wire tucked jdm gsr integra
12-07-2012, 08:28 AM
#1
Registered Member
Thread Starter
Join Date: Dec 2012
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
wire tucked jdm gsr integra
Name: joey
Location: roanoke
Means of contact: text or call (540) 597 6377
Price: $6200 cash need gone
Description: I have a 95 inetgra gsr with a gsr motor bought two years ago from tigerjapanese.com. B16 cable tranny with the hasport conversion is in the car now cause the gsr hyrdo crapped out on me lol. The tranny is lsd and has a stage one exedy clutch. HASPORT mounts all the way around with dc header and 2 1/2 exhaust. The motor has a intake and throttle body and aem fuel rail with blox fuel gauge and fuel regulater. benen indus. strut tower bar full engine bay tuck and paint. Rebuilt calipers all the way around and kyb agx struts with shunk 2 coilovers. Type r valve cover. All molding was shaved off and car was repainted a bright white once the clip was done. Green rota gt3's for the wheels and crossed drilled rotors. Leather seats front and rear and batt in hatch area. front and rear camber kits as well. Wink mirror and hasport linkage with short shifter.
There is so much done to the car i cant remember all of it.
The bad
paint is old, used cheap one stage and now the clear is faded and after two yrs of weather just needs to be repainted.
front struts i think are bad
exhaust hanger needs to be welded back on
needs rear camber kit
Other then that and some tlc the car does great. I built it 2 yrs ago and the only problem I had was starter. I dont wanna get rid of the car but need something bigger with one kid and working on another lol. Looking to get a crewcab or excursion and can do cash on my end.
NOT LOOKING FOR ANY HONDA'S RIGHT NOW OTHER THEN ELEMENTS AND EK 4 DOORS PLUS CASH. I LOVE HONDA'S JUST NEED A FAMILY RIDE. THANKS AGAIN!
Pictures:
Location: roanoke
Means of contact: text or call (540) 597 6377
Price: $6200 cash need gone
Description: I have a 95 inetgra gsr with a gsr motor bought two years ago from tigerjapanese.com. B16 cable tranny with the hasport conversion is in the car now cause the gsr hyrdo crapped out on me lol. The tranny is lsd and has a stage one exedy clutch. HASPORT mounts all the way around with dc header and 2 1/2 exhaust. The motor has a intake and throttle body and aem fuel rail with blox fuel gauge and fuel regulater. benen indus. strut tower bar full engine bay tuck and paint. Rebuilt calipers all the way around and kyb agx struts with shunk 2 coilovers. Type r valve cover. All molding was shaved off and car was repainted a bright white once the clip was done. Green rota gt3's for the wheels and crossed drilled rotors. Leather seats front and rear and batt in hatch area. front and rear camber kits as well. Wink mirror and hasport linkage with short shifter.
There is so much done to the car i cant remember all of it.
The bad
paint is old, used cheap one stage and now the clear is faded and after two yrs of weather just needs to be repainted.
front struts i think are bad
exhaust hanger needs to be welded back on
needs rear camber kit
Other then that and some tlc the car does great. I built it 2 yrs ago and the only problem I had was starter. I dont wanna get rid of the car but need something bigger with one kid and working on another lol. Looking to get a crewcab or excursion and can do cash on my end.
NOT LOOKING FOR ANY HONDA'S RIGHT NOW OTHER THEN ELEMENTS AND EK 4 DOORS PLUS CASH. I LOVE HONDA'S JUST NEED A FAMILY RIDE. THANKS AGAIN!
Pictures:
Last edited by korruptkrew; 12-18-2012 at 06:06 AM. Reason: price and trade info
01-28-2013, 03:53 PM
#5
Registered Member
Join Date: Sep 2008
Location: Roanoke
Posts: 949
Likes: 0
Received 0 Likes
on
0 Posts
Re: wire tucked jdm gsr integra
i got a nice low mileage dodge ram
https://www.vadriven.com/forums/dome...-miles-462458/
https://www.vadriven.com/forums/dome...-miles-462458/
Last edited by BenJaminM451; 01-28-2013 at 04:37 PM.
Thread
Thread Starter
Forum
Replies
Last Post
fast_ass_crx
Honda
37
07-05-2010 09:35 AM
fast_ass_crx
Honda
49
05-28-2010 05:57 AM