Turn key 800+whp True Street/Street Monster..Full-Race, T1, Exospeed, Precision, etc.
#1
Turn key 800+whp True Street/Street Monster..Full-Race, T1, Exospeed, Precision, etc.
Name: Dustin Brown
Location: Frederick, MD
Means of contact: PM
Price: $14,000..very fairly priced for a turn key 800+whp 9 second street car
We are putting our True Street/Street car up for sale to see what type of interest is acquired . No expense has been spared during this build, and I mean NO expense. Nothing but top of the line parts have been used in this build. The price will be listed below, and if you do not like it click the X in the right hand corner. I can promise you that it could not be duplicated for anything less than our asking price x’s two. The car is a true turn-key 800+whp monster. The car was purchased over a year and a half ago for people that remember from Rich Doty on VADriven. We lost the motor last season and rebuilt the entire car from the GROUND-UP. Rediculous amounts of time and money have been spent to get this car where it is at right now.
**Clean title is in-hand, ready to sign over**
***Will NOT part-out, so don’t waste your time***
Asking Price = $14,000..
Engine - 1997 B18C1 (Less than 100 miles on EVERYTHING) - Built & Tuned by Mike Sweeney
Block
* Golden Eagle sleeved
* O-Ringed
* 84mm JE 11:1 pistons
* Upgraded Tool Steel wrist pins (the big boys)
* Crower 4340 Steel Billet rods
* ARP 2000 3/8th’s rod bolts
* ARP Headstuds
* ACL Bearings
* Moroso Oil pan
Head
* FULL Supertech Head
* NRG Tech SFWD cams
*Cometic Head Gasket
Misc. Engine
* Full Race Intake manifold
* T-1 Race catch can
* Mishimoto Radiator w/fan
* Golden Eagle IM gasket
* AEM Cam gears
* Every gasket is BRAND NEW from Honda, along with Timing Belt and Water Pump
* ATI Race Damper (Brand New)
Turbo Setup (Less than 100 miles on EVERYTHING) - Fabrication done by Jeff @ CCT
* Full Race T4 Twinscroll manifold
* Full Race Dumptubes
* Precision Billet 6765 with H cover and 1.32 a/r divided Turbine housing
* 2 Tial 44mm MVR wastegates
* Tial 50mm BOV
* CCT Intercooler
* CCT Charge-piping
* CCT 3 to 4 inch Downpipe w/muffler
* ALL push-lock fittings
Fuel Setup
* FCS Fuel cell w/ sending unit
* Injector Dynamics 2000cc injectors
* 2 Bosch 044 Fuel pumps
* Aeromotive FPR w/ liquid filled gauge
* Golden Eagle PRO-Series fuel rail
* ALL NEW fuel lines (-8 to -10 feed, and -6 return. All braided SS lines)
Engine Management / Ignition Setup / Electronics - All wiring done by Jeff @ CCT
* AEM V2 Box
* AEM EPM
* AEM Coil-on-Plug
* AEM Twinfire box
* AEM 5 Bar Map Sensor
* AEM Wideband
* AEM Boost Solenoid
* ARC 8000-D Control Panel
Transmission
* Competition Clutch Twin Disc
* Quaife LSD
* Golden Eagle scatter shield
* Mobil-1 75-90 Gear oil
Suspension
* Ground Control coil-overs
* Ground Control 1000LB rear springs
* Lakewood G-Sport Traction bars
* Energy Suspension throughout the car
Interior
* 10 pt roll cage
* Window net
* GSR seats
* Grant steering wheel
* Carpeting from front seats - forward
Exterior
* OEM Formula one red
* Exospeed 3 piece front-end
* Carbon Fiber hood (will be brand-new)
Wheels
* XXR 15x8 +0 offset w/ BFG 225/50R15 Radials (Dyno & Street use)
* V2 Competition 13x8 - Front w/slicks
* V2 Competition 15x3.5 w/skinnies
More picture will be up as soon as I get a chance to upload..this is an old picture with the M&W setup
Location: Frederick, MD
Means of contact: PM
Price: $14,000..very fairly priced for a turn key 800+whp 9 second street car
We are putting our True Street/Street car up for sale to see what type of interest is acquired . No expense has been spared during this build, and I mean NO expense. Nothing but top of the line parts have been used in this build. The price will be listed below, and if you do not like it click the X in the right hand corner. I can promise you that it could not be duplicated for anything less than our asking price x’s two. The car is a true turn-key 800+whp monster. The car was purchased over a year and a half ago for people that remember from Rich Doty on VADriven. We lost the motor last season and rebuilt the entire car from the GROUND-UP. Rediculous amounts of time and money have been spent to get this car where it is at right now.
