98 Roma Red Hatchback Project Car GSR setup for turbo
02-20-2013, 08:48 AM
#1
Registered Member
Thread Starter
Join Date: Feb 2011
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
98 Roma Red Hatchback Project Car GSR setup for turbo
Price: SOLD
1998 honda civic cx hatchback
Engine:
B17 gsr block (stock block, everything has been gone over and retorqued)
B18 gsr head
Ferrea valve springs
Ferrea retainers
Ferrea valve seals
Skunk 2 Pro1 cams
Buddy Club cam gears
STR intake manifold
Hondata intake manifold gasket
OBX 70mm Throttle body
Skunk 2 Composite fuel rail
510cc injectors
OBX top mount manifold with 3" custom made down Pipe heat wrapped
steel braided fuel line
steel braided oil lines for turbo feed and return
new timing belt, headgasket, valve cover gasket
ARP headstuds
Walbro 255 pump
Stage 5 clutch
GSR tranny
Mishimoto radiator and fan
New OEM axles
Catch Can setup on rear block plugs only
new plugs/wires/distributor cap
4 bar map sensor
Suspension/Brakes:
Skunk 2 Pro series Adjustable coilovers
Skunk 2 Pro Camber kit in front
All new ball joints
New Inner and Outer tie rods
Rear disc conversion
All new Rotors and Akimbo Brake pads all around
Blox lower control arms
ECU:
New Black Edition p72 ecu (i think)
Neptune Demon RTP with data cable. I will give you the software key with purchase
There is more that i cant remember now, will add when it comes to mind
Car will not come with turbo,wastegate,bov,boost controller,turbo timer, or seats!!
will give you the intercooler pipes i have and intercooler
Body is in fairly good shape, no major dents or dings, driver side door is silver and missing door panel. body is all stock except for carbon fiber duck bill
I will leave turbo and everything else on so you can hear engine run first, then pull it
Pictures:
1998 honda civic cx hatchback
Engine:
B17 gsr block (stock block, everything has been gone over and retorqued)
B18 gsr head
Ferrea valve springs
Ferrea retainers
Ferrea valve seals
Skunk 2 Pro1 cams
Buddy Club cam gears
STR intake manifold
Hondata intake manifold gasket
OBX 70mm Throttle body
Skunk 2 Composite fuel rail
510cc injectors
OBX top mount manifold with 3" custom made down Pipe heat wrapped
steel braided fuel line
steel braided oil lines for turbo feed and return
new timing belt, headgasket, valve cover gasket
ARP headstuds
Walbro 255 pump
Stage 5 clutch
GSR tranny
Mishimoto radiator and fan
New OEM axles
Catch Can setup on rear block plugs only
new plugs/wires/distributor cap
4 bar map sensor
Suspension/Brakes:
Skunk 2 Pro series Adjustable coilovers
Skunk 2 Pro Camber kit in front
All new ball joints
New Inner and Outer tie rods
Rear disc conversion
All new Rotors and Akimbo Brake pads all around
Blox lower control arms
ECU:
New Black Edition p72 ecu (i think)
Neptune Demon RTP with data cable. I will give you the software key with purchase
There is more that i cant remember now, will add when it comes to mind
Car will not come with turbo,wastegate,bov,boost controller,turbo timer, or seats!!
will give you the intercooler pipes i have and intercooler
Body is in fairly good shape, no major dents or dings, driver side door is silver and missing door panel. body is all stock except for carbon fiber duck bill
I will leave turbo and everything else on so you can hear engine run first, then pull it
Pictures:
Last edited by wanta240; 03-14-2013 at 10:33 PM.
