97 240sx Kouki S14 Heads Cam LS1 T56 (450whp, 2750lbs)
#1
Registered member
Thread Starter
Join Date: Nov 2009
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
97 240sx Kouki S14 Heads Cam LS1 T56 (450whp, 2750lbs)
Name: Chris Driver
Location: Forest Virginia
Means of contact: 434-942-5424 cdriver71@gmail.com
Price: $18,000
Description:
FOR SALE or TRADE
97 240sx LS1
113420 miles on Chassis
1200 miles on new setup
450rwhp... 2750 lbs wet
$18,000
Call me (Chris): 434-942-5424
or
e-mail: cdriver71@gmail.com
For more info, pics and video's check out the build thread:
http://ls1tech.com/forums/conversion...0sx-build.html
Motor
AFR 205 Heads 63cc
FAST 92mm Intake
FAST 92mm Throttle Body
Custom Comp Cam
SVO Red Injectors
7.425 Hardened Pushrods
N-Motion timing set
LS7 Lifter set
Cometic Head Gaskets .40
LS4 Oil Pump
ARP LS1 Cam Retainer Timing Bolt Kit
ARP Head Bolts
LS6 Valley Cover
Norris Motorsports Catch Can
160 Degree Thermostat
Camaro Accessories
Wazee's Aluminum PS Pulley
02 Camaro Wire Harness
02 Camaro PCM
C5 Z06 MAF
Custom Intake
Drivetrain
Rebuilt T56 with the good stuff can handle 700 ft lbs
Spec Stage 3+ Clutch
Spec Lightened Flywheel
Fueled Racing Aluminum Drive Shaft
S15 HLSD
Q45 3.54 Ring and Pinion Gears
Wilwood Clutch Master Cylinder
Earls SS Clutch Line
LAPD Clutch Bleed Line
Pro 5O Short Shifter with Steeda Tri-Ax Handle and Delrin Knob
Swap Parts
Fueled Racing Oil Pan
Fueled Racing Motor Mounts
Fueled Racing Trans Mount
Fueled Racing Aluminum Drive Shaft
Oil Filter Relocation Kit with Cooler
Exhaust
Fueled Racing 1.75" Headers
Custom 3" X-Pipe
Custom Dual 2.5" Straight Through SS Mufflers
Chassis
Walbro 255 Fuel Pump
-10 AN SS Line Fuel Line AN Fittings
Corvette Fuel Pressure Regulator/Filter
Power Steering Cooler -8 SS Line AN Fittings
Koyo Rad Aluminum Radiator
Mishimoto Slim Dual Electric Fans
Interior
Sparco 383 Black Suede 330mm Steering wheel
Slash Works Bell 620 Steering Wheel Hub Kit
Stock Tach works
Stock Speedo Works
Fuel Gauge Works
AEM Wide Band O2 Gauge 52mm
Prosport 52 mmPremium Oil Pressure Gauge
Dual A-Pillar Gauge mount
Dash and center consol in awesome condition
Stock Seats, no Rear Seats
Suspension
Fortune Auto 500 Series Coil Overs
Powered By Max Rear Upper Control Arms
Powered By Max Traction Rods
Powered By Max Toe Rods
Powered By Max Tension Rods
Powered By Max Subframe Collars
Brakes
New Nissan 1" Brake Master Cylinder
Wilwood Superlights (Front)
350Z Track Edition Rotors (Front)
2Fass240us Custom Brackets (Front)
Wilwood Pads (Front)
300ZX Z32 Rear Brakes
Hawk Pads (Rear)
R33 E-Brake Cables
Wheels & Tires
9.5" X 17" Gunmetal MB Battles Wheels
Nitto NTO5 255/40/17's (Front)
Nitto NTO5 275/40/17's (Rear)
http://www.youtube.com/watch?v=tizZKEYF4Zc
Location: Forest Virginia
Means of contact: 434-942-5424 cdriver71@gmail.com
Price: $18,000
Description:
FOR SALE or TRADE
97 240sx LS1
113420 miles on Chassis
1200 miles on new setup
450rwhp... 2750 lbs wet
$18,000
Call me (Chris): 434-942-5424
or
e-mail: cdriver71@gmail.com
For more info, pics and video's check out the build thread:
http://ls1tech.com/forums/conversion...0sx-build.html
Motor
AFR 205 Heads 63cc
FAST 92mm Intake
FAST 92mm Throttle Body
Custom Comp Cam
SVO Red Injectors
7.425 Hardened Pushrods
N-Motion timing set
LS7 Lifter set
Cometic Head Gaskets .40
LS4 Oil Pump
ARP LS1 Cam Retainer Timing Bolt Kit
ARP Head Bolts
LS6 Valley Cover
Norris Motorsports Catch Can
160 Degree Thermostat
Camaro Accessories
Wazee's Aluminum PS Pulley
02 Camaro Wire Harness
02 Camaro PCM
C5 Z06 MAF
Custom Intake
Drivetrain
Rebuilt T56 with the good stuff can handle 700 ft lbs
Spec Stage 3+ Clutch
Spec Lightened Flywheel
Fueled Racing Aluminum Drive Shaft
S15 HLSD
Q45 3.54 Ring and Pinion Gears
Wilwood Clutch Master Cylinder
Earls SS Clutch Line
LAPD Clutch Bleed Line
