SBF 408 Windsor Complete or Apart
#1
Settled..
Thread Starter
Join Date: Nov 2002
Location: Richmond,VA
Posts: 1,350
Likes: 0
Received 0 Likes
on
0 Posts
SBF 408 Windsor Complete or Apart
Location: Richmond, VA
Contact: Richard 804-986-7353 or send PM
Compelte Price for SBF 408 Windsor $5000
1969 Ford Windsor Block
Ohio 4340 Steel Crank
Eagle 4340 H-beam Rods
SRP 13.5 to 1 Forged Pistions
Canton Oil Pan for Foxbody
Lunati .698 Solid Roller Cam
Super Victor Ported intake, Drilled for Fogger or Alcohol
Trick Flow Series-R Race CNC ported heads, 225cc, 2.10 intake, 1.80 exhaust, 61cc comb, Setup for .750 solid roller, flowed 347 @ .700 lift
Comp Pro magnum 1.6 Roller Rockers
Comp Stud Girdles
Comp Push Rods
ARP Stud Kit throughout the motor (Heads & Mains)
Or I will Sell the 408w Short Block for $2500
1969 Ford Windsor Block
Ohio 4340 Steel Crank
Eagle 4340 H-beam Rods
SRP 13.5 to 1 Forged Pistions
Lunati .698 Solid Roller Cam
Heads and Intake $2000
Super Victor Ported intake, Drilled for Fogger or Alcohol
Trick Flow Series-R Race CNC ported heads, 225cc, 2.10 intake, 1.80 exhaust, 61cc comb, Setup for .750 solid roller, flowed 347 @ .700 lift
This motor ran 9.75 @ 143 best in my 3250lb Foxbody Mustang with a Glide and NOS Convertor. Motor have never been sprayed. Has about 80 runs since built.
Finishing up my 438 windsor now, need to move this!
I have the oil pan, heads, and intake off for inspection!
Contact: Richard 804-986-7353 or send PM
Compelte Price for SBF 408 Windsor $5000
1969 Ford Windsor Block
Ohio 4340 Steel Crank
Eagle 4340 H-beam Rods
SRP 13.5 to 1 Forged Pistions
Canton Oil Pan for Foxbody
Lunati .698 Solid Roller Cam
Super Victor Ported intake, Drilled for Fogger or Alcohol
Trick Flow Series-R Race CNC ported heads, 225cc, 2.10 intake, 1.80 exhaust, 61cc comb, Setup for .750 solid roller, flowed 347 @ .700 lift
Comp Pro magnum 1.6 Roller Rockers
Comp Stud Girdles
Comp Push Rods
ARP Stud Kit throughout the motor (Heads & Mains)
Or I will Sell the 408w Short Block for $2500
1969 Ford Windsor Block
Ohio 4340 Steel Crank
Eagle 4340 H-beam Rods
SRP 13.5 to 1 Forged Pistions
Lunati .698 Solid Roller Cam
Heads and Intake $2000
Super Victor Ported intake, Drilled for Fogger or Alcohol
Trick Flow Series-R Race CNC ported heads, 225cc, 2.10 intake, 1.80 exhaust, 61cc comb, Setup for .750 solid roller, flowed 347 @ .700 lift
This motor ran 9.75 @ 143 best in my 3250lb Foxbody Mustang with a Glide and NOS Convertor. Motor have never been sprayed. Has about 80 runs since built.
Finishing up my 438 windsor now, need to move this!
I have the oil pan, heads, and intake off for inspection!
Thread
Thread Starter
Forum
Replies
Last Post