94' civic VX hatch Full Build TURBO
#1
Registered Member
Thread Starter
Join Date: Jun 2006
Posts: 587
Likes: 0
Received 0 Likes
on
0 Posts
94' civic VX hatch Full Build TURBO
___Reduced___
4900OBO ALSO CONSIDERING PARTING OUT NOW....
7574691522 OPEN TO TRADES FOR SUBARU WAGON WRX, Outback dont care...
Gregg
VABEACH
Well, I hate to do this but buyin a house is a bit more important than having a 3rd car/project sooo..
For sale is my 94 vx hatch. Exterior is a bit rough but was building this as a track car..some paint and should be good.
As the car sit's its a bare block and tranny in the car BUT. EVERYTHING you need to put this engine together and acheive high HP #'s is here. Items marked with * are new.
I put the msrp prices just to show its about $4100 in NEW engine parts alone.
This is a link to an almost identical set up making 463 HP and 352 ft/lbs
http://www.turbod16.com/viewtopic.ph...0&sk=t&sd=attp
Here's the list of the goodies:
1998 D16y8 motor/trans 88k mi
Eagle H-Beam rods*Rated to 900hp $419
CP 8:1 comp pistons and rings* $592
OEM rod bearings* $30
CompCams valve springs* $218
Cometic Head Gasket* $87
ARP head Studs* $120
Supertech blockguard* $97
Timing Belt* $25
Valve Seals* $59
DSM 440 CC injectors* $240
Fully ported and decked Cylinder Head-i paid 200 for head and around 300 for machining Has valves rockers etc...
308 Stainless "Twisted Ram" turbo manifold 42mm runners* $200(T3/T4)
OBX Aluminum Trumpeted Intake manifold* and gaskets* $150
ACT HC5-XTSS street/race clutch 2500 mi on clutch $429
ACT Prolite Xact 8.8 lbs flywheel 2500 mi $366
Garrett t3 super 60 Trim (60 hot, 48 or 52 cold) $600*
ebay intercooler and piping$220
MSD 6A Ignition(External and Dist. Coil)
Apex'i World sport II exhaust
Suspension:
Tein lowering springs
Tokico blue struts
Front and rear strut tower bar
Skunk2 lower arm bar
Interior:
Black Dash
Black GSR Leather interior front AND rear
Exterior:
Spoon Carbon fiber duckbill (needs to be re-cleared)
rear bumper diffuser
2 Black SI rims included
Like i said everything is here, sensors and alot of OEM parts
****ALSO, I have a one time 40% discount from Skunk2 for the whole purchase..I cant "transfer" it but i can make the purchase for you.
[ATTACH][/ATTACH]
4900OBO ALSO CONSIDERING PARTING OUT NOW....
7574691522 OPEN TO TRADES FOR SUBARU WAGON WRX, Outback dont care...
Gregg
VABEACH
Well, I hate to do this but buyin a house is a bit more important than having a 3rd car/project sooo..
For sale is my 94 vx hatch. Exterior is a bit rough but was building this as a track car..some paint and should be good.
As the car sit's its a bare block and tranny in the car BUT. EVERYTHING you need to put this engine together and acheive high HP #'s is here. Items marked with * are new.
I put the msrp prices just to show its about $4100 in NEW engine parts alone.
This is a link to an almost identical set up making 463 HP and 352 ft/lbs
http://www.turbod16.com/viewtopic.ph...0&sk=t&sd=attp
Here's the list of the goodies:
1998 D16y8 motor/trans 88k mi
Eagle H-Beam rods*Rated to 900hp $419
CP 8:1 comp pistons and rings* $592
OEM rod bearings* $30
CompCams valve springs* $218
Cometic Head Gasket* $87
ARP head Studs* $120
Supertech blockguard* $97
Timing Belt* $25
Valve Seals* $59
DSM 440 CC injectors* $240
Fully ported and decked Cylinder Head-i paid 200 for head and around 300 for machining Has valves rockers etc...
308 Stainless "Twisted Ram" turbo manifold 42mm runners* $200(T3/T4)
OBX Aluminum Trumpeted Intake manifold* and gaskets* $150
ACT HC5-XTSS street/race clutch 2500 mi on clutch $429
ACT Prolite Xact 8.8 lbs flywheel 2500 mi $366
Garrett t3 super 60 Trim (60 hot, 48 or 52 cold) $600*
ebay intercooler and piping$220
MSD 6A Ignition(External and Dist. Coil)
Apex'i World sport II exhaust
Suspension:
Tein lowering springs
Tokico blue struts
Front and rear strut tower bar
Skunk2 lower arm bar
Interior:
Black Dash
Black GSR Leather interior front AND rear
Exterior:
Spoon Carbon fiber duckbill (needs to be re-cleared)
rear bumper diffuser
2 Black SI rims included
Like i said everything is here, sensors and alot of OEM parts
****ALSO, I have a one time 40% discount from Skunk2 for the whole purchase..I cant "transfer" it but i can make the purchase for you.
[ATTACH][/ATTACH]
Last edited by eghatch27; 03-30-2010 at 09:02 AM.