 680cc injectors
-Buschur upper i/c pipe,
-Supertech valves
-Supertech springs
-Supertech retainers
-Wiseco pistons,
-Pauter rods
-Comp Cams - 280's
-Race head ported by Turbo Trix
-Act 2900 clutch
-Findanza flywheel
-Cucsco shift knob
-Greddy boost gauge
-Blitz turbo timer
-Stainless Steel clutch line
-Sparco harnesses
-Evo 7 tails
-Black housing headlights
-Samco hoses
-Forge BOV
-Walboro 255LPH Fuel Pump
-RSR Lowering Springs
-Ferado 2500 Brake Pads
-Odyssey battery
-SMC dual stage alcohol injection
Was looking to get 23k obo.
I just got finished building the bottom end and re-used the already built head.
New mods as listed:
-Stroked 2.3l 4g63
-Wiseco pistons
-Carillo rods
-Arp's all the way round
-All new gaskets
-New oil pump
-Balance shaft eliminated
-New front mount w/ piping
-PTE 780's
-35r
-Tial 44mm external wastegate (dump)
-Downpipe
-Intake
Also replaced the clutch and flywheel with an Exedy single disc and a lightened flywheel.
I am rocking it wingless atm, but I do still have it..
I'm looking to get $27,000 nego/obo.
-Mileage is, as of now 40k on chassis and 2k on a fully built 2.3l.
-Before it's downfall the car was running a stock 16g with a 10.5 hotside with forge actuator, on meth. Was dynoe'd at ~360whp (28psi+meth) on DTM's mustang dyno, which reads around 10-15% lower than a dynojet.
Mods were as listed:
-Built 2.0l 4g63
-HKS intake
-HKS Downpipe
-HKS Catback
-Buschur 680cc injectors
-Buschur upper i/c pipe,
-Supertech valves
-Supertech springs
-Supertech retainers
-Wiseco pistons,
-Pauter rods
-Comp Cams - 280's
-Race head ported by Turbo Trix
-Act 2900 clutch
-Findanza flywheel
-Cucsco shift knob
-Greddy boost gauge
-Blitz turbo timer
-Stainless Steel clutch line
-Sparco harnesses
-Evo 7 tails
-Black housing headlights
-Samco hoses
-Forge BOV
-Walboro 255LPH Fuel Pump
-RSR Lowering Springs
-Ferado 2500 Brake Pads
-Odyssey battery
-SMC dual stage alcohol injection
Was looking to get 23k obo.
I just got finished building the bottom end and re-used the already built head.
New mods as listed:
-Stroked 2.3l 4g63
-Wiseco pistons
-Carillo rods
-Arp's all the way round
-All new gaskets
-New oil pump
-Balance shaft eliminated
-New front mount w/ piping
-PTE 780's
-35r
-Tial 44mm external wastegate (dump)
-Downpipe
-Intake
Also replaced the clutch and flywheel with an Exedy single disc and a lightened flywheel.
I am rocking it wingless atm, but I do still have it..
I'm looking to get $27,000 nego/obo.
Last edited by orrickr; 04-28-2008 at 07:09 PM. Reason: woot woot
02-02-2008, 06:01 PM
#2
learn me sum maff!
Join Date: Nov 2007
Location: Virginia
Posts: 350
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: White 2003 Mitsubishi Evolution VIII
bump
02-02-2008, 08:07 PM
#3
Banned
Join Date: Sep 2006
Location: Home.....dunno....I'm homeless
Posts: 7,780
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: White 2003 Mitsubishi Evolution VIII
why are your #'s so low? With a buit motor you should be atleast 450+ right?
02-02-2008, 08:31 PM
#4
MAGICAL FRIENDSHIP
Join Date: Jan 2006
Location: RVA
Posts: 3,852
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: White 2003 Mitsubishi Evolution VIII
Whats the motor "built" with?
You live right down the street from me btw, nice car
You live right down the street from me btw, nice car
02-02-2008, 08:39 PM
#5
❒Good ❒ Better ✔Best
Join Date: Nov 2002
Location: Fredericksburg
Posts: 4,598
Likes: 0
Received 0 Likes
on
0 Posts
02-02-2008, 08:57 PM
#6
.
Join Date: Feb 2003
Location: Colorado Springs
Posts: 8,339
Likes: 0
Received 0 Likes
on
0 Posts
02-03-2008, 02:03 AM
#7
Fanatacism
Thread Starter
Join Date: May 2007
Posts: 644
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: White 2003 Mitsubishi Evolution VIII
fyi when you built a turbo motor you build it to withstand, not to simply make.. thats where the forced induction comes in to play. So 360 on a mustang dyno with stock turbo + meth is fucking right dude.
-pauter rods
-weiseco pistons
-supertech valves, springs, retainers
-turbotrix head job
-comp 280's I/E
-pauter rods
-weiseco pistons
-supertech valves, springs, retainers
-turbotrix head job
-comp 280's I/E
02-03-2008, 05:39 AM
#8
Banned
Join Date: Jul 2006
Location: Virginia Beach
Posts: 1,032
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: White 2003 Mitsubishi Evolution VIII
that sounds about right for whp. are you willing to sell any parts off it?
02-03-2008, 06:15 AM
#9
learn me sum maff!
Join Date: Nov 2007
Location: Virginia
Posts: 350
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: White 2003 Mitsubishi Evolution VIII
bump for a nice car and a kid who doesn't like coffee...wow
02-03-2008, 12:01 PM
#10
Fanatacism
Thread Starter
Join Date: May 2007
Posts: 644
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: White 2003 Mitsubishi Evolution VIII