**Clean title is in-hand, ready to sign over**
***Will NOT part-out, so don’t waste your time***
Asking Price = $14,000..
Engine - 1997 B18C1 (Less than 100 miles on EVERYTHING) - Built & Tuned by Mike Sweeney
Block
* Golden Eagle sleeved
* O-Ringed
* 84mm JE 11:1 pistons
* Upgraded Tool Steel wrist pins (the big boys)
* Crower 4340 Steel Billet rods
* ARP 2000 3/8th’s rod bolts
* ARP Headstuds
* ACL Bearings
* Moroso Oil pan
Head
* FULL Supertech Head
* NRG Tech SFWD cams
*Cometic Head Gasket
Misc. Engine
* Full Race Intake manifold
* T-1 Race catch can
* Mishimoto Radiator w/fan
* Golden Eagle IM gasket
* AEM Cam gears
* Every gasket is BRAND NEW from Honda, along with Timing Belt and Water Pump
* ATI Race Damper (Brand New)
Turbo Setup (Less than 100 miles on EVERYTHING) - Fabrication done by Jeff @ CCT
* Full Race T4 Twinscroll manifold
* Full Race Dumptubes
* Precision Billet 6765 with H cover and 1.32 a/r divided Turbine housing
* 2 Tial 44mm MVR wastegates
* Tial 50mm BOV
* CCT Intercooler
* CCT Charge-piping
* CCT 3 to 4 inch Downpipe w/muffler
* ALL push-lock fittings
Fuel Setup
* FCS Fuel cell w/ sending unit
* Injector Dynamics 2000cc injectors
* 2 Bosch 044 Fuel pumps
* Aeromotive FPR w/ liquid filled gauge
* Golden Eagle PRO-Series fuel rail
* ALL NEW fuel lines (-8 to -10 feed, and -6 return. All braided SS lines)
Engine Management / Ignition Setup / Electronics - All wiring done by Jeff @ CCT
* AEM V2 Box
* AEM EPM
* AEM Coil-on-Plug
* AEM Twinfire box
* AEM 5 Bar Map Sensor
* AEM Wideband
* AEM Boost Solenoid
* ARC 8000-D Control Panel
Transmission
* Competition Clutch Twin Disc
* Quaife LSD
* Golden Eagle scatter shield
* Mobil-1 75-90 Gear oil
Suspension
* Ground Control coil-overs
* Ground Control 1000LB rear springs
* Lakewood G-Sport Traction bars
* Energy Suspension throughout the car
Interior
* 10 pt roll cage
* Window net
* GSR seats
* Grant steering wheel
* Carpeting from front seats - forward
Exterior
* OEM Formula one red
* Exospeed 3 piece front-end
* Carbon Fiber hood (will be brand-new)
Wheels
* XXR 15x8 +0 offset w/ BFG 225/50R15 Radials (Dyno & Street use)
* V2 Competition 13x8 - Front w/slicks
* V2 Competition 15x3.5 w/skinnies
More picture will be up as soon as I get a chance to upload..this is an old picture with the M&W setup
#3
#4
Re: Turn key 800+whp True Street/Street Monster..Full-Race, T1, Exospeed, Precision,
bump for a car that was in the right hands and an honest seller. this car is tits. sucks it has to go.
#5
#6
Re: Turn key 800+whp True Street/Street Monster..Full-Race, T1, Exospeed, Precision,
No expense spare? 20 bucks gets you an air filter. At least put an air filter on the turbo, holy shit. If you want a "street" car than protect the motor, please! Your valves are going to look like shit after a couple thousand miles with all the dirt and dust particles being sucked into the head and going through the combustion process. Not to mention the fins and seals on the turbo are going to be screwed up.
#7
Re: Turn key 800+whp True Street/Street Monster..Full-Race, T1, Exospeed, Precision,
probably doesn't get driven on the street that much if at all. street car meaning its legal for the class that is ran at the track. very clean setup and well put together. GLWS. damn good price
#8
Re: Turn key 800+whp True Street/Street Monster..Full-Race, T1, Exospeed, Precision,
No expense spare? 20 bucks gets you an air filter. At least put an air filter on the turbo, holy shit. If you want a "street" car than protect the motor, please! Your valves are going to look like shit after a couple thousand miles with all the dirt and dust particles being sucked into the head and going through the combustion process. Not to mention the fins and seals on the turbo are going to be screwed up.
#9
Re: Turn key 800+whp True Street/Street Monster..Full-Race, T1, Exospeed, Precision,
#10
Re: Turn key 800+whp True Street/Street Monster..Full-Race, T1, Exospeed, Precision,
Nice setup but whats the make and model I think i missed it in all the oooo and aaahhhh's LOL