91' Toyota Pickup
#1
Registered Member
Thread Starter
Join Date: May 2008
Location: Hampton, VA
Posts: 1,210
Likes: 0
Received 0 Likes
on
0 Posts
91' Toyota Pickup
Name: Mike
Location: Hampton, VA
Contact: 757-848-7709, this thread, or pm
Price: $2000 OBO
My dad and I bought this truck because we had a 22re we were building and bought this to put it in. The body is in pretty good condition. The graphics on it came like that from the factory. I also have a 22R (carbureted) rebuilt bottom end and two heads for a 22R/RE if anyone is interested. The link, among others is in my sig. Here is some more info:
-22RE engine (fuel injected) just completely rebuilt, has about 20-30 miles on it. head was shaved .006" and deck was shaved .008". has a lc engineering adjustable cam gear to make sure cam/crank timing is correct.
-5 speed transmission
-215,207 miles on chassis, and it is still in great shape
-good tires on good wheels
-good inspection
-working ac and heat
-two xplod 6x9 speakers behind the seats (the guy i bought it from cut holes in the door panels to put them in but they are too deep and the window will hit them when it rolls down, so i took them out)
That's all I can think of right now, here are some pictures. If you have any questions, feel free to contact me anytime. Link to album that has many more pics: 1991 Toyota Pickup and engine
Location: Hampton, VA
Contact: 757-848-7709, this thread, or pm
Price: $2000 OBO
My dad and I bought this truck because we had a 22re we were building and bought this to put it in. The body is in pretty good condition. The graphics on it came like that from the factory. I also have a 22R (carbureted) rebuilt bottom end and two heads for a 22R/RE if anyone is interested. The link, among others is in my sig. Here is some more info:
-22RE engine (fuel injected) just completely rebuilt, has about 20-30 miles on it. head was shaved .006" and deck was shaved .008". has a lc engineering adjustable cam gear to make sure cam/crank timing is correct.
-5 speed transmission
-215,207 miles on chassis, and it is still in great shape
-good tires on good wheels
-good inspection
-working ac and heat
-two xplod 6x9 speakers behind the seats (the guy i bought it from cut holes in the door panels to put them in but they are too deep and the window will hit them when it rolls down, so i took them out)
That's all I can think of right now, here are some pictures. If you have any questions, feel free to contact me anytime. Link to album that has many more pics: 1991 Toyota Pickup and engine
Last edited by disheeki546; 07-23-2009 at 12:24 PM.
#7
Registered Member
Thread Starter
Join Date: May 2008
Location: Hampton, VA
Posts: 1,210
Likes: 0
Received 0 Likes
on
0 Posts
#9
Registered Member
Thread Starter
Join Date: May 2008
Location: Hampton, VA
Posts: 1,210
Likes: 0
Received 0 Likes
on
0 Posts
Re: 91' Toyota Pickup
as much as i hate to do this: i was going to adjust the cam timing today to take out the little spark knock it had. i ended up pulling the head and found much more problems. long story short, i have to pull the engine again and put the other rebuilt one in that we have. what will be put in: a 22RE block with zero miles and standard bearings and bore. (the same one that is in my other thread for a 22r block and heads) and the shaved head off the one that is in it that has like 30 miles on it. should be done very soon and running very strong. pm for information about what happened.
i have the receipt from abacus racing in va beach for all the machine work that was done. the building was done by me. i did use a full rebuild kit, which i have no receipt for, but most of that was put in the bottom end that is being taken out now. the new block i used a rebuild kit with standard bearings that came with one of the trucks i have. i do not have a receipt for it either because i did not buy it.
i have the receipt from abacus racing in va beach for all the machine work that was done. the building was done by me. i did use a full rebuild kit, which i have no receipt for, but most of that was put in the bottom end that is being taken out now. the new block i used a rebuild kit with standard bearings that came with one of the trucks i have. i do not have a receipt for it either because i did not buy it.
Thread
Thread Starter
Forum
Replies
Last Post