high compression 91 teg
#2
Registered member
Thread Starter
Join Date: Feb 2010
Posts: 702
Likes: 0
Received 0 Likes
on
0 Posts
Re: high compression 91 teg
NAME:andy
location:NOVA
contact:540.840.6131 or PM me
LOOKIN FOR TRADES ONLY!
hey i have a high compression built 91 acura integra GS. Car is a 5 speed.
-car is primed flat black
-cold air intake
-94 ls...b18b1(has under 60,000 on the new motor)
-new ngk spark plugs and wires
-car is fully converted from 0bd0 to 0bd1.
-built bottom end
- full exhaust. 4-1 DC headers through ebay exhaust
-sway bars and strut bar and a strut bar under the car
-no a/c or power steering
-gsr radiator
-high compression pistions
-aftermarket cams
-fully gutted.
-tint
-jdm driver seat with adjustable arm rest.
- 240xxx on body
-jdm rear wiper plug
-running on a jdm zc ecu
-sittin on sunflowers
-lowered on tokico springs
-tokico blues struts
-1 piece headlights
-hids
-fogs
-auto locks and windows.
-sun roof.
-NEW- driverside door locks now
-NEW-NEW clutch to be installed this weekend
NEEDS
-passenger side window is off rack
FEEL FREE TO TEXT ME ANYTIME!!
its a really qiuck car and gets good gas mileage. u can text me or pm me for more pics and info.
lokkin for a clean del sol si or a clean eg. lemme kno what u have....
CANT GET PICS TO UPLOAD...I WILL UPLOAD PICS TOMO.....TEXT ME FOR MORE PICS TOO
location:NOVA
contact:540.840.6131 or PM me
LOOKIN FOR TRADES ONLY!
hey i have a high compression built 91 acura integra GS. Car is a 5 speed.
-car is primed flat black
-cold air intake
-94 ls...b18b1(has under 60,000 on the new motor)
-new ngk spark plugs and wires
-car is fully converted from 0bd0 to 0bd1.
-built bottom end
- full exhaust. 4-1 DC headers through ebay exhaust
-sway bars and strut bar and a strut bar under the car
-no a/c or power steering
-gsr radiator
-high compression pistions
-aftermarket cams
-fully gutted.
-tint
-jdm driver seat with adjustable arm rest.
- 240xxx on body
-jdm rear wiper plug
-running on a jdm zc ecu
-sittin on sunflowers
-lowered on tokico springs
-tokico blues struts
-1 piece headlights
-hids
-fogs
-auto locks and windows.
-sun roof.
-NEW- driverside door locks now
-NEW-NEW clutch to be installed this weekend
NEEDS
-passenger side window is off rack
FEEL FREE TO TEXT ME ANYTIME!!
its a really qiuck car and gets good gas mileage. u can text me or pm me for more pics and info.
lokkin for a clean del sol si or a clean eg. lemme kno what u have....
CANT GET PICS TO UPLOAD...I WILL UPLOAD PICS TOMO.....TEXT ME FOR MORE PICS TOO
Last edited by oneCAMonly; 04-07-2010 at 10:58 AM. Reason: more fixes
#5
Registered member
Thread Starter
Join Date: Feb 2010
Posts: 702
Likes: 0
Received 0 Likes
on
0 Posts
Re: high compression 91 teg
haha i really coulnt tell u cuz i bought it and thats what dude told me. its my word vs his. but if u were to ride in the car or drive it u can feel that there is something done to it.
#8
Doing work mofo
Join Date: Jun 2007
Location: Richmond
Posts: 2,287
Likes: 0
Received 0 Likes
on
0 Posts
Re: high compression 91 teg
Has the ecu been chipped?
Tuned?
Im just saying if your stating that the car has a built bottom end and cams, then it wouldnt run to well on a stock ecu. Or atleast not to its full potential. You should pull that head off and oil pan to see whats been done to the inside of that block. Only take ya a few hours. XD
Tuned?
Im just saying if your stating that the car has a built bottom end and cams, then it wouldnt run to well on a stock ecu. Or atleast not to its full potential. You should pull that head off and oil pan to see whats been done to the inside of that block. Only take ya a few hours. XD
#9
Registered member
Thread Starter
Join Date: Feb 2010
Posts: 702
Likes: 0
Received 0 Likes
on
0 Posts
Re: high compression 91 teg
no its on a jdm zc automatic ecu ecu. has like no redline limit. i can take it up to 8. and it runs fine. and i kno its not runnin to its full potential cuz its not on the right ecu. i kno just been all rainy and dont have the right tools. lol but yea ill look into it tho