1992 Integra with 96 jdm gsr swap
#1
Registered Member
Thread Starter
Join Date: May 2009
Location: vb
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
1992 Integra with 96 jdm gsr swap
John Virginiabeach PM for contact price 4000$ trades wanted Im testing the waters on my DA. I bought the car a year ago as a bone stock ls integra. THE GOOD:It has a jdm b18c that came out of a 96jdm integra sir-g,that was bought from Nagano jdm importers(i have the papers).It has innovative race mounts(black bushings).It has skunk2 IM ,blox 68mm TB,weaponR intake,megan racing 4-2-1 header,megan test pipe,and full 2.5 exhaust.the transmission is the stock ys1 cable ,with an exedy oem clutch and lightened fidinza flywheel.It also has brand new usdm typeR valve cover, ngk wires, password jdm vtec solenoid cover and battery hold down. pwjdm shift boot ,pwjdm knob and pwjdm hard bushings. The car is lowered on Ksport springs and skunk2 shock 2.5 in front and 2.25 in rear. Also has blox lca's,Beaks rear lower tie bar and dna upper rear tie bar. The car is sitting on fresh meshes with brand new honda center caps.the Interior is super clean no rips on any seats no cracks on dash. Has stanley jdm one piece headlights with pwjdm h4h bulbs. Also have 4 pwjdm rotors and axxis pads on the way so they will also be on car. THE BAD: The car came from pittsburg PA so it has some rust ,No a/c or p/s,pasenger window motor is dead,fan cage is stripped on blower motor so its unpluged. sun roof is cracked but i have another in the garage just have to install it. speedo cable is broke i have another also it just needs to be installed. both will be done before trade or sale. also could use an alignment the hood and hatch are flat black
Last edited by dateg757; 07-08-2010 at 01:38 PM.
Thread
Thread Starter
Forum
Replies
Last Post