2003 Civic Si - K20a3
#1
Registered Member
Thread Starter
Join Date: Dec 2008
Location: Richmond
Posts: 865
Likes: 0
Received 0 Likes
on
0 Posts
2003 Civic Si - K20a3
Name- Ben
Location- Richmond
Contact- PM or call/text cell 804 641 5150
Price- $9500 OBO
Well its up forsale again. I recently got a raise at work and am in the market for somthing a little newer. The car has 93xxx miles on the shell and motor. The motor pulls very well for a stock a3. I had it baseline dynoed at Adrinaline Autoworks and it made 157whp 131 tourqe. I recently did a tune up on the motor and breaks including all new break pads, new plugs, valve lash adjustment, trans flush, and new K & N intake filter. The oil is changed every 2k miles with 0w-20 Mobil 1 Sythetic oil and MO oil filter during the summer and spring, and during the winter i run Royal Purple 5w-20 w/ a MO oil filter. The car has recently been fully detailed with clay bar and full wax with buffer. I just also got BRAND NEW EP3 Si floor mats from Mechanicsville Honda. Now on to the good stuff...
NO TRADES!!!!!
NOTE- All parts were installed with in the last 6 months
Motor- K20a3
-AEM Cold air intake
-K&N intake filter
-Skunk2 70mm cat back exhaust
-Magnaflow High Flow cat (exhaust isnt loud ive never been pulled)
Trans-
-Exedy Stage 2 clutch
-Stock resurfaced flywheel
-Nuespeed Short shifter adapter braket
-BG Syncroshift
Suspension-
-Nuespeed Springs
-Comtech titanium Series Strut Bar
-Custom rear strut brace
Exterior-
-Konig Deadline rims 17"
-New Nexen N5000 tires
-Carbon fiber gas door
-20% tint
-CTR Headlights
-10k HIDs
Interior-
Alpine CD deck(new)
Skunk2 shift knob
New Si floor mats
Wired for subs but i have none in the car
The good-
car is in great shape and runs like a champ, also great on gas
The bad-
CEL light is on for O2 sensor due to high flow cat, i will get this fixed before sale but it never bothers me
-One small dint the size of a half dollar coin that can be popped out and one small scratch about 2 inches long
Needs camber kit in the rear.
This pic you can see the camber(-4) even though there is horrible camber the tires are so new that there isnt any camber wear..yet
Please no bashing, Thanks
Location- Richmond
Contact- PM or call/text cell 804 641 5150
Price- $9500 OBO
Well its up forsale again. I recently got a raise at work and am in the market for somthing a little newer. The car has 93xxx miles on the shell and motor. The motor pulls very well for a stock a3. I had it baseline dynoed at Adrinaline Autoworks and it made 157whp 131 tourqe. I recently did a tune up on the motor and breaks including all new break pads, new plugs, valve lash adjustment, trans flush, and new K & N intake filter. The oil is changed every 2k miles with 0w-20 Mobil 1 Sythetic oil and MO oil filter during the summer and spring, and during the winter i run Royal Purple 5w-20 w/ a MO oil filter. The car has recently been fully detailed with clay bar and full wax with buffer. I just also got BRAND NEW EP3 Si floor mats from Mechanicsville Honda. Now on to the good stuff...
NO TRADES!!!!!
NOTE- All parts were installed with in the last 6 months
Motor- K20a3
-AEM Cold air intake
-K&N intake filter
-Skunk2 70mm cat back exhaust
-Magnaflow High Flow cat (exhaust isnt loud ive never been pulled)
Trans-
-Exedy Stage 2 clutch
-Stock resurfaced flywheel
-Nuespeed Short shifter adapter braket
-BG Syncroshift
Suspension-
-Nuespeed Springs
-Comtech titanium Series Strut Bar
-Custom rear strut brace
Exterior-
-Konig Deadline rims 17"
-New Nexen N5000 tires
-Carbon fiber gas door
-20% tint
-CTR Headlights
-10k HIDs
Interior-
Alpine CD deck(new)
Skunk2 shift knob
New Si floor mats
Wired for subs but i have none in the car
The good-
car is in great shape and runs like a champ, also great on gas
The bad-
CEL light is on for O2 sensor due to high flow cat, i will get this fixed before sale but it never bothers me
-One small dint the size of a half dollar coin that can be popped out and one small scratch about 2 inches long
Needs camber kit in the rear.
This pic you can see the camber(-4) even though there is horrible camber the tires are so new that there isnt any camber wear..yet
Please no bashing, Thanks
Last edited by NismoPowerdQG; 11-09-2009 at 03:41 PM.
#3
Registered Member
Thread Starter
Join Date: Dec 2008
Location: Richmond
Posts: 865
Likes: 0
Received 0 Likes
on
0 Posts
#4
Registered Member
Thread Starter
Join Date: Dec 2008
Location: Richmond
Posts: 865
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2003 Civic Si - K20a3
ttmft
#5
Registered Member
Thread Starter
Join Date: Dec 2008
Location: Richmond
Posts: 865
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2003 Civic Si - K20a3
eoirgtnjo
#6
Registered Member
Thread Starter
Join Date: Dec 2008
Location: Richmond
Posts: 865
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2003 Civic Si - K20a3
...........obo..................
#7
Registered Member
Thread Starter
Join Date: Dec 2008
Location: Richmond
Posts: 865
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2003 Civic Si - K20a3
over 250 looks and no offers
#8
Registered Member
Thread Starter
Join Date: Dec 2008
Location: Richmond
Posts: 865
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2003 Civic Si - K20a3
top
#9
Registered Member
Join Date: Dec 2007
Location: Glen Allen, VA
Posts: 514
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2003 Civic Si - K20a3
Bump for a fellow si owner, see this car everyday at school well kept and very fresh glws.
#10
Registered Member
Thread Starter
Join Date: Dec 2008
Location: Richmond
Posts: 865
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2003 Civic Si - K20a3
thanks man