need a civic shell
#1
Registered member
Thread Starter
Join Date: Jun 2008
Location: portsmouth
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
need a civic shell
like the title says im looking for a civic shell eg or ek coupe or hatch might consider 4 doors,rolling shell with interior is a plus,.i prefer something clean,and in the 757 area,a title is a must.looking to spend in the ball park of grand,more if its worth it.pm me with what yall got.
Last edited by terryd123; 11-10-2010 at 07:38 PM.
#3
Re: need a civic shell
...check out my 98 EK:
98 Civic Ex 2Dr Coupe (incomplete project)
98EK Coupe w/99-00 Si Front end conversion...Jdm power folding mirrors, Clear Si Headlights, Si Taillights, Chassis has been sanded & sprayed w/Dupont Self-etch primer. Front bumper, Fenders, Doors & Sideskirts have been professionally painted w/Dupont Chroma-base (jdm championship white) w/4 coats of clear. Over $500 invested in paint thus far (excluding labor). Car has been under roof (in my shop) since purchased!! Purchased from Supa Fly Fred., VA for $2K
Asking $2300 for everything...OBO!!
Chassis has no seats, carpet or panels inside, is full power w/sunroof. No hood or Trunk lid...Does have dash, Complete steering column w/ctr climate control panel. Red window tint!!
*Have Already SOLD: Red Leather S2000 Seats, Red JDM Carpet, Garret Turbo, K20A Camshafts, CTR Momo Steering Wheel, CTR Instrument Panel, 3" Thermal Cat-Back, Front Traction Bars!*
New 14" steelies on all 4's w/new Falkens (over $500 invested)
New wheel bearings on all 4's
Disc brake conversion on rear (94 GSR) (over $200)
New vented & cross-drilled rotors on all 4's (over $500 invested)
New EBC Pads (green stuff) on all 4's
Calipers Painted Red (VHT)
New Earls Steel Braided Lines ($180)
New CNC Machined Brake Booster Brace
Red Urethane bushings pressed in front control arms
New KYB Struts
New Adj. Ground Control Suspension
New Skunk 2 Front upper camber adj. (over $200)
New Suspension Technique Front Sway Bar
New Function 7 Lower Control Arms in Rear (over $200)
New Omni Power upper rear camber adj.
New CNC Alum. rear toe adj.
New RCI Fuel Cell + Orig. Fuel tank
Complete & Orig. OBD II Engine Harness
New Apexi Turbo Timer also for N/A (over $100)
New Oil catch can from RevTech (over $100)
Have a K24A2 bottom disassembled w/30k original miles on it from 02 CR-V (payed $600)
Have a K20 (base model) RSX bottom assembled w/pitts on top of #1 piston Have K20A3 head disassembled (no damage)
Also, have D16Z6 SOHC Vtec Engine w/disassembled bottom...#1 Piston Damage...Block Cylinders, Rods & Crank have No Damage.
http://www.myphotos.yahoo.com/s/20upxc9vbbg1mjujsvla
98 Civic Ex 2Dr Coupe (incomplete project)
98EK Coupe w/99-00 Si Front end conversion...Jdm power folding mirrors, Clear Si Headlights, Si Taillights, Chassis has been sanded & sprayed w/Dupont Self-etch primer. Front bumper, Fenders, Doors & Sideskirts have been professionally painted w/Dupont Chroma-base (jdm championship white) w/4 coats of clear. Over $500 invested in paint thus far (excluding labor). Car has been under roof (in my shop) since purchased!! Purchased from Supa Fly Fred., VA for $2K
Asking $2300 for everything...OBO!!
Chassis has no seats, carpet or panels inside, is full power w/sunroof. No hood or Trunk lid...Does have dash, Complete steering column w/ctr climate control panel. Red window tint!!
*Have Already SOLD: Red Leather S2000 Seats, Red JDM Carpet, Garret Turbo, K20A Camshafts, CTR Momo Steering Wheel, CTR Instrument Panel, 3" Thermal Cat-Back, Front Traction Bars!*
New 14" steelies on all 4's w/new Falkens (over $500 invested)
New wheel bearings on all 4's
Disc brake conversion on rear (94 GSR) (over $200)
New vented & cross-drilled rotors on all 4's (over $500 invested)
New EBC Pads (green stuff) on all 4's
Calipers Painted Red (VHT)
New Earls Steel Braided Lines ($180)
New CNC Machined Brake Booster Brace
Red Urethane bushings pressed in front control arms
New KYB Struts
New Adj. Ground Control Suspension
New Skunk 2 Front upper camber adj. (over $200)
New Suspension Technique Front Sway Bar
New Function 7 Lower Control Arms in Rear (over $200)
New Omni Power upper rear camber adj.
New CNC Alum. rear toe adj.
New RCI Fuel Cell + Orig. Fuel tank
Complete & Orig. OBD II Engine Harness
New Apexi Turbo Timer also for N/A (over $100)
New Oil catch can from RevTech (over $100)
Have a K24A2 bottom disassembled w/30k original miles on it from 02 CR-V (payed $600)
Have a K20 (base model) RSX bottom assembled w/pitts on top of #1 piston Have K20A3 head disassembled (no damage)
Also, have D16Z6 SOHC Vtec Engine w/disassembled bottom...#1 Piston Damage...Block Cylinders, Rods & Crank have No Damage.
http://www.myphotos.yahoo.com/s/20upxc9vbbg1mjujsvla
#5
Registered member
Thread Starter
Join Date: Jun 2008
Location: portsmouth
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
#7
Re: need a civic shell
#9
Re: need a civic shell
i got a 96 ex coupe shell with 99\00 front. si lip and si taillights. fresh champ white paint job. NO dents or scratches anywhere. full wiretuck. will do 1500 firm if u bring ur suspension and wheels pm me if interested
Thread
Thread Starter
Forum
Replies
Last Post