91 h22 crx ob1 1200
07-17-2012, 07:27 PM
#1
Registered Member
Thread Starter
Join Date: Aug 2011
Location: portsmouth
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
91 h22 crx obd1 1000
Name: stephen
Location: portsmouth
Means of contact: pm or call or text at 757-449-7174 anytime
Price: $1000 obo
exterior:
91 crx hf
gray paint
blacked out tails
checkered ducktaped frontend and sideskirts started pulling it back off the hood
aftermarket foglights
trim that runs in the middle of the door is shaved
has all trim
98 gsr hood hinges
jdm side markers
98 gsr trunk shocks
suspension & stopers:
stock front brakes
98 gsr rear brakes and swaybar[swaybar not hookedup to body just on lcas]
stock struts
new coilovers
upper front & rear sway bar
interior:
reclinable racing seats[need to be reupholstered]
4 point mugen harness's
nrg steering wheel
nrg removable hub
interior painted matte black
[NO BLOWER MOTOR OR HEATER CORE OR AIR CONTROLS]
94 civic coup full harness from headlights to taillights wired to work in my crx
all plastics except cargo cover
ignition removed[has switch and pushbutton start]
accord shifter box
engine bay:
weilded not just bondoed it has a thine layer of bondo in it to smooth it out
shaved all holes
tucked wire harness
fuse box relocated to under dash
battery relocated to under dash
painted color shift
there is nothing in the bay except motor, brake prop valve, and brake booster
motor:
h22a4 86k miles
no trans
brand new innovative conversion mounts
brand new cable to hydro conversion
brand new exedy clutch stage 1 no miles maybe 200 feet on it lol
new cam seals
new front main seal
new internal coil dizzy
removed butterflys from center plenum on intake mani
ported and polished intake mani
stock exhaust mani
custom axles
cx racing half size aluminum radiator
BADS!!!:
no trans
cracked windshield
idles high at about 2k rpms
has knock when first started
will not rev over 3k rpms
body is not the best not dented or anything just wavy as hell
sitting on steelies
had to remove the original trans mount on the body
might be forgetting some stuff pm if you have any questions
i will also sell just the rolling shell for 600 without the mounts and cable to hydro conversion 800 with mounts and conversion. i have a trans to go with it but its locked in gear
everything else is there to go with it
yes this was up here a couple days ago and i wanted more but when i went to edit it to drop the price more it was gone so now im reposting it for 1000. i have a truck in mind that i want.[ATTACH=CONFIG]147664[/ATTACH][ATTACH=CONFIG]147665[/ATTACH]
Location: portsmouth
Means of contact: pm or call or text at 757-449-7174 anytime
Price: $1000 obo
exterior:
91 crx hf
gray paint
blacked out tails
checkered ducktaped frontend and sideskirts started pulling it back off the hood
aftermarket foglights
trim that runs in the middle of the door is shaved
has all trim
98 gsr hood hinges
jdm side markers
98 gsr trunk shocks
suspension & stopers:
stock front brakes
98 gsr rear brakes and swaybar[swaybar not hookedup to body just on lcas]
stock struts
new coilovers
upper front & rear sway bar
interior:
reclinable racing seats[need to be reupholstered]
4 point mugen harness's
nrg steering wheel
nrg removable hub
interior painted matte black
[NO BLOWER MOTOR OR HEATER CORE OR AIR CONTROLS]
94 civic coup full harness from headlights to taillights wired to work in my crx
all plastics except cargo cover
ignition removed[has switch and pushbutton start]
accord shifter box
engine bay:
weilded not just bondoed it has a thine layer of bondo in it to smooth it out
shaved all holes
tucked wire harness
fuse box relocated to under dash
battery relocated to under dash
painted color shift
there is nothing in the bay except motor, brake prop valve, and brake booster
motor:
h22a4 86k miles
no trans
brand new innovative conversion mounts
brand new cable to hydro conversion
brand new exedy clutch stage 1 no miles maybe 200 feet on it lol
new cam seals
new front main seal
new internal coil dizzy
removed butterflys from center plenum on intake mani
ported and polished intake mani
stock exhaust mani
custom axles
cx racing half size aluminum radiator
BADS!!!:
no trans
cracked windshield
idles high at about 2k rpms
has knock when first started
will not rev over 3k rpms
body is not the best not dented or anything just wavy as hell
sitting on steelies
had to remove the original trans mount on the body
might be forgetting some stuff pm if you have any questions
i will also sell just the rolling shell for 600 without the mounts and cable to hydro conversion 800 with mounts and conversion. i have a trans to go with it but its locked in gear
everything else is there to go with it
yes this was up here a couple days ago and i wanted more but when i went to edit it to drop the price more it was gone so now im reposting it for 1000. i have a truck in mind that i want.[ATTACH=CONFIG]147664[/ATTACH][ATTACH=CONFIG]147665[/ATTACH]
Last edited by 91crxb18; 07-26-2012 at 01:16 PM.
Thread
Thread Starter
Forum
Replies
Last Post
EF9SIR
Engine / Exhaust / Drivetrain
31
03-17-2011 05:50 AM