92 Civic Hatch
#1
Registered Member
Thread Starter
Join Date: Mar 2010
Location: Lynchburg, VA
Posts: 235
Likes: 0
Received 0 Likes
on
0 Posts
92 Civic Hatch
Name - Zach
Location - Lynchburg
Price - 3,000 obo or Trade
Contact - PM
I have a 92 hatch that I'm not really looking to get rid of just seeing what I could get for it...
Engine
D16Z6 Vtec
Stock Head
Stock Intake Manifold
Aftermarket rods and pistons (not sure what size. got the car this way.)
Wire tuck
Battery relocated to rear
Fuse box relocated to where the ECU was
ECU relocated to glove box
Electric fan on switch
Chipped P28 (revs to 8,200)
Open flow headers, high flow cat, 3" piping all the way to a polished oem muffler
No A/C
Interior
Special Edition Del sol front seats *clean* (Dark blue with matching blue stripe)
GSR rear seats *clean*
Dash and door panels converted fron tan to black
Exterior
Fresh flat black rattle can paint job
Ebay coilovers all the way around (wouldn't hurt to replace them)
14" Toyota Corolla wheels painted black (very light weight)
Fiberglass Duckbill
Hood has some dents
Front bumper has one bad spot
Front fenders and hood need to be realigned
The Good
Pulls harder than any n/a single cam I've been in
Has beaten GSR civics and recently a AWD Turbo Talon
The bad
Tranny makes a noise like the throw out bearing is bad so I replaced it about 2 weeks ago and it's still doing it. A honda mechanic told me that it's probably the pressure plate so I have a aftermarket pressure plate just no time to put it in.
[ATTACH=CONFIG]93675[/ATTACH][ATTACH=CONFIG]93674[/ATTACH][ATTACH=CONFIG]93672[/ATTACH][ATTACH=CONFIG]93673[/ATTACH][ATTACH=CONFIG]94233[/ATTACH][ATTACH=CONFIG]94237[/ATTACH][ATTACH=CONFIG]94234[/ATTACH][ATTACH=CONFIG]94238[/ATTACH][ATTACH=CONFIG]94235[/ATTACH][ATTACH=CONFIG]94236[/ATTACH]
Location - Lynchburg
Price - 3,000 obo or Trade
Contact - PM
I have a 92 hatch that I'm not really looking to get rid of just seeing what I could get for it...
Engine
D16Z6 Vtec
Stock Head
Stock Intake Manifold
Aftermarket rods and pistons (not sure what size. got the car this way.)
Wire tuck
Battery relocated to rear
Fuse box relocated to where the ECU was
ECU relocated to glove box
Electric fan on switch
Chipped P28 (revs to 8,200)
Open flow headers, high flow cat, 3" piping all the way to a polished oem muffler
No A/C
Interior
Special Edition Del sol front seats *clean* (Dark blue with matching blue stripe)
GSR rear seats *clean*
Dash and door panels converted fron tan to black
Exterior
Fresh flat black rattle can paint job
Ebay coilovers all the way around (wouldn't hurt to replace them)
14" Toyota Corolla wheels painted black (very light weight)
Fiberglass Duckbill
Hood has some dents
Front bumper has one bad spot
Front fenders and hood need to be realigned
The Good
Pulls harder than any n/a single cam I've been in
Has beaten GSR civics and recently a AWD Turbo Talon
The bad
Tranny makes a noise like the throw out bearing is bad so I replaced it about 2 weeks ago and it's still doing it. A honda mechanic told me that it's probably the pressure plate so I have a aftermarket pressure plate just no time to put it in.
[ATTACH=CONFIG]93675[/ATTACH][ATTACH=CONFIG]93674[/ATTACH][ATTACH=CONFIG]93672[/ATTACH][ATTACH=CONFIG]93673[/ATTACH][ATTACH=CONFIG]94233[/ATTACH][ATTACH=CONFIG]94237[/ATTACH][ATTACH=CONFIG]94234[/ATTACH][ATTACH=CONFIG]94238[/ATTACH][ATTACH=CONFIG]94235[/ATTACH][ATTACH=CONFIG]94236[/ATTACH]
Last edited by Krak; 07-26-2010 at 08:05 AM. Reason: Adding photos