smackvtec

TRADED PLEASE DELETE


Name: Brad
Location:Martinsburg, WV/Work in Leesburg, VA
Means of contact: PM, Thread, (540)336-3608
Price: $4000OBO
Trades: Mainly wanna sell to buy my friends RSX or other buddys DA Teg, but will entertain trades for decent stock car +cash depend on car. Can be auto or manual

PRICE DROP $2500obo----Not trade value tho

Might be trading for an Integra this weekend. But deal might not go threw. I wanna sell soon so I want $2500obo. I wanna sell before I pull motor out of my RSX. I also washed car today. Ill post updated pics tomarrow.

Description: I have a 1990 Honda Civic SI forsale/trade. Car has clean body and fresh paint. I traded my K ready eg for still a few weeks ago. It was a shell. Since then Ive put a decent amount of money in it to get in on the road to be my DD to keep miles off my Rsx. But im not really an EF person and its a really nice car for me to trash as a daily. Car was pretty much ready for turbo as it was turbo'd before me.

Exterior: 8/10
Fresh red paint. Would look even better with a good wash and wax. Body is in great shape. Only has a few bad spots. One is a little bondo bubble on RR above wheel. Second is two small dents on hood( I think they were from turbo manifold). Piece above front bumper is pushed up a little. Im gong to try and fix it. Car is on steelies as of now. Fronts are decent tires and rears are cracking and should be replaced in the future. Front bumper is cut out for front mount already. Has a VR6 front lip.

Interior:7/10
Also is pretty good shape. Clean carpet, mint backseats, and passenger seat is perfect. Driver seat has a patch on left side where all Hondas usually rip. Dash has 2 cracks that arent noticable unless uno they are there. Jus installed new Pioneer headunit. I moved the headunit down a spot in dash. I ordered a Honda block off plate for the old spot.

Motor:7/10
Motor and trans are from a 1992 Integra. Had 140,xxx on it when pulled.Motor runs great pulls decent for an LS. Tranny works fine but has a 3rd gear grind above 3,000 rpm. Has Hasport Billet Motor mounts. Harness was converted to OBD1 and somewhat tucked by 2 owners b4 me. Its doesnt look great but everything works fine. Is throwing a CEL for o2 sensor which Ill be fixing this weekend. Battery was relocated to trunk and has a kill switch.

Ill be putting on a new oil pan gasket, thermostat, cam seal, and valve cover gasket in the near future. Probably next week.

-B18A1 OBD1
-New Autozone Intake and filter
-High Flow Cat
-3in Themal Catback Exhaust
-ASR Subframe Brace
-C Pillar Bar
-Function 7 LCAS
-Kill Switch
-Skunk2 Knob
-Skunk 2 Short Shifter
-New Pioneer Headunit
-Walbro 255 Fuel Pump
-Full Race Front Traction Bar
-HIDS
-VR6 Front Lip
-Fuel Pressure Guage
-Braided Fuel Lines(not installed)
-Hasport Billet Mounts
-Tokico Blue Struts
-New Ebay Coilover
-Skunk 2 Front Camber Kit
-New Energy Suspension Trailing Arm Bushings(not Installed)
-Full Size Radiator
-DA Rear Disc Brake Conversion with new pads

Im sure Im forgetting some stuff and Ill update as I remember. Havent had a chance to wash it yet so sorry for being dirty in pics. Ill add pics of dash cracks and seat soon.

Pictures:



DSCN0077 by Smackvtec, on Flickr


DSCN0050 by Smackvtec, on Flickr


DSCN0053 by Smackvtec, on Flickr


DSCN0051 by Smackvtec, on Flickr


DSCN0052 by Smackvtec, on Flickr


DSCN0055 by Smackvtec, on Flickr


DSCN0056 by Smackvtec, on Flickr


DSCN0058 by Smackvtec, on Flickr


DSCN0057 by Smackvtec, on Flickr


DSCN0063 by Smackvtec, on Flickr


DSCN0059 by Smackvtec, on Flickr


DSCN0060 by Smackvtec, on Flickr


DSCN0064 by Smackvtec, on Flickr


DSCN0070 by Smackvtec, on Flickr



DSCN0071 by Smackvtec, on Flickr


DSCN0066 by Smackvtec, on Flickr


DSCN0065 by Smackvtec, on Flickr


DSCN0069 by Smackvtec, on Flickr


DSCN0074 by Smackvtec, on Flickr

More Pics 2/9/2012


2012-01-23_22-31-09_709 by Smackvtec, on Flickr


2012-02-04_17-48-15_227 by Smackvtec, on Flickr


2012-02-04_17-48-34_673 by Smackvtec, on Flickr


2012-02-04_17-48-23_322 by Smackvtec, on Flickr


2012-01-24_17-38-27_286 by Smackvtec, on Flickr


2012-01-23_22-31-24_268 by Smackvtec, on Flickr


2012-01-23_22-31-31_285 by Smackvtec, on Flickr


2012-01-23_22-30-56_61 by Smackvtec, on Flickr


2012-01-23_22-30-49_250 by Smackvtec, on Flickr


2012-01-23_22-31-38_900 by Smackvtec, on Flickr


2012-01-07_12-49-57_657 by Smackvtec, on Flickr

NasTHatch

vtec on the side of the car but it's not Vtec.......?

Yup

Ummmm maybe it was a vtec lol you ever thought of that one buddy? I love your Ef man pretty fucking fresh I'd would say that if I could see some engine bay pics that's would really let me decide if I like this Ef.

smackvtec

Yup had a turbo b16 in it b4 I got it. I left them on because I think they break the car up nice. Ill be adding bay pics tomorrow. I also forgot to list it has da rear disc brake conversion.


More Pics 2/8/2012
Before Swap went in

http://www.flickr.com/photos/60327296@N05/6848911209/http://www.flickr.com/photos/60327296@N05/6848911209/ by http://www.flickr.com/people/60327296@N05/, on Flickr

http://www.flickr.com/photos/60327296@N05/6848909187/http://www.flickr.com/photos/60327296@N05/6848909187/ by http://www.flickr.com/people/60327296@N05/, on Flickr

http://www.flickr.com/photos/60327296@N05/6848906885/http://www.flickr.com/photos/60327296@N05/6848906885/ by http://www.flickr.com/people/60327296@N05/, on Flickr

Dillweed

The car is clean but the price is delusional without even considering the faults.

smackvtec

Yea price is a little high for a reason thats why it says O B O that means there is room to negotiate for low bals which usually happens anyway . Car has over $4000 in parts,body work, paint not including the swap and all the parts i added. So if your not making an offer to buy, thanks for the free bump.

DRE SERIES

nice clean ef man bump for fellow ef hatch owner

93grayeg

Gold bay still?

smackvtec

Thanks man. And yea engine bay is gold.

smackvtec

I work in Leesburg if anyone near there is interested.