One of the Rawest/Cleanest Turbo DA's in the 757
Name: Mike
Location: Virginia Beach Means of contact: PM me or post here PM me on how you want the car, what you want with it and don't want we can do things individually $8,500 as it sits *PM ME OFFERS* There is well over 15k in this car as a whole and countless hours of work, however I know I will never get that back. I'd be willing to part out the ENGINE/TURBO setup as a WHOLE and NOTHING ELSE. DO NOT ASK ME FOR MY WHEELS, SUSPENSION OR ANYTHING ELSE. Trades: RWD cars plus cash, looking for mostly 240's/FC's/ETC I want to get back into drifting. Description: 1990 Acura Integra Chassis Mileage 213k Engine Mileage-110 miles IF that Suspension mileage- Less than 1000 Backstory; I bought this car as a "beater". It was completely stock when I got it, with the exception of a new paint job (a higher quality one from Maaco $1600.00) and the paint actually looks decent. It had a stock LS engine and transmission in it, which are now gone. I have a problem where I can't keep anything stock, long story short. I proceeded to fully build this car. My reason for selling is, some things came up mainly life changes. I had to sell one vehicle when I moved to my new place, I sold my drift car as I had more money in this and it wasn't finished. The car is raw, has so much potential to be featured on many sites, once finished could be in a mag too. Engine: B18C1 Crower Rods Endyn Rollerwave 9:1 pistons (New rings) AEBS Sleeves Bored to a 2.0L Golden Eagle 84MM headgasket ARP Headstuds, Main studs. Skunk2 Stage 3 Cams Crower Stainless valves +1mm Crower Valve Springs and Retainers Mild port and polish Skunk 2 Intake manifold Ported throttle body Fuel Injector Clinic 1050cc Injectors Walbro 255LPH Fuel pump new TOMEI Wideband (analog gauge) GReddy Boost Gauge HKS GT2835R turbocharger HKS 60MM Wastegate Apexi Electronic Boost controller (AVCR) HKS adjustable Cam gears New oil pump New Water pump New Timing Belt Hasport Mounts Neptune Demon Board (better than Hondata IMO) (Currently Running on NEPTUNE CHIPPED BASEMAP) Transmission: Hasport Cable to Hydro Conversion GSR Transmission with LS fifth Gear Comp Clutch Stage 3 sprung Factory flywheel Suspension: Extended top hats Function and Form full coilovers Skunk 2 Front and Rear Camber Kit Wheels/Tires: 16x8 +20 ESM 009R's Falken 512 205/40R16 Muteki blue lug nuts Extended Wheel Studs Exterior: Amber Corners Amber bumper lenses Half and half tails Rear wiper delete Rear antenna delete Carbon Fiber rear visor 8K Hid's OEM front lip (Have EK sides that can go with the car) Recent Paint (right front fender needs to be replaced though) Engine bay painted same color as my old diesel. Wire tucked engine bay The Bad: *Open Downpipe *Not Tuned yet (on basemap, new engine literally has maybe 110 miles on it IF that) *Right Fender needs to be replaced *Left Fender got damaged at the lower corner of it coming into my driveway *Windshield wiper motor isn't wired up-Can do prior to the sale *No A/C No P/S! *Speedometer does not work-Vehicle has Hydro Trans now, there is a conversion kit or I can explain what I was going to do. I have simply just run out of time. I don't have the "drive/desire" to finish this car anymore. If no one decides to purchase the car as it sits, I will part the engine/trans and turbo setup as a whole or accept trade offers on drift cars. Pictures: (I can take more detailed pictures upon request) (stock form) http://i220.photobucket.com/albums/d...15715264_n.jpg Build Process: http://i220.photobucket.com/albums/d...32061802_n.jpg http://i220.photobucket.com/albums/d...56433334_n.jpg http://i220.photobucket.com/albums/d...nstan/teg4.jpg http://i220.photobucket.com/albums/d...n/d872a8ce.jpg http://i220.photobucket.com/albums/d...n/18fdfd42.jpg http://i220.photobucket.com/albums/d...n/3f857869.jpg http://i220.photobucket.com/albums/d...n/1c990e10.jpg http://i220.photobucket.com/albums/d...n/362ab69c.jpg http://i220.photobucket.com/albums/d...n/34ef3e2e.jpg http://i220.photobucket.com/albums/d...n/0907aaa1.jpg http://i220.photobucket.com/albums/d...n/cddf973a.jpg http://i220.photobucket.com/albums/d...n/235b64c2.jpg http://i220.photobucket.com/albums/d...n/2e78a31c.jpg http://i220.photobucket.com/albums/d...n/409087af.jpg http://i220.photobucket.com/albums/d...n/5c4c7d05.jpg http://i220.photobucket.com/albums/d...n/a056b9b5.jpg http://i220.photobucket.com/albums/d...n/c5eb2f98.jpg http://i220.photobucket.com/albums/d...n/5f96ed34.jpg http://i220.photobucket.com/albums/d...nstan/demo.jpg http://i220.photobucket.com/albums/d...anstan/int.jpg http://i220.photobucket.com/albums/d...11372820_n.jpg http://i220.photobucket.com/albums/d...nstan/teg3.jpg http://i220.photobucket.com/albums/d...nstan/teg2.jpg http://i220.photobucket.com/albums/d...nstan/teg1.jpg Most Recent: http://i220.photobucket.com/albums/d...10409337_n.jpg http://i220.photobucket.com/albums/d...16579772_n.jpg |
Re: One of the Rawest/Cleanest Turbo DA's in the 757
Clean Af! Nice build.
|
Re: One of the Rawest/Cleanest Turbo DA's in the 757
Thank you.
|
Re: One of the Rawest/Cleanest Turbo DA's in the 757
Definitely a Clean DA. Good job on the build. GLWS
|
Re: One of the Rawest/Cleanest Turbo DA's in the 757
Wow i was expecting to come into this thread and enjoy a few good laughs at the band wagon hondur faggotry.
But i was wrong. This is very well done. Up for you i hope you get close to your asking price. |
Re: One of the Rawest/Cleanest Turbo DA's in the 757
I appreciate the kind words, everyone :thup: .
|
Re: One of the Rawest/Cleanest Turbo DA's in the 757
simply beautiful
|
Re: One of the Rawest/Cleanest Turbo DA's in the 757
Boo!!!!!! You were suppose to make the sickest DA on the east coast with my motor/turbo set up, but I know how it is I didn't finish my build. Lol GL with sale. Rich/Rean tomei gauge is made jdm I hand delivered that Japan when I got it. Lol
|
Re: One of the Rawest/Cleanest Turbo DA's in the 757
Originally Posted by Ultra Rover
(Post 7981920)
Boo!!!!!! You were suppose to make the sickest DA on the east coast with my motor/turbo set up, but I know how it is I didn't finish my build. Lol GL with sale. Rich/Rean tomei gauge is made jdm I hand delivered that Japan when I got it. Lol
|
Re: One of the Rawest/Cleanest Turbo DA's in the 757
If you end up parting out, how much would you be looking for the turbo setup you got?
One nice car man. You should keep it and finish it. You'd get more of your moneys worth out of it. |
All times are GMT -8. The time now is 03:47 PM. |
© 2024 MH Sub I, LLC dba Internet Brands