*1997 Turbo Civic Sedan*Function and Forms*A/C*PS*CC* Circuit 8s*
07-21-2010, 05:52 PM
#1
Boost Fiend
Thread Starter
Join Date: Jul 2009
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
*1997 Turbo Civic Sedan*Function and Forms*A/C Ready*PS*CC* Circuit 8s*
Josh
-Cell:804-363-5994
-Price:$4700 As-Is
- With Stock Suspension- $4200
With your wheels and stock suspension- $3700
I Will text more/better pictures on request
-Trades-Cherokee + Cash Depending on condition
Motor-Transmission
-Stock y7
- Brand New Godspeed T3/T4 .50 Trim Turbo w/oil restrictor
- Spoolin Performance A/C compatible log manifold
- EmUSa 38mm Wastegate 5lb Spring- Manual Boost controller
- Chipped P06 ECU and obd2a to obd1 conversion harness from JK Tuning
-Custom Downpipe into full 3" exhaust, quiet and throaty.
- D16y8 Manifold and z6 throttle body
- Ebay Greddy Type-s BOV
- Tuner Toys Block Oil Tee
- Oil feed and return lines from Performance dynamic (about 100 bucks worth of fittings and line)
-Power Steering
-Cruise Control
- 5 Speed- No Grinds or Pop Outs
-Tuned By Scott Hennesey on 11lbs pulls hard
-A/C is 100% installed but it needs a compressor, i will put one in before its sold and then it will be working perfect
Interior
-Grey Cloth
-Clean Clean Clean!
-No Rips or Tears in any of the seats
-Neptune Tunerview II in the Radio slot to monitor boost and temperatures of all kinds, completely customizable via USB
Exterior
-Inza Red
-Sticky junk on bumpers from the old safety bumpers(comes of when its hot out)
-Aftermarket sunroof that is permanently closed, think of it as a skylight now.
Suspension/Wheels and Tires
- 2k Mile old Function and Form Type 1s
- Rota Circuit 8 15x7 38mm Offset
- 2k Mile old Dunlop Direzzas
- Black Blox Lower Control Arms
- It is higher than in the pictures, scraped too much
-Cell:804-363-5994
-Price:$4700 As-Is
- With Stock Suspension- $4200
With your wheels and stock suspension- $3700
I Will text more/better pictures on request
-Trades-Cherokee + Cash Depending on condition
Motor-Transmission
-Stock y7
- Brand New Godspeed T3/T4 .50 Trim Turbo w/oil restrictor
- Spoolin Performance A/C compatible log manifold
- EmUSa 38mm Wastegate 5lb Spring- Manual Boost controller
- Chipped P06 ECU and obd2a to obd1 conversion harness from JK Tuning
-Custom Downpipe into full 3" exhaust, quiet and throaty.
- D16y8 Manifold and z6 throttle body
- Ebay Greddy Type-s BOV
- Tuner Toys Block Oil Tee
- Oil feed and return lines from Performance dynamic (about 100 bucks worth of fittings and line)
-Power Steering
-Cruise Control
- 5 Speed- No Grinds or Pop Outs
-Tuned By Scott Hennesey on 11lbs pulls hard
-A/C is 100% installed but it needs a compressor, i will put one in before its sold and then it will be working perfect
Interior
-Grey Cloth
-Clean Clean Clean!
-No Rips or Tears in any of the seats
-Neptune Tunerview II in the Radio slot to monitor boost and temperatures of all kinds, completely customizable via USB
Exterior
-Inza Red
-Sticky junk on bumpers from the old safety bumpers(comes of when its hot out)
-Aftermarket sunroof that is permanently closed, think of it as a skylight now.
Suspension/Wheels and Tires
- 2k Mile old Function and Form Type 1s
- Rota Circuit 8 15x7 38mm Offset
- 2k Mile old Dunlop Direzzas
- Black Blox Lower Control Arms
- It is higher than in the pictures, scraped too much
Last edited by hondaconvert; 08-31-2010 at 03:52 PM. Reason: PRICE DROP
07-21-2010, 06:07 PM
#3
Boost Fiend
Thread Starter
Join Date: Jul 2009
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
Re: *1997 Turbo Civic Sedan*Function and Forms*A/C*PS*CC* Circuit 8s*
Thanks for the offer, ill keep that in mind for sure, but i wanna get back in a cherokee again soon, fall wheelin is fast approaching
Last edited by hondaconvert; 07-21-2010 at 06:40 PM.
