VADriven.com Forums

VADriven.com Forums (https://www.vadriven.com/forums/)
-   Honda (https://www.vadriven.com/forums/honda-101/)
-   -   97 ek9 clone, rhd 5lug, k20, jrsc, tucked and shaved! (https://www.vadriven.com/forums/honda-101/97-ek9-clone-rhd-5lug-k20-jrsc-tucked-shaved-461022/)

Jdmhore 01-04-2013 05:01 PM

97 ek9 clone, rhd 5lug, k20, jrsc, tucked and shaved!
 
10 Attachment(s)
Mike
Stuarts Draft, va
540-241-5915
$21,000/obo

ALright before everyone makes smartass comments about the price listed above! This car has been completely stripped and rebuilt from the ground up. No short cuts taken!

1997 civic hatch

<<<<< interior and exterior >>>>>

full ek9 RHD clip
ek9 oem fenders
ek9 oem headlights with 6k hids
ek9 oem side markers
ek9 oem front bumper
ek9 oem hood
ek9 oem rear bumper
ek9 oem rear lower valance
ek9 oem front lower valance
ek9 oem side skirts
ek9 oem ctr wing
Alex wing brackets
ek9 door sills
ek9 red carpet
ek9 power doors
ek9 front recarro and rear seats
ek9 99-00 climate and dash
ek9 rhd latches and cable for gas door and trunk
ek9 cluster
ek9 kick panels with road flare
ek9 door panels (power)
ek rear hatch plastics
Personal steering wheel with hub and quick release and lock! also with funtioning horn button
innovate coolant temp guage
innovate wideband

<<<<Suspension>>>>>

jdm type r 36mm 5 lug conversion
steel braided lines
drilled rotors and brakes
extended studs
new wheel bearings
new ball joints
Godspeed full coilovers
skunk2 front and rear camber kits
function 7 rear subframe brace
function 7 lower control arms
beaks rear tie bar (neo-chrome) never installed

<<<<<engine bay>>>>>

2005 k20z1 complete swap with 43,000miles
Jackson Racing Supercharger with 2.6 pulley freshly rebuilt from magnuson superchargers
Kpro
6spd trans with added type r lsd diff
hybrid racing shift box
tein hood dampeners
Dress-up bolts NEO Chrome kit
hybrid racing shift cables
k-tuned upper coolant housing
k-tuned thermostat housing
ALL-In Fab tucked radiator w/ -16 coolant lines
k-tuned custom lenth clutch line
s2k cmc with adapter
full brake tuck (custom)
engine bay is shaved and tucked!
Wire-Worx custom k series RHD harness specifically designed for this car
milspec connector
Wire-Worx head light tuck harness designed specifically for this car
remote positive battery terminal
Snow performance water/meth kit

I am sure that there are alot of things that have been left out, if you have any questions feel free to ask, but keep all negaitve comments to yourself!




Pictures:

[ATTACH=CONFIG]158582[/ATTACH][ATTACH=CONFIG]158583[/ATTACH][ATTACH=CONFIG]158584[/ATTACH][ATTACH=CONFIG]158585[/ATTACH][ATTACH=CONFIG]158586[/ATTACH][ATTACH=CONFIG]158587[/ATTACH][ATTACH=CONFIG]158588[/ATTACH][ATTACH=CONFIG]158589[/ATTACH][ATTACH=CONFIG]158590[/ATTACH][ATTACH=CONFIG]158591[/ATTACH]

Jdmhore 01-04-2013 05:03 PM

Re: 97 ek9 clone, rhd 5lug, k20, jrsc, tucked and shaved!
 
7 Attachment(s)
[ATTACH=CONFIG]158592[/ATTACH][ATTACH=CONFIG]158593[/ATTACH][ATTACH=CONFIG]158594[/ATTACH][ATTACH=CONFIG]158595[/ATTACH][ATTACH=CONFIG]158596[/ATTACH][ATTACH=CONFIG]158597[/ATTACH][ATTACH=CONFIG]158598[/ATTACH]

87-CRX-SI 01-04-2013 08:13 PM

Re: 97 ek9 clone, rhd 5lug, k20, jrsc, tucked and shaved!
 
Bump for mike and this car I saw this car through all the steps and everything is legit about this car. I would keep it if I were you but glws man

ek9+ 01-04-2013 10:19 PM

Re: 97 ek9 clone, rhd 5lug, k20, jrsc, tucked and shaved!
 
A lot of money tied up in this thing. Buyer will not be disapointed. GLWS Mr.Carr

Jdmhore 01-05-2013 02:23 AM

Re: 97 ek9 clone, rhd 5lug, k20, jrsc, tucked and shaved!
 
thanks, im not really sure that i will let it go, but who knows!

eyeGOsloo 01-05-2013 06:55 AM

Re: 97 ek9 clone, rhd 5lug, k20, jrsc, tucked and shaved!
 
Sick! Nice build man. You know you don't want to let her go after all the hard work ;)

Jdmhore 01-05-2013 12:50 PM

Re: 97 ek9 clone, rhd 5lug, k20, jrsc, tucked and shaved!
 

Originally Posted by eyeGOsloo (Post 8034008)
Sick! Nice build man. You know you don't want to let her go after all the hard work ;)

more than likely i am gonna pull the swap build it within the next month or so!

2doorex 01-05-2013 05:00 PM

Re: 97 ek9 clone, rhd 5lug, k20, jrsc, tucked and shaved!
 
YAY!! That sounds like a good plan!!

Cheeks 01-05-2013 07:28 PM

Re: 97 ek9 clone, rhd 5lug, k20, jrsc, tucked and shaved!
 
Nice, GLWS

Jdmhore 01-06-2013 04:06 AM

Re: 97 ek9 clone, rhd 5lug, k20, jrsc, tucked and shaved!
 
morning bump


All times are GMT -8. The time now is 06:50 AM.


© 2024 MH Sub I, LLC dba Internet Brands