tunerviewrd1 chipd ecu, turbo stuff dohc zc d16a8 etc goodies cheap
02-06-2011, 01:46 PM
#1
Registered Member
Thread Starter
Join Date: May 2009
Posts: 667
Likes: 0
Received 0 Likes
on
0 Posts
tunerviewrd1 chipd ecu, turbo stuff dohc zc d16a8 etc goodies cheap
Name: mike
Location: martinburg wv/winchester va
Means of contact: pm or call/text 240 329 1165
Price: $ in the ad next to item for sale
tunerviewrd1 chipd ecu, turbo stuff dohc zc d16a8 ps3 etc goodies cheap
PICS
Flickr: sand in my va-ja-ja 's Photostream
READ THIS!!!
Location: martinsburg wv 25405
Price: check description or call me/text, but pretty firm/not parting out
Contact: call or text 240 329 1165. pm me and ill try to get back to ya.
Payment: CASH AND CARRY or can do paypal you add fees and shipping cost for paypal.
Willing to meet up to 100 miles if you wanna get this shit. call me to discuss
*parts
*parts
-rsx tyoes seat black side airbags for the seats, complete as shown 150 shipped for both sides
-delsol cluster out of a manual d16z6 car with 70k on itprety fn mint cluster
65 shipped
-golden eagle vacumm block with npt fittings, new never used shit i havent even drilled the block to tap iit yet just opened for pics comes complete as seen not seperating dont ask
45 shipped for all was 70+ shipping
-p28 ecu p28a01 came out of a 93 civic si bone virgin, 100 shipped
-00 integra rear calipers upgraded to bigger ones 20 shipped for both sides matbe missing the ebrake cable peices
-89 honda crx gas tank clean on inside but ok on out nothing broke or mesed up
20 pick it up
-obd1 to obd0 dizzy conversion harness new just hooked up and sat
25 shipped
-rywire obd1 to obd0 conversion harness comes with some hook up for something in pics and 4 wire o2 wire and vtec hook ups. new just pluged and sat,
100 shipped
-zc dohc bottom end dirty but good shape over all just throw a head and run it had 180 compresson, pulled the head to use on my other car. comes as shown i did stratch the one piston to see the code
180picked up
-d16z6? girdle was on built bottom end built rod let go took a chunk out but good if you need a stocker replacement
25 shipped size thats why
-d16z6 vtec syl. missing bottom thingy
15 shipped
-d16z6 stock cam
25 shipped
-d16z6/y8 vtec cover
30 shipped
-d16a8 complete block head crank pistons rods head etc, had 45k on it bottom end look like it head not so much but was taken apart to do a stock rebuild and use it as a dd but dont need it
rare as it only comes in europe.
180 picked up for all
-dseries semi complete turbo kit, missing intercooler and couplers and oil drain and feed line, and a few bolts
comes with ebay 16g turbo as shown no in out play very minute/barley there side to side probly since it ant seen oil in a year and jpipe. no coolant lines, comes with o2 housing
-turbo and j pipe and o2 housing
125 shipped
-hf mani with adapter
35 shipped together
-2.5 downpipe and mid pipe goes to about gas tank
20 prefer not to ship
will seperating or sell all together. 160 picked up all
-dsm blue top 450 injectors 60 shipped i has 2 sets
-h series kit
****ALL new never used/never mounted stuff in here***
-h/f 22/23 etc new never used t3 tube mani wit 38mm waste gate
and wastegate no name on both comes with gaskit set in pic
but 25 shipped for all 3 together
-boost gauge and afr gauge new never used come as seen nothing else comes with it, just the 2 gauges and gauge pod, no wires, not lines etc...
15 shipped for all 3
-manual boost controller comes as shown nothing else new never used
10 shipped
-intercooler and piping and couplers and t bolt clamps. new never used
intercooler is 28.5 in in end to end length 7.5in hieght 2.25 thick 2.5 end caps for piping
ic is beaded ic piping is not
ic piping comes with all 8 pieces of pipe. 8 couplers that are 3 or 4 ply? and 16 tbolt clamps
150 picked up i can ship it or part it out just specific stuff lmk
-t3 turbo send me a text at 240 329 1165 for pics never used brand new spanky fresh
5 bolt hot side 50 trim i believe never used never mounted.
