crx track car NEED TO SELL 2k obo
03-01-2012, 01:51 PM
#1
Registered Member
Thread Starter
Join Date: Sep 2006
Location: Lynchburg
Posts: 294
Likes: 0
Received 0 Likes
on
0 Posts
crx track car NEED TO SELL 2k obo
Name: Justin
Location: Hurt VA (20 mins south of Lynchburg)
Means of contact: pm
Price: $2000 obo NEED TO SELL
Description: Well its time to say goodbye to my baby, Ive had her for almost 4 years. Ive put a ton of work in her and shes came a LONG way. I dont want to sell the car, but Ive gotten in a tight spot. She runs, but hesitates to open up all the way, still quick for what it is. VERY FUN TO DRIVE WITH THE SUSPENSION SET UP!! So heres all the info on the car and hope you enjoy...
Open to some trades, hondas, 240's, jeeps, 4x4s, quads, motorcycles. Never know, worst I can say is no thanks.
1985 Crx
75,xxx miles on chassis
WEBER carb
rebuilt engine
-new water pump
-new valves
-new gaskets all around
-new plugs and wires
-new timing belt
-shaved head
-new intake manifold
87 si tranny with stage 3 clutch
new radiator
new alternator
new battery
new msd and msd coil
new pads and rotors (have new shoes, but doesnt need them yet)
GSR wheels with good tread
header - 2.5" exhaust - new flowmaster high flow muffler
custom track suspension (adjustable camber kit)
Momo steering wheel
sparco 3 point racing harness'
new racing seats
engine bay painted black
kill switch under steering column
SI spoiler
New windshield
key for ignition works on doors and hatch
I also have an extra head, intake manifold, TONS of brand new HONDA parts never opened. I'm not even sure what a lot of them go to, but I have a lot of brake pads, and bushings. I have the gauges that was in the car when I got it too, just dont have them installed. I also have a D16A1 fuel injected motor from an 88 integra and all the swap stuff in storage. The integra shell will come with the car if wanted, it is very rough though, good for parts.
The car is a registered SCCA race car, I have 2 log books to prove it.
The car was raced in CA in the late 80's and early 90's. I have pics of it on the track.
I have a bigger cam (not installed), I dont know the specs for it, I took it out cause it was getting too much cam for the stock carb at the time
This car is extremely loud!!!
I have a cd player and kenwood speakers that come with it
The bad
needs:
passenger door panel to be installed (have to cut a little bit off for door lock, its from an 87 si)
the rest of the trim put on and a paint job
a cat and flex pipe
carb to be adjusted right
a corner light (know someone who has one) (the signal light is on my truck, i will put it back on)
a gas tank or fuel cell (its rusting a bit, I just change the filter every now and then)
Pictures:
Location: Hurt VA (20 mins south of Lynchburg)
Means of contact: pm
Price: $2000 obo NEED TO SELL
Description: Well its time to say goodbye to my baby, Ive had her for almost 4 years. Ive put a ton of work in her and shes came a LONG way. I dont want to sell the car, but Ive gotten in a tight spot. She runs, but hesitates to open up all the way, still quick for what it is. VERY FUN TO DRIVE WITH THE SUSPENSION SET UP!! So heres all the info on the car and hope you enjoy...
Open to some trades, hondas, 240's, jeeps, 4x4s, quads, motorcycles. Never know, worst I can say is no thanks.
1985 Crx
75,xxx miles on chassis
WEBER carb
rebuilt engine
-new water pump
-new valves
-new gaskets all around
-new plugs and wires
-new timing belt
-shaved head
-new intake manifold
87 si tranny with stage 3 clutch
new radiator
new alternator
new battery
new msd and msd coil
new pads and rotors (have new shoes, but doesnt need them yet)
GSR wheels with good tread
header - 2.5" exhaust - new flowmaster high flow muffler
custom track suspension (adjustable camber kit)
Momo steering wheel
sparco 3 point racing harness'
new racing seats
engine bay painted black
kill switch under steering column
SI spoiler
New windshield
key for ignition works on doors and hatch
I also have an extra head, intake manifold, TONS of brand new HONDA parts never opened. I'm not even sure what a lot of them go to, but I have a lot of brake pads, and bushings. I have the gauges that was in the car when I got it too, just dont have them installed. I also have a D16A1 fuel injected motor from an 88 integra and all the swap stuff in storage. The integra shell will come with the car if wanted, it is very rough though, good for parts.
The car is a registered SCCA race car, I have 2 log books to prove it.
The car was raced in CA in the late 80's and early 90's. I have pics of it on the track.
I have a bigger cam (not installed), I dont know the specs for it, I took it out cause it was getting too much cam for the stock carb at the time
This car is extremely loud!!!
I have a cd player and kenwood speakers that come with it
The bad
needs:
passenger door panel to be installed (have to cut a little bit off for door lock, its from an 87 si)
the rest of the trim put on and a paint job
a cat and flex pipe
carb to be adjusted right
a corner light (know someone who has one) (the signal light is on my truck, i will put it back on)
a gas tank or fuel cell (its rusting a bit, I just change the filter every now and then)
Pictures:
