98 Civic Ex 2Dr Coupe (incomplete project)
#1
98 Civic Ex 2Dr Coupe (incomplete project)
98EK Coupe w/99-00 Si Front end conversion...Jdm power folding mirrors, Clear Si Headlights, Si Taillights, Chassis has been sanded & sprayed w/Dupont Self-etch primer. Front bumper, Fenders, Doors & Sideskirts have been professionally painted w/Dupont Chroma-base (jdm championship white) w/4 coats of clear. Over $500 invested in paint thus far (excluding labor). Car has been under roof (in my shop) since purchased!! Purchased from Supa Fly Fred., VA for $2K
Asking $2300 for everything...OBO!!
Chassis has no seats, carpet or panels inside, is full power w/sunroof. No hood or Trunk lid...Does have dash, Complete steering column w/ctr climate control panel. Red window tint!!
*Have Already SOLD: Red Leather S2000 Seats, Red JDM Carpet, Garret Turbo, K20A Camshafts, CTR Momo Steering Wheel, CTR Instrument Panel, 3" Thermal Cat-Back, Front Traction Bars!*
New 14" steelies on all 4's w/new Falkens (over $500 invested)
New wheel bearings on all 4's
Disc brake conversion on rear (94 GSR) (over $200)
New vented & cross-drilled rotors on all 4's (over $500 invested)
New EBC Pads (green stuff) on all 4's
Calipers Painted Red (VHT)
New Earls Steel Braided Lines ($180)
New CNC Machined Brake Booster Brace
Red Urethane bushings pressed in front control arms
New KYB Struts
New Adj. Ground Control Suspension
New Skunk 2 Front upper camber adj. (over $200)
New Suspension Technique Front Sway Bar
New Function 7 Lower Control Arms in Rear (over $200)
New Omni Power upper rear camber adj.
New CNC Alum. rear toe adj.
New RCI Fuel Cell + Orig. Fuel tank
Complete & Orig. OBD II Engine Harness
New Apexi Turbo Timer also for N/A (over $100)
New Oil catch can from RevTech (over $100)
Have a K24A2 bottom disassembled w/30k original miles on it from 02 CR-V (payed $600)
Have a K20 (base model) RSX bottom assembled w/pitts on top of #1 piston Have K20A3 head disassembled (no damage)
Also, have D16Z6 SOHC Vtec Engine w/disassembled bottom...#1 Piston Damage...Block Cylinders, Rods & Crank have No Damage.
http://www.myphotos.yahoo.com/s/20upxc9vbbg1mjujsvla
Asking $2300 for everything...OBO!!
Chassis has no seats, carpet or panels inside, is full power w/sunroof. No hood or Trunk lid...Does have dash, Complete steering column w/ctr climate control panel. Red window tint!!
*Have Already SOLD: Red Leather S2000 Seats, Red JDM Carpet, Garret Turbo, K20A Camshafts, CTR Momo Steering Wheel, CTR Instrument Panel, 3" Thermal Cat-Back, Front Traction Bars!*
New 14" steelies on all 4's w/new Falkens (over $500 invested)
New wheel bearings on all 4's
Disc brake conversion on rear (94 GSR) (over $200)
New vented & cross-drilled rotors on all 4's (over $500 invested)
New EBC Pads (green stuff) on all 4's
Calipers Painted Red (VHT)
New Earls Steel Braided Lines ($180)
New CNC Machined Brake Booster Brace
Red Urethane bushings pressed in front control arms
New KYB Struts
New Adj. Ground Control Suspension
New Skunk 2 Front upper camber adj. (over $200)
New Suspension Technique Front Sway Bar
New Function 7 Lower Control Arms in Rear (over $200)
New Omni Power upper rear camber adj.
New CNC Alum. rear toe adj.
