Sleeper Em1 with built b18c5
04-02-2012, 02:19 PM
#1
Honda4Life
Thread Starter
Join Date: Oct 2011
Location: Norfolk
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
Sleeper Em1 with built b18c5
Name: Eddie
Location: Norfolk
Means of contact: cell
Price: $12000
Description: I recently bought the engine from a guy off VAdriven with 10k on it. I added a few things to the engine before it was installed to make it a little stronger. The chasis has 140k and will go up since this car is a daily driver. Suspension is stock. I am not in a rush to get rid of the car so no low ball offers. The mods are listed below but there is alot so i may have missed something. The body is all stock and the interior is flawless. No rips or stains at all! This car still has everything working perfectly ie power steering, a/c, and cruise control. The car was tuned and installed by Shawn Ramey at Ramey built in VA Beach and it ran 225hp with 148tq on 93 octane with ac and power steering. If you are interested shoot me a text 3074212730 or email me at hondalvr269@yahoo.com.
Head work:
milled 40 thousands
cometic head gasket
full race port and polish
ferra 500 series valves
supertech valve train
Toda spec C cams
Aem tru time cam gears
Tranny
ITR 4.7 fd (shifts great no grinds)
Block
Benson sleeved b18c5
84.5 bore
Toda 12:1 pistons
ACL bearings
ARP bolts on everything
ITR crank
ITR rods
Bolt ons
70mm JG throttle boddy port matched
Shaved and polished Victory X intake manifold-also port matched
750cc injector dynamics injectors
AEM fuel rail
Vibrant headers
Apexi N1 catback
Skunk2 blue shaved valve cover kit
Pictures: [ATTACH=CONFIG]140596[/ATTACH][ATTACH=CONFIG]140597[/ATTACH][ATTACH=CONFIG]140598[/ATTACH][ATTACH=CONFIG]140599[/ATTACH][ATTACH=CONFIG]140600[/ATTACH][ATTACH=CONFIG]140601[/ATTACH][ATTACH=CONFIG]140602[/ATTACH]
Location: Norfolk
Means of contact: cell
Price: $12000
Description: I recently bought the engine from a guy off VAdriven with 10k on it. I added a few things to the engine before it was installed to make it a little stronger. The chasis has 140k and will go up since this car is a daily driver. Suspension is stock. I am not in a rush to get rid of the car so no low ball offers. The mods are listed below but there is alot so i may have missed something. The body is all stock and the interior is flawless. No rips or stains at all! This car still has everything working perfectly ie power steering, a/c, and cruise control. The car was tuned and installed by Shawn Ramey at Ramey built in VA Beach and it ran 225hp with 148tq on 93 octane with ac and power steering. If you are interested shoot me a text 3074212730 or email me at hondalvr269@yahoo.com.
Head work:
milled 40 thousands
cometic head gasket
full race port and polish
ferra 500 series valves
supertech valve train
Toda spec C cams
Aem tru time cam gears
Tranny
ITR 4.7 fd (shifts great no grinds)
Block
Benson sleeved b18c5
84.5 bore
Toda 12:1 pistons
ACL bearings
ARP bolts on everything
ITR crank
ITR rods
Bolt ons
70mm JG throttle boddy port matched
Shaved and polished Victory X intake manifold-also port matched
750cc injector dynamics injectors
AEM fuel rail
Vibrant headers
Apexi N1 catback
Skunk2 blue shaved valve cover kit
Pictures: [ATTACH=CONFIG]140596[/ATTACH][ATTACH=CONFIG]140597[/ATTACH][ATTACH=CONFIG]140598[/ATTACH][ATTACH=CONFIG]140599[/ATTACH][ATTACH=CONFIG]140600[/ATTACH][ATTACH=CONFIG]140601[/ATTACH][ATTACH=CONFIG]140602[/ATTACH]
Re: Sleeper Em1 with built b18c5
Thread
Thread Starter
Forum
Replies
Last Post
watisjdm
Engine / Exhaust / Drivetrain
16
04-01-2012 09:35 AM