1987 Turbo II re-shelled in 86 base model, project, no sunroof, manual windows.
#1
86 Mazda RX-7 Turbo II, project, no sunroof, manual everything, lightest 2nd gen made
Name: David
Location: Greenville VA
Means of contact: PM
Price: $ 2500
For sale: 1986 base model rx7 with all 87 Turbo II running gear swapped in (engine, trans, diff, both sub frames, suspension, brakes). Plus all my 2nd gen parts.
The car will start but won’t idle. The car was street tuned with the megasquirt and ran pretty well, however it has been sitting and is not running correctly.
The shell is very solid with original paint (clear coat is peeling) and it had a clean carfax from when I bought it. Minor front damage to the upper rad core support, see the pics, Bumper cover and fenders replaced by previous owner, headlight covers are original and the original hood was on the car when I got it.
$2500, negotiable
price drop:
$1900 for the car.
$2300 for the car and the intercooler
- No sunroof
- No AC
- No power steering
- Hand crank windows
- Non electric door mirrors.
- engine
- Street port
- 3rd gen corner seals and springs
- Stock 3 piece apex seals
- K2RD block of plates
- Port matched intake manifolds
- Metal radiator
- Walboro 255
- Generic beehive blow off valve
- Ported wastage
- Innovative lc-1 wideband
- racing beat down pipe and mid pipe + spare racing beat down pipe with catalytic convertor
- Oil pressure, oil temp and water temp gauges
- Mega squirt
- Air to water intercooler (new, not installed, see pics)
- Made 225 hp on OLD tune with microtec
- New clutch (I can’t find the receipt for this, I will post the specs when I find them), New clutch master cylinder
- Windshield replaced
- RSR lowering springs
- KYB AGX adjustable shocks
- Stainless braided lines brake lines.
- Steel turbo II hood, beat to hell.
- Needs tires
- No front carpet
Pictures:
[ATTACH=CONFIG]183934[/ATTACH][ATTACH=CONFIG]183935[/ATTACH]
more pictures here
RX-7 RX7 Mazda FC3s fc Turbo TurboII
Location: Greenville VA
Means of contact: PM
Price: $ 2500
For sale: 1986 base model rx7 with all 87 Turbo II running gear swapped in (engine, trans, diff, both sub frames, suspension, brakes). Plus all my 2nd gen parts.
The car will start but won’t idle. The car was street tuned with the megasquirt and ran pretty well, however it has been sitting and is not running correctly.
The shell is very solid with original paint (clear coat is peeling) and it had a clean carfax from when I bought it. Minor front damage to the upper rad core support, see the pics, Bumper cover and fenders replaced by previous owner, headlight covers are original and the original hood was on the car when I got it.
$2500, negotiable
price drop:
$1900 for the car.
$2300 for the car and the intercooler
- No sunroof
- No AC
- No power steering
- Hand crank windows
- Non electric door mirrors.
- engine
- Street port
- 3rd gen corner seals and springs
- Stock 3 piece apex seals
- K2RD block of plates
- Port matched intake manifolds
- Metal radiator
- Walboro 255
- Generic beehive blow off valve
- Ported wastage
- Innovative lc-1 wideband
- racing beat down pipe and mid pipe + spare racing beat down pipe with catalytic convertor
- Oil pressure, oil temp and water temp gauges
- Mega squirt
- Air to water intercooler (new, not installed, see pics)
- Made 225 hp on OLD tune with microtec
- New clutch (I can’t find the receipt for this, I will post the specs when I find them), New clutch master cylinder
- Windshield replaced
- RSR lowering springs
- KYB AGX adjustable shocks
- Stainless braided lines brake lines.
- Steel turbo II hood, beat to hell.