120 shipped
-dohc zc head needs a intake valve got bent on starter crank. comes as shown 20 picked up
-d series dizzys b7 z6 etc all obd 1 30 each
-obd2 and obd1 ls dizzy 40 each
-fidanza flywheel and clucth 10k on it only used to break in itr trans
price for flywheel shipped 65
clutch and throwout bearing and fork 20
-2g eclipse turbo wing black 40
-99 teg driver headlight 30
Location: martinburg wv/winchester va
Means of contact: pm or call/text 240 329 1165
Price: $ in the ad next to item for sale
tunerviewrd1 chipd ecu, turbo stuff dohc zc d16a8 ps3 etc goodies cheap
PICS
Flickr: sand in my va-ja-ja 's Photostream
READ THIS!!!
Location: martinsburg wv 25405
Price: check description or call me/text, but pretty firm/not parting out
Contact: call or text 240 329 1165. pm me and ill try to get back to ya.
Payment: CASH AND CARRY or can do paypal you add fees and shipping cost for paypal.
Willing to meet up to 100 miles if you wanna get this shit. call me to discuss
*parts
*parts
-rsx tyoes seat black side airbags for the seats, complete as shown 150 shipped for both sides
-delsol cluster out of a manual d16z6 car with 70k on itprety fn mint cluster
65 shipped
-golden eagle vacumm block with npt fittings, new never used shit i havent even drilled the block to tap iit yet just opened for pics comes complete as seen not seperating dont ask
45 shipped for all was 70+ shipping
-p28 ecu p28a01 came out of a 93 civic si bone virgin, 100 shipped
-00 integra rear calipers upgraded to bigger ones 20 shipped for both sides matbe missing the ebrake cable peices
-89 honda crx gas tank clean on inside but ok on out nothing broke or mesed up
20 pick it up
-obd1 to obd0 dizzy conversion harness new just hooked up and sat
25 shipped
-rywire obd1 to obd0 conversion harness comes with some hook up for something in pics and 4 wire o2 wire and vtec hook ups. new just pluged and sat,
100 shipped
-zc dohc bottom end dirty but good shape over all just throw a head and run it had 180 compresson, pulled the head to use on my other car. comes as shown i did stratch the one piston to see the code
180picked up
-d16z6? girdle was on built bottom end built rod let go took a chunk out but good if you need a stocker replacement
25 shipped size thats why
-d16z6 vtec syl. missing bottom thingy
15 shipped
-d16z6 stock cam
25 shipped
-d16z6/y8 vtec cover
30 shipped
-d16a8 complete block head crank pistons rods head etc, had 45k on it bottom end look like it head not so much but was taken apart to do a stock rebuild and use it as a dd but dont need it
rare as it only comes in europe.
180 picked up for all
-dseries semi complete turbo kit, missing intercooler and couplers and oil drain and feed line, and a few bolts
comes with ebay 16g turbo as shown no in out play very minute/barley there side to side probly since it ant seen oil in a year and jpipe. no coolant lines, comes with o2 housing
-turbo and j pipe and o2 housing
125 shipped
-hf mani with adapter
35 shipped together
-2.5 downpipe and mid pipe goes to about gas tank
20 prefer not to ship
will seperating or sell all together. 160 picked up all
-dsm blue top 450 injectors 60 shipped i has 2 sets
-h series kit
****ALL new never used/never mounted stuff in here***
-h/f 22/23 etc new never used t3 tube mani wit 38mm waste gate
and wastegate no name on both comes with gaskit set in pic
but 25 shipped for all 3 together
-boost gauge and afr gauge new never used come as seen nothing else comes with it, just the 2 gauges and gauge pod, no wires, not lines etc...
15 shipped for all 3
-manual boost controller comes as shown nothing else new never used
10 shipped
-intercooler and piping and couplers and t bolt clamps. new never used
intercooler is 28.5 in in end to end length 7.5in hieght 2.25 thick 2.5 end caps for piping
ic is beaded ic piping is not
ic piping comes with all 8 pieces of pipe. 8 couplers that are 3 or 4 ply? and 16 tbolt clamps
150 picked up i can ship it or part it out just specific stuff lmk
-t3 turbo send me a text at 240 329 1165 for pics never used brand new spanky fresh
5 bolt hot side 50 trim i believe never used never mounted.
120 shipped
-dohc zc head needs a intake valve got bent on starter crank. comes as shown 20 picked up
-d series dizzys b7 z6 etc all obd 1 30 each
-obd2 and obd1 ls dizzy 40 each
-fidanza flywheel and clucth 10k on it only used to break in itr trans
price for flywheel shipped 65
clutch and throwout bearing and fork 20
-2g eclipse turbo wing black 40
-99 teg driver headlight 30
Last edited by Bustitsideways; 02-13-2011 at 01:16 PM.
