1991 mr2 turbo gen3
10-14-2011, 03:00 PM
#1
Registered Member
Thread Starter
Join Date: May 2011
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
1991 mr2 turbo gen3
Name: Jesse
Location: Newport news
Means of contact: pm
Price: $5000
Description:
1991 MR2 NA Gen 3 swap
MINI Cooper Gold 1 year old paint job.
Wing removed and holes welded closed
Gen 3 swapped in July 2010 but have since blown 2 ring lands because of a faulty emanage unit.
Stock Block
AC unit removed but will include in the sale
ATS TD06 20G turbocharger $2,100
Tial 38mm external wastegate
Machined (not cast) turbo adaptor with wastegate flange
Screamer pipe
3" down pipe to KO Racing dual exhaust
Trubo Smart BOV
Trunk mount intercooler
Aluminum Intercooler exit rear under scoop
Walbro 255 Fuel pump
Greddy Emanage ultimate
AEM Ugeo A/f gauge
Auto meter phantom Boost gauge
OBX Short Shift
Stainless Steal Brake lines
Cross Drilled Rotors
Tein coilovers
VOLK SE37 17x8.5 17x7.5
New Maxxis 235 rear
New T-top weather stripping left and right
This swap had less than 1000miles on it. The engine is currently disassembled and ready for rebuild. I also have a complete engine gasket set to go with it. You would only need 2 pistons a set of rings and possibly some main bearings since it's out. It was dynoed at 265rwhp with a very conservative tune. Parts alone are more than the price I'm asking.
Willing to trade just about anything. Started a new work schedule and won't have time to work on it for about 6 months.
Pictures:
Pic of engine before I pulled it.
Location: Newport news
Means of contact: pm
Price: $5000
Description:
1991 MR2 NA Gen 3 swap
MINI Cooper Gold 1 year old paint job.
Wing removed and holes welded closed
Gen 3 swapped in July 2010 but have since blown 2 ring lands because of a faulty emanage unit.
Stock Block
AC unit removed but will include in the sale
ATS TD06 20G turbocharger $2,100
Tial 38mm external wastegate
Machined (not cast) turbo adaptor with wastegate flange
Screamer pipe
3" down pipe to KO Racing dual exhaust
Trubo Smart BOV
Trunk mount intercooler
Aluminum Intercooler exit rear under scoop
Walbro 255 Fuel pump
Greddy Emanage ultimate
AEM Ugeo A/f gauge
Auto meter phantom Boost gauge
OBX Short Shift
Stainless Steal Brake lines
Cross Drilled Rotors
Tein coilovers
VOLK SE37 17x8.5 17x7.5
New Maxxis 235 rear
New T-top weather stripping left and right
This swap had less than 1000miles on it. The engine is currently disassembled and ready for rebuild. I also have a complete engine gasket set to go with it. You would only need 2 pistons a set of rings and possibly some main bearings since it's out. It was dynoed at 265rwhp with a very conservative tune. Parts alone are more than the price I'm asking.
Willing to trade just about anything. Started a new work schedule and won't have time to work on it for about 6 months.
Pictures:
Pic of engine before I pulled it.
Last edited by GeekUs; 10-14-2011 at 03:22 PM.
10-15-2011, 10:45 AM
#2
Registered Member
Thread Starter
Join Date: May 2011
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1991 mr2 turbo gen3
Bump for trades
10-16-2011, 05:03 AM
#3
Registered Member
Thread Starter
Join Date: May 2011
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1991 mr2 turbo gen3
Bump for mistertwo
10-18-2011, 05:37 AM
#4
Registered Member
Join Date: Aug 2011
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1991 mr2 turbo gen3
will you trade for a 1997 prelude? clean and stock. email me danielculler@gmail.com
10-18-2011, 01:48 PM
#5
Registered Member
Thread Starter
Join Date: May 2011
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1991 mr2 turbo gen3
will you trade for a 1997 prelude? clean and stock. email me danielculler@gmail.com
10-18-2011, 05:29 PM
#6
Registered Member
Join Date: Dec 2010
Location: Grasonville Md
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1991 mr2 turbo gen3
interested in a white 91 240sx sr20 swapped 57 trim turbo front mount new clutch tuned on nistune many other mods
10-19-2011, 04:37 AM
#7
Registered Member
Join Date: Dec 2010
Location: Grasonville Md
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1991 mr2 turbo gen3
here are a few pics contact me for a full build sheet
10-19-2011, 07:51 AM
#8
Registered Member
Thread Starter
Join Date: May 2011
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1991 mr2 turbo gen3
Nice looking car. Sadly I am so against the fastbacks...I just can't get past them, sigh otherwise I'd be on it..
10-22-2011, 07:31 PM
#9
Registered Member
Thread Starter
Join Date: May 2011
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1991 mr2 turbo gen3
Bump before it goes into the machine shop for a rebuild.
10-24-2011, 12:19 PM
#10
Registered Member
Join Date: Oct 2011
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1991 mr2 turbo gen3
bump