- Needs tires
- No front carpet
Pictures:
[ATTACH=CONFIG]183934[/ATTACH][ATTACH=CONFIG]183935[/ATTACH]
more pictures here
RX-7 RX7 Mazda FC3s fc Turbo TurboII
Last edited by SpaceManMort; 01-01-2015 at 07:09 AM. Reason: update title to include the make and model
#2
Re: 1987 Turbo II re-shelled in 86 base model, project, no sunroof, manual windows.
also, i can include the 17" wheels and tires from my 93 rx. buyer will need to provide wheel spacers.
pic https://www.flickr.com/photos/787679...57604123708936
pic https://www.flickr.com/photos/787679...57604123708936
#3
Re: 1987 Turbo II re-shelled in 86 base model, project, no sunroof, manual windows.
bump
Thread title updated to include the make and model of the car. (edit: or not, is it possible to update the thread title?)
it is rough, but a good starting point for someone who wants a light weight RX-7 or needs the extra head room.
Thread title updated to include the make and model of the car. (edit: or not, is it possible to update the thread title?)
it is rough, but a good starting point for someone who wants a light weight RX-7 or needs the extra head room.
Last edited by SpaceManMort; 10-31-2014 at 03:22 PM.
#4
Registered member
Join Date: Dec 2007
Location: Charlottesville, VA
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1987 Turbo II re-shelled in 86 base model, project, no sunroof, manual windows.
trades?
#5
Re: 1987 Turbo II re-shelled in 86 base model, project, no sunroof, manual windows.
Message a mod, they will help you out with changing the title.
#6
Forcibly Repped
Join Date: Aug 2006
Location: Richmond
Posts: 1,915
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1987 Turbo II re-shelled in 86 base model, project, no sunroof, manual windows.
Mort I wish I had time for a project like this, I've been been missing the rotaries, and it would be a farily easy start.
Unfortunately I have a 911 to unload first, and credit cards to pay off, and probably a garage to build.
Unfortunately I have a 911 to unload first, and credit cards to pay off, and probably a garage to build.
#7
Re: 1987 Turbo II re-shelled in 86 base model, project, no sunroof, manual windows.
Possibly, let me know what you have. The main thing I am looking for at the moment is a Volvo 240 / 740 / 940, 2 or 4 door, no wagons. Or a rabbit / golf / Jetta, mk 1 or 2
Ok, I will, thanks.
I feel your pain, I’m trying to sell this because I have to many projects and not enough time or money.
also, asking price drop to $2000 for the car, and $2400 for the car and the intercoler.
Ok, I will, thanks.
also, asking price drop to $2000 for the car, and $2400 for the car and the intercoler.
#8
Registered member
Join Date: Dec 2007
Location: Charlottesville, VA
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1987 Turbo II re-shelled in 86 base model, project, no sunroof, manual windows.
trade for a Turbo 92 Miata. has a torsen lsd, megasquirt pnp, innovate wideband, turbo timer, FMIC, 550cc rx7 injectors, flyin miata 2.5" stainless catback 2.5" dp, 2-1/4" test pipe made out of a factory cat (a pipe welded in, not just gutted). it runs and drives (very very loudly) it needs a new turbo manifold, i would also include a number of spare parts including a cast iron t3 manifold, and t25 ball bearing garrett turbo, and a t3-t25 manifold adapter. it also desperately needs a top. there's more mods i'm forgetting i'm sure. contact me if interested.
EDIT: remembered about the Eibach Pro Kit lowering springs also
EDIT: remembered about the Eibach Pro Kit lowering springs also
Last edited by f1luva92; 12-06-2014 at 02:11 AM.
#9
Re: 1987 Turbo II re-shelled in 86 base model, project, no sunroof, manual windows.
the Miata sounds fun, but i cant justify another 2 seat sports car at the moment.
Thanks though
Thanks though
#10
Re: 1987 Turbo II re-shelled in 86 base model, project, no sunroof, manual windows.
BUMP
very motivated to sell before the new year.
Temporary price drop:
$1700.00 for the car.
$2000.00 for the car and the intercooler
Newyears day the price is back to $2000 for the car, and $2400 for the car and intercooler.
very motivated to sell before the new year.
Temporary price drop:
$1700.00 for the car.
$2000.00 for the car and the intercooler
Newyears day the price is back to $2000 for the car, and $2400 for the car and intercooler.
Last edited by SpaceManMort; 01-01-2015 at 07:09 AM.