VADriven.com Forums

VADriven.com Forums (https://www.vadriven.com/forums/)
-   Honda (https://www.vadriven.com/forums/honda-101/)
-   -   99 Civic Si, clean title, real EM1, does not currently run (https://www.vadriven.com/forums/honda-101/99-civic-si-clean-title-real-em1-does-not-currently-run-478589/)

jdmjunky 11-10-2013 10:51 AM

99 Civic Si, clean title, real EM1, does not currently run
 
8 Attachment(s)
***SOLD***

Description:
Hate to sell my car but I need to to pay off some fines and bills. I've got a 99 Honda Civic Si with an LS/Vtec swap up for sale. This car has a clean and clear title and has never been in an accident. Car currently DOES NOT RUN, cranks but won't start. Think it may be a fuel issue but not sure. 210k miles on the chassis, only about 60k miles on rebuilt swap. Engine does not leak or burn any oil at all. Have changed the oil every 3k miles with mobil full synthetic 5w20

Engine:
B18A1 block
GSR P30 pistons
98 GSR head
Full Ferrea Valvetrain (valves/springs/retainers) have receipt
AEM cam gears
GSR hydro transmission, shifts great
NEW TPS
NEW MAP sensor
NEW spark plugs and wires
NEW valve cover gasket
OEM head gasket and valve seals replaced last summer (have receipt)
4-1 header
short ram intake
Currently has a stock P2T (Si) ecu and could use a tune

Exterior:
Painted pearl white (paint is about 1.5yrs old)
Mugen rep front lip
8k HIDs
15x7 polished slips, tires have about 70% tread

Interior:
GSR cloth front seats *excellent condition*
Si rear seats
black suede headliner (done about a month ago)
black suede armrest (done about a month ago)
PWJDM shift boot
Skunk2 weighted shift knob
JVC cd player with remote
Kenwood door speakers

Suspension:
KYB AGX 8way adjustables
Tokico Springs
OEM Si strut bar
Blox LCAs gold
Benen Industries tie bar

Bad:
No A/C or P/S, however I do have most of the components to put it back in, believe all you would need to finish it is get AC lines and belts to have everything (No idea why the AC or PS were deleted, got it like that and just never got around to putting it all back together)

Gas gauge on cluster does not work (everything else on cluster does work)

Front bumper needs paint

Pictures:
[ATTACH=CONFIG]173359[/ATTACH][ATTACH=CONFIG]173360[/ATTACH][ATTACH=CONFIG]173361[/ATTACH][ATTACH=CONFIG]173362[/ATTACH][ATTACH=CONFIG]173363[/ATTACH][ATTACH=CONFIG]173364[/ATTACH][ATTACH=CONFIG]173365[/ATTACH][ATTACH=CONFIG]173366[/ATTACH]

PicovAndropov 11-10-2013 12:07 PM

Re: 99 Civic Si, clean title, real EM1, does not currently run
 
Fixed the pictures for you.


jdmjunky 11-10-2013 01:22 PM

Re: 99 Civic Si, clean title, real EM1, does not currently run
 
Thanks, fixed

boredom 11-10-2013 01:31 PM

Re: 99 Civic Si, clean title, real EM1, does not currently run
 
Spoiler
 
so...nothing that makes this an em1 is still there other than the vin, it doesnt run, yet you still want 3 grand?

jdmjunky 11-10-2013 02:19 PM

Re: 99 Civic Si, clean title, real EM1, does not currently run
 
The only thing that's not on here that would make it an Si are the badges and stickers, other than that everything is still there. Oh and it says BEST OFFER

PicovAndropov 11-10-2013 02:28 PM

Re: 99 Civic Si, clean title, real EM1, does not currently run
 
Original b16a2 is out of the car brobro.

It'savtech 11-10-2013 03:02 PM

Re: 99 Civic Si, clean title, real EM1, does not currently run
 
sounds like rod bearings same thing happened to me would crank all day wouldnt turn over could be wrong though GLWS

jdmjunky 11-10-2013 03:51 PM

Re: 99 Civic Si, clean title, real EM1, does not currently run
 

Originally Posted by PicovAndropov (Post 8229799)
Original b16a2 is out of the car brobro.

Ok my bad that's the only other thing. Thought that was obvious enough, guess not.

PicovAndropov 11-10-2013 05:02 PM

Re: 99 Civic Si, clean title, real EM1, does not currently run
 

Originally Posted by It'savtech (Post 8229809)
sounds like rod bearings same thing happened to me would crank all day wouldnt turn over could be wrong though GLWS

Never seen rod bearings be the cause of crank no start. You need 3 things to start a car: fuel, ignition and timing.

jdmjunky 11-10-2013 07:40 PM

Re: 99 Civic Si, clean title, real EM1, does not currently run
 

Originally Posted by PicovAndropov (Post 8229862)
Never seen rod bearings be the cause of crank no start. You need 3 things to start a car: fuel, ignition and timing.

This man is correct. Which is why I know it's a fuel issue because ignition and timing are fine


All times are GMT -8. The time now is 11:04 AM.


© 2024 MH Sub I, LLC dba Internet Brands