aspen5

• Name: Joe
• Location: Rockville, MD
• Contact: PM or stlyj2@gmail.com
• Price: 13,000 will sell outright for what is remaining on the lien. Lien amount is less than asking price, so lien pay off would be minus some of the parts. PM me for details.

• Description: I am putting out a feeler to see if there is any interest out there for my car. I am not in a hurry to get rid of the car but would like to see what else is out there. I purchased the car in 2009 with 70,000 miles on it from a dealership in PA. I found out that it had a blown motor and turbo when I got it back down to Maryland. I took the vehicle to DPS to have them do a motor build on it. The car never ran very well after that as the bearing and ring clearances were not within spec. The vehicle eventually succumbed to another engine failure due to a fuel line popping off of the FPR. I threw a low mileage stock EJ257 motor in to the car which is what is in there now. The motor has approximately 40,000 miles on it while the chassis now has 110,000 miles on it. The car is currently having a cam timing issue which I am trying to resolve. The car runs and drives fine but once it warms up it tries to stall out due to the timing issue. I will try to get this problem resolved as soon as possible.

-Mileage: 110,00
-Exterior: 8 / 10
-Interior: 8.5 / 10
-Accidents: Car was rear ended by vehicle traveling at about 5 MPH at impact. No structure damage, taillight was replaced as well as rear bumper.
-Modifications:

Engine:Turbo XS FMIC
Turbo XS RFL Turbo back exhaust
Comes with muffler delete pipe
Greddy Type S BOV
Grimspeed EWG up pipe
Tial 38mm EWG
Greddy un-equal length headers
Tig Werks Oil pickup
Cusco Engine Mounts

Suspension:

RCE yellow springs
SPT STi (pink) trailing arms
SPT STi (pink) rear control arms
H brace
Rear strut tower brace
Whiteline polyurethane steering rack bushings
Whiteline 27mm rear sway bar
Whiteline 24mm front sway bar
Kartboy solid rear end links
Kartboy diff cradle bushing
Kartboy botox bolts

Trans:

ACT Heavy Duty six puck sprung clutch
Excedy streetlight flywheel
Kartboy shifter stay bushings
Kartboy Short shifter
Kartboy transmission bushings
Motul Fluids

Interior:

Defi link gauges 52mm Boost EGT Oil Pressure
Pioneer double din dvd/cd head unit
06 STi steering wheel
HKS turbo timer
Bee R rev limiter

Exterior:

Spec C replica front lip paint matched
Replica (can't think of the model) rear windshield spoiler
Rota Tarmac II 18x8 +48 225/35/R18 Nitto Neo Gens
Wingless Trunk

Extras:

Stock Sti trunk
Stock BBS / grey
Custom 3.5'' muffler delete axle back
built but blown EJ25 complete long block
many random pieces
5 additional matching defi link gauges BNIB
BNIB Hawk HPS brake pads
Good set of STi Rods
New set of main and rod bearings

There may be some things that I am forgetting about and I will list them as I think of them.

Bad: As stated earlier there is a camshaft timing issue, there is a minor burn crack on the rear bumper from running a straight pipe, minor dent on the driver side rear fender, minor crack in the front bumper underneath the FMIC, and a minor paint chip next to the passenger side headlight. Interior headliner will be cleaned. Minor chipping on the center console that was painted black. If you need pictures of anything else please let me know.

aspen5

Joepiper151

humm. I might be interested in trading my 350z for this if the stalling issue gets resolved. Would you be interested?

aspen5

Wouldn't be opposed, do you have pictures?

Joepiper151

Emailed you

accord94r

hey man are you interested in trading for my turbo RSX?
https://www.vadriven.com/forums/honda-101/2003-turbo-rsx-6-speed-%2Awarning-alot-pix%2A-404857/

aspen5

Pm's responded to. I still have a turbo four cylinder FWD car so I'm looking for either another AWD car or RWD car as a trade.

aspen5

insomnia bump

coreyg19

wouldnt be interested in a 2006 altima ser 6spd would you?

aspen5

Thank you for the offer but I'm not looking for another FWD at this time.