New RCI Fuel Cell + Orig. Fuel tank
Complete & Orig. OBD II Engine Harness
New Apexi Turbo Timer also for N/A (over $100)
New Oil catch can from RevTech (over $100)
Have a K24A2 bottom disassembled w/30k original miles on it from 02 CR-V (payed $600)
Have a K20 (base model) RSX bottom assembled w/pitts on top of #1 piston Have K20A3 head disassembled (no damage)
Also, have D16Z6 SOHC Vtec Engine w/disassembled bottom...#1 Piston Damage...Block Cylinders, Rods & Crank have No Damage.
http://www.myphotos.yahoo.com/s/20upxc9vbbg1mjujsvla
#2
Registered member
Join Date: Aug 2009
Location: Stafford
Posts: 519
Likes: 0
Received 0 Likes
on
0 Posts
Re: 98 Civic Ex 2Dr Coupe (incomplete project)
Bump for a no bullshit thread. And cheap. I seen in person everything is super clean. If youndont belive me check it out urself!!!
#3
Registered member
Join Date: Aug 2009
Location: Stafford
Posts: 519
Likes: 0
Received 0 Likes
on
0 Posts
Re: 98 Civic Ex 2Dr Coupe (incomplete project)
Bump for a friend
#4
Re: 98 Civic Ex 2Dr Coupe (incomplete project)
would have been a clean car to bad didn't have the time to complete it will be a good project for someone
#5
Registered member
Join Date: Aug 2009
Location: Stafford
Posts: 519
Likes: 0
Received 0 Likes
on
0 Posts
Re: 98 Civic Ex 2Dr Coupe (incomplete project)
Car never touched the road lol!!! Someone needs to get this it's worth way more then 2.3 k
#6
Registered member
Join Date: Aug 2009
Location: Stafford
Posts: 519
Likes: 0
Received 0 Likes
on
0 Posts
Re: 98 Civic Ex 2Dr Coupe (incomplete project)
Bump No ones grabbing on this ????
#7
Registered member
Join Date: Aug 2009
Location: Stafford
Posts: 519
Likes: 0
Received 0 Likes
on
0 Posts
Re: 98 Civic Ex 2Dr Coupe (incomplete project)
Bump for G
#8
Re: 98 Civic Ex 2Dr Coupe (incomplete project)
98EK Coupe w/99-00 Si Front end conversion...
Jdm power folding mirrors,
Clear Si Headlights
Disc brake conversion on rear (94 GSR)
New vented & cross-drilled rotors on all 4's
New EBC Pads (green stuff) on all 4's
Calipers Painted Red (VHT)
New Earls Steel Braided Lines
New CNC Machined Brake Booster Brace
Red Urethane bushings pressed in front control arms
New KYB Struts
New Adj. Ground Control Suspension
New Skunk 2 Front upper camber adj.
New Suspension Technique Front Sway Bar
New Function 7 Lower Control Arms in Rear
New Omni Power upper rear camber adj.
New CNC Alum. rear toe adj.
Have a K20 (base model) RSX bottom assembled w/pitts on top of #1 piston
http://www.myphotos.yahoo.com/s/20upxc9vbbg1mjujsvla
Jdm power folding mirrors,
Clear Si Headlights
Disc brake conversion on rear (94 GSR)
New vented & cross-drilled rotors on all 4's
New EBC Pads (green stuff) on all 4's
Calipers Painted Red (VHT)
New Earls Steel Braided Lines
New CNC Machined Brake Booster Brace
Red Urethane bushings pressed in front control arms
New KYB Struts
New Adj. Ground Control Suspension
New Skunk 2 Front upper camber adj.
New Suspension Technique Front Sway Bar
New Function 7 Lower Control Arms in Rear
New Omni Power upper rear camber adj.
New CNC Alum. rear toe adj.
Have a K20 (base model) RSX bottom assembled w/pitts on top of #1 piston
http://www.myphotos.yahoo.com/s/20upxc9vbbg1mjujsvla
How bad is the piston pitted and would you sell just the pistons???
#9
ej_greer
Join Date: Nov 2009
Location: DMV, Orlando and ATL
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
Re: 98 Civic Ex 2Dr Coupe (incomplete project)
hes NOT parting out bro!!!! sorry
#10
Re: 98 Civic Ex 2Dr Coupe (incomplete project)
@ BlkiceX...piston is not devastated however, not recommended for use! May cause interference w/valves via high, burred spots. Valve dropped previously to cause damage.
Everything that is listed in the post is being sold as a package deal.
Thanks Bro
Everything that is listed in the post is being sold as a package deal.
Thanks Bro