550+rwhp Turbo s2000
#1
Registered Member
Thread Starter
Join Date: May 2004
Location: 703
Posts: 588
Likes: 0
Received 0 Likes
on
0 Posts
550+rwhp Turbo s2000
name
shaun Robinson
phone
540-514-9944
place
sterling va
2001 s2000 with 60000 miles.
$27000 firm. I can work with you but not that much.
Some of you guys know the car. I have had it for along time but its time to step up and get a new car. Here's a list of stuff that is done to the car.
Built motor
Aries custom pistons
carallio (sp) rods
darton sleeves
blue printed
all ARP hardwear, rod, head, intake, exhaust, ext bolts.
Turbo kit
inlinepro kit
Custom 67mm turbo, just put on the car
1000cc injectors
oil filter relocated with all a/n lines
the largest k/n filter you can get on there.
everything is heat wraped from the mani past the flex pipe.
3in exhaust turbo back.
Inside
drivers seat is a brand new sparco evo. Pass side is a kirkey.
6 point sparco harness on pass side and a 5 point on drivers, both belts are good to 2011.
8 point cage that is made of 4130 crmo. It will be NHRA cert to 9.59
a/c works
heat works
Trans
1-4 has new gears with carbon a
Diff
300zx rear end with drive shaft shop axels and drive shaft
inline upgraded brackets.
The bumper has new paint
the fenders have dents and could be painted.
Here's the deal, I plan on getting a new fuel system. With that the car will make over 650rwhp. I will let the car go for 25000 as is or 27000 with the fuel system and carbon fenders
shaun Robinson
phone
540-514-9944
place
sterling va
2001 s2000 with 60000 miles.
$27000 firm. I can work with you but not that much.
Some of you guys know the car. I have had it for along time but its time to step up and get a new car. Here's a list of stuff that is done to the car.
Built motor
Aries custom pistons
carallio (sp) rods
darton sleeves
blue printed
all ARP hardwear, rod, head, intake, exhaust, ext bolts.
Turbo kit
inlinepro kit
Custom 67mm turbo, just put on the car
1000cc injectors
oil filter relocated with all a/n lines
the largest k/n filter you can get on there.
everything is heat wraped from the mani past the flex pipe.
3in exhaust turbo back.
Inside
drivers seat is a brand new sparco evo. Pass side is a kirkey.
6 point sparco harness on pass side and a 5 point on drivers, both belts are good to 2011.
8 point cage that is made of 4130 crmo. It will be NHRA cert to 9.59
a/c works
heat works
Trans
1-4 has new gears with carbon a
Diff
300zx rear end with drive shaft shop axels and drive shaft
inline upgraded brackets.
The bumper has new paint
the fenders have dents and could be painted.
Here's the deal, I plan on getting a new fuel system. With that the car will make over 650rwhp. I will let the car go for 25000 as is or 27000 with the fuel system and carbon fenders
Last edited by BLKTURBOS2K; 03-18-2008 at 02:38 PM.
#4
Registered Member
Thread Starter
Join Date: May 2004
Location: 703
Posts: 588
Likes: 0
Received 0 Likes
on
0 Posts
#6
Registered member
Join Date: Jan 2004
Location: Winchester
Posts: 3,972
Likes: 0
Received 0 Likes
on
0 Posts
Re: f/s 550+rwhp Turbo s2000
I can vouch, great guy, great seller, Fast and very pretty car. Hey shawn you forgot to say you have AEM EMS thats tuned in the car for both pump and race gas.
#7
I got boost!
Join Date: Feb 2006
Location: Midlothian
Posts: 330
Likes: 0
Received 0 Likes
on
0 Posts
Re: f/s 550+rwhp Turbo s2000
What clutch is in the car? Does the drivers seat move back? I'm 6'4" and that seat looks to close to the steering wheel. I would love to take this car off your hands.
#8
Registered Member
Thread Starter
Join Date: May 2004
Location: 703
Posts: 588
Likes: 0
Received 0 Likes
on
0 Posts
Re: f/s 550+rwhp Turbo s2000
Im 6.1 and 195lbs The seat is on Sparco seat mounts, all you have to do to move it is unbolt it and move it back. There are about 5 diff setting you can use
#9
Registered Member
Thread Starter
Join Date: May 2004
Location: 703
Posts: 588
Likes: 0
Received 0 Likes
on
0 Posts
Re: f/s 550+rwhp Turbo s2000
Sorry, I have a 4 puck C/C with the strongest P/P they make and a 8lb flywheel. Belive it or not the clutch is soft but it grabs like a bitch.
#10
Registered Member
Thread Starter
Join Date: May 2004
Location: 703
Posts: 588
Likes: 0
Received 0 Likes
on
0 Posts
Re: f/s 550+rwhp Turbo s2000
Like I said, inlines car made 630rwhp with 1000cc injectors, 1 255 pump, stock lines, and a fuel rail.
Hell, I might get 1600cc injectors
oh, I also have aeromotive FPR
AEM wideband
boost and water temp gauge
NT555r tires
and lots of extra parts