92 eg hatch si clean on boost * skunk 2 bride momo turbonetics hks greddy blox xxr *
04-03-2012, 04:49 PM
#1
Registered Member
Thread Starter
Join Date: Jul 2010
Location: lynchburg
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
92 eg hatch si clean on boost * skunk 2 bride momo turbonetics hks greddy blox xxr *
Name: colton
Location: lynchburg va
Means of contact: pm or text 434-401-5903
Price: $4,500 cash price...trades considered
Description: under the hood
-d16y8(factory) 60k no smoke
-garrett turbo .60
-cast manifold
-turbonetics evolution wastegate
-custom dump tube and down pipe
-stainless braided oil feed and return lines
-godspeed intercooler
-hks blow off
-stage 2 clutch (clutchnet)
-skunk2 intake manifold
-rc440 injectors
-aem fuel rail
-blox fuel pressure guage
-thermal intake manifold gasket
-fasturbo vaccume block
-vented valve cover (shaved honda emblem)
-walbro 255 fuel pump
body has 250k, paint is black gray 3 years old but car sat in storage and paint never saw daylight so its fresh and still looks wet. engine bay, interior, jams, moldings, and lip were all painted to match.type r style front lip. fenders were cut and rolled for fitment of fiberglass fender flares. all emblems were shaved. clear title fresh inspection. alluminum hood risers (wastegate touched). no name rear tow hook and radiator with silicone hoses. full 3 inch meggan racing exaust (no cat) 15" xxr 002 zero offset wheels wrapped in new 195/45's also have a set of 205/50's. battery (optima yellowtop) relocated to rear with alluminum battery box. interior is gutted with new carpet in front section. i have itleast 90% of the factory interior, just not installed. i prefer the race car feel. no name short shifter and knob. bride seats with sparco belts. momo steering wheel. autometer oil and boost guages on pillar. riding on full skunk 2 race coilovers with high hats in rear blox upper control arms in front with camber adjustments and blox lca's in rear with blox camber kit as well. also have with the car but not installed is a set of 4 piston wilwood brake calipers with race pads and 11" rotors. greddy electronic boost controler with high and low boost, and a 3 bar map sensor, and a blox fuel pressure regulater.
car is on 5lbs wastegate, i have all springs and shims. as well as a factory p28 ecu and a chipped one.
i daily this car and it runs great and tons of fun to drive, hangs with the bikes in the mountain.
Pictures: [ATTACH=CONFIG]140663[/ATTACH][ATTACH=CONFIG]140665[/ATTACH][ATTACH=CONFIG]140666[/ATTACH][ATTACH=CONFIG]140667[/ATTACH][ATTACH=CONFIG]140668[/ATTACH][ATTACH=CONFIG]140669[/ATTACH][ATTACH=CONFIG]140670[/ATTACH][ATTACH=CONFIG]140671[/ATTACH]
Location: lynchburg va
Means of contact: pm or text 434-401-5903
Price: $4,500 cash price...trades considered
Description: under the hood
-d16y8(factory) 60k no smoke
-garrett turbo .60
-cast manifold
-turbonetics evolution wastegate
-custom dump tube and down pipe
-stainless braided oil feed and return lines
-godspeed intercooler
-hks blow off
-stage 2 clutch (clutchnet)
-skunk2 intake manifold
-rc440 injectors
-aem fuel rail
-blox fuel pressure guage
-thermal intake manifold gasket
-fasturbo vaccume block
-vented valve cover (shaved honda emblem)
-walbro 255 fuel pump
body has 250k, paint is black gray 3 years old but car sat in storage and paint never saw daylight so its fresh and still looks wet. engine bay, interior, jams, moldings, and lip were all painted to match.type r style front lip. fenders were cut and rolled for fitment of fiberglass fender flares. all emblems were shaved. clear title fresh inspection. alluminum hood risers (wastegate touched). no name rear tow hook and radiator with silicone hoses. full 3 inch meggan racing exaust (no cat) 15" xxr 002 zero offset wheels wrapped in new 195/45's also have a set of 205/50's. battery (optima yellowtop) relocated to rear with alluminum battery box. interior is gutted with new carpet in front section. i have itleast 90% of the factory interior, just not installed. i prefer the race car feel. no name short shifter and knob. bride seats with sparco belts. momo steering wheel. autometer oil and boost guages on pillar. riding on full skunk 2 race coilovers with high hats in rear blox upper control arms in front with camber adjustments and blox lca's in rear with blox camber kit as well. also have with the car but not installed is a set of 4 piston wilwood brake calipers with race pads and 11" rotors. greddy electronic boost controler with high and low boost, and a 3 bar map sensor, and a blox fuel pressure regulater.
car is on 5lbs wastegate, i have all springs and shims. as well as a factory p28 ecu and a chipped one.
i daily this car and it runs great and tons of fun to drive, hangs with the bikes in the mountain.
Pictures: [ATTACH=CONFIG]140663[/ATTACH][ATTACH=CONFIG]140665[/ATTACH][ATTACH=CONFIG]140666[/ATTACH][ATTACH=CONFIG]140667[/ATTACH][ATTACH=CONFIG]140668[/ATTACH][ATTACH=CONFIG]140669[/ATTACH][ATTACH=CONFIG]140670[/ATTACH][ATTACH=CONFIG]140671[/ATTACH]
Last edited by kole10h; 09-07-2012 at 03:16 PM. Reason: price change.. current pictures
04-03-2012, 05:58 PM
#2
Registered member
Join Date: Sep 2009
Location: NOVA
Posts: 760
Likes: 0
Received 0 Likes
on
0 Posts
Re: 92 eg hatch si clean on boost * skunk 2 bride momo turbonetics hks greddy blox xx
Wow thats fresh bro, trade check my thread. U can keep the seats and watever else. Worth a shot
04-03-2012, 06:27 PM
#3
Registered Member
Thread Starter
Join Date: Jul 2010
Location: lynchburg
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
Re: 92 eg hatch si clean on boost * skunk 2 bride momo turbonetics hks greddy blox xx
Thanks for the offer but your car just isn't for me..hella fresh tho glws