Pro 5O Short Shifter with Steeda Tri-Ax Handle and Delrin Knob
Swap Parts
Fueled Racing Oil Pan
Fueled Racing Motor Mounts
Fueled Racing Trans Mount
Fueled Racing Aluminum Drive Shaft
Oil Filter Relocation Kit with Cooler
Exhaust
Fueled Racing 1.75" Headers
Custom 3" X-Pipe
Custom Dual 2.5" Straight Through SS Mufflers
Chassis
Walbro 255 Fuel Pump
-10 AN SS Line Fuel Line AN Fittings
Corvette Fuel Pressure Regulator/Filter
Power Steering Cooler -8 SS Line AN Fittings
Koyo Rad Aluminum Radiator
Mishimoto Slim Dual Electric Fans
Interior
Sparco 383 Black Suede 330mm Steering wheel
Slash Works Bell 620 Steering Wheel Hub Kit
Stock Tach works
Stock Speedo Works
Fuel Gauge Works
AEM Wide Band O2 Gauge 52mm
Prosport 52 mmPremium Oil Pressure Gauge
Dual A-Pillar Gauge mount
Dash and center consol in awesome condition
Stock Seats, no Rear Seats
Suspension
Fortune Auto 500 Series Coil Overs
Powered By Max Rear Upper Control Arms
Powered By Max Traction Rods
Powered By Max Toe Rods
Powered By Max Tension Rods
Powered By Max Subframe Collars
Brakes
New Nissan 1" Brake Master Cylinder
Wilwood Superlights (Front)
350Z Track Edition Rotors (Front)
2Fass240us Custom Brackets (Front)
Wilwood Pads (Front)
300ZX Z32 Rear Brakes
Hawk Pads (Rear)
R33 E-Brake Cables
Wheels & Tires
9.5" X 17" Gunmetal MB Battles Wheels
Nitto NTO5 255/40/17's (Front)
Nitto NTO5 275/40/17's (Rear)
http://www.youtube.com/watch?v=tizZKEYF4Zc
Last edited by Driver; 09-08-2011 at 01:20 PM.
#2
nowhere real fast
Join Date: Sep 2010
Location: norfolk
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Re: 97 240sx Kouki S14 Heads Cam LS1 T56 (450whp, 2750lbs)
bad ass,
#3
The Rotary MadMax
Join Date: May 2011
Location: Fredericksburg
Posts: 436
Likes: 0
Received 0 Likes
on
0 Posts
Re: 97 240sx Kouki S14 Heads Cam LS1 T56 (450whp, 2750lbs)
A Nissan with a Chevy engine and Ford transmission.
Nice! How hard is it to keep the rear wheels planted?
Nice! How hard is it to keep the rear wheels planted?
#4
Registered member
Thread Starter
Join Date: Nov 2009
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
Re: 97 240sx Kouki S14 Heads Cam LS1 T56 (450whp, 2750lbs)
I put the 3.54 gears in and that helps a lot. With these 200 tread were rating tires it can spin 1st anytime but 2nd gear at a 40 roll is deadly. With drag radials it would hook really well. It actually does better than I thought it would.
#5
The Rotary MadMax
Join Date: May 2011
Location: Fredericksburg
Posts: 436
Likes: 0
Received 0 Likes
on
0 Posts
Re: 97 240sx Kouki S14 Heads Cam LS1 T56 (450whp, 2750lbs)
Ahhh, thought the T45/T56 were Mustang things. It's all i've had, so all i've thought =P
Sick car man, good luck!
Sick car man, good luck!
#6
RIP DRAGVA-2016
Join Date: Sep 2008
Location: super secret
Posts: 17,242
Likes: 0
Received 0 Likes
on
0 Posts
Re: 97 240sx Kouki S14 Heads Cam LS1 T56 (450whp, 2750lbs)
This is sick
#8
Registered member
Thread Starter
Join Date: Nov 2009
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
Re: 97 240sx Kouki S14 Heads Cam LS1 T56 (450whp, 2750lbs)
I would like to keep but I sold my house with the 2 car garage and have a gravel driveway now. No place to work on it and no place to keep it really.
#9
HIGH FIVE!
Join Date: Apr 2005
Location: Awesometown
Posts: 2,045
Likes: 0
Received 0 Likes
on
0 Posts
Re: 97 240sx Kouki S14 Heads Cam LS1 T56 (450whp, 2750lbs)
WOW. Seriously can't believe you're selling the car. Although I can't believe you sold the house either! lol This car is absolutely awesome. So much dedication and attention to detail. Cleanest LSX swap I've ever seen. Bump for a great guy and an awesome car.
#10
Re: 97 240sx Kouki S14 Heads Cam LS1 T56 (450whp, 2750lbs)
this car makes me want to put a ls1 in my car badly!!! glws super fresh! wish u were open to a trade for a built rb25