Toda cams, 12.5:1 b20b
06-07-2013, 06:40 PM
#1
Registered Member
Thread Starter
Join Date: Aug 2010
Posts: 236
Likes: 0
Received 0 Likes
on
0 Posts
Toda cams, 12.5:1 b20b
Name: Travis
Location: Martinsburg, wv
Means of contact: 304-676-3549
Price: $posted below
Description:
TODA Spec D Cams with AEM cam Gears - $550
B20B bottom end: JE 12.5:1 pistons, Eagle rods, ACL race bearings, and polished crank. Motor is very strong, when in the car compression test was 250-270 across the board. $850
b16 Hydro transmission, has 2nd gear grind at high RPMS, - $250/obo
DSM 450cc bluetop injectors - $50
Pictures:
[ATTACH=CONFIG]167001[/ATTACH]
[ATTACH=CONFIG]167002[/ATTACH]
[ATTACH=CONFIG]167003[/ATTACH]
Location: Martinsburg, wv
Means of contact: 304-676-3549
Price: $posted below
Description:
TODA Spec D Cams with AEM cam Gears - $550
B20B bottom end: JE 12.5:1 pistons, Eagle rods, ACL race bearings, and polished crank. Motor is very strong, when in the car compression test was 250-270 across the board. $850
b16 Hydro transmission, has 2nd gear grind at high RPMS, - $250/obo
DSM 450cc bluetop injectors - $50
Pictures:
[ATTACH=CONFIG]167001[/ATTACH]
[ATTACH=CONFIG]167002[/ATTACH]
[ATTACH=CONFIG]167003[/ATTACH]
Last edited by Nunyabidness; 06-08-2013 at 04:49 AM. Reason: Engine parts only here
06-07-2013, 07:59 PM
#2
Registered member
Join Date: Oct 2007
Location: richmond
Posts: 618
Likes: 0
Received 0 Likes
on
0 Posts
Re: Toda cams, 12.5:1 b20b, eg6 cluster
250-270?? What is that? The spec from Honda is +-15psi between your highest and lowest cylinders compression. I hope that is not what your are saying your readings are because you would be 5psi over spec.
