<><><><Rebuilt Rb26 w/receipts over 5k invested
05-11-2012, 03:48 PM
#1
Winning
Thread Starter
Join Date: Mar 2009
Posts: 568
Likes: 0
Received 0 Likes
on
0 Posts
<><><><Rebuilt Rb26 w/receipts over 5k invested
Name: Chris
Location: Fredericksburg
Means of contact: 5402878161
Price: $4000
I have a R32 GTR rb26 purchased from JEI a few months ago, was suppose to go in my r32 but I traded off the shell for another car leaving me with this. Seeing as how im getting a M3 soon, I no longer need this. I have receipts for everything. Also have pictures of alot of the assembly. This motor was IMMACULATE when we pulled it apart, couldn't have possibly had more that 20-30k on it. There was no scoring of the cylinder walls, or the bearings, or even the crank for that matter. Motor has been sitting in my garage since assembly, we had it a few hours away from starting and yanked it back out due to a great offer. All rotating parts coated in assembly lube, zinc break in additive has been added to 5 quarts of royal purple that is currently in the engine.
NEW Crank Collar installed $265 w/labor
NEW rear main
NEW water pump $60
NEW full gasket kit installed $160
NEW timing belt $60
NEW adjustable cam gears $65
NEW water hard pipes $30
NEW ACL rod/Main bearings $150
NEW Freddy intake manifold $180
NEW Quest alternator mod w/ turnbuckle $190
NEW Hayden thermostatic sandwich plate $50
NEW no-name 13row oil cooler $50
NEW AN push lock fittings $30
NEW ACT HD pressure plate
NEW ACT 6 puck sprung disc-Both for $350
Powdercoated gloss black valve covers $100
2 MAFS $200
6 NEW BKR7E's $15
Refinished oem flywheel
Turbo manifolds/dump pipes stripped of all rust painted w/high temp
Heat shields high temp painted
Turbo hot sides stripped of all surface rust
Turbos cleaned inside and out
Had a new oil pump on the motor when I got it
Refinished coil harness
entire oil pan cleaned inside and out
Block stripped and painted
Throttle bodies fully cleaned inside and out
Full wiring harness
Cleaned/painted ignitor
Cleaned and tested starter
Power steering pump modified for single outlet HICAS side deleted.
ECU included
PRICE: $4000 obo I have almost 5 in it, in 100% provable receipt form and another few hundred in labor and materials will also consider trades for motorcycles, or cars.
Also have Blitz SUS intakes for it in like new condition for $150 if purchased with the engine
Pictures:
More pictures upon request if seriously interested in purchase, i probably have 20 of assembly and parts.
Location: Fredericksburg
Means of contact: 5402878161
Price: $4000
I have a R32 GTR rb26 purchased from JEI a few months ago, was suppose to go in my r32 but I traded off the shell for another car leaving me with this. Seeing as how im getting a M3 soon, I no longer need this. I have receipts for everything. Also have pictures of alot of the assembly. This motor was IMMACULATE when we pulled it apart, couldn't have possibly had more that 20-30k on it. There was no scoring of the cylinder walls, or the bearings, or even the crank for that matter. Motor has been sitting in my garage since assembly, we had it a few hours away from starting and yanked it back out due to a great offer. All rotating parts coated in assembly lube, zinc break in additive has been added to 5 quarts of royal purple that is currently in the engine.
NEW Crank Collar installed $265 w/labor
NEW rear main
NEW water pump $60
NEW full gasket kit installed $160
NEW timing belt $60
NEW adjustable cam gears $65
NEW water hard pipes $30
NEW ACL rod/Main bearings $150
NEW Freddy intake manifold $180
NEW Quest alternator mod w/ turnbuckle $190
NEW Hayden thermostatic sandwich plate $50
NEW no-name 13row oil cooler $50
NEW AN push lock fittings $30
NEW ACT HD pressure plate
NEW ACT 6 puck sprung disc-Both for $350
Powdercoated gloss black valve covers $100
2 MAFS $200
6 NEW BKR7E's $15
Refinished oem flywheel
Turbo manifolds/dump pipes stripped of all rust painted w/high temp
Heat shields high temp painted
Turbo hot sides stripped of all surface rust
Turbos cleaned inside and out
Had a new oil pump on the motor when I got it
Refinished coil harness
entire oil pan cleaned inside and out
Block stripped and painted
Throttle bodies fully cleaned inside and out
Full wiring harness
Cleaned/painted ignitor
Cleaned and tested starter
Power steering pump modified for single outlet HICAS side deleted.
ECU included
PRICE: $4000 obo I have almost 5 in it, in 100% provable receipt form and another few hundred in labor and materials will also consider trades for motorcycles, or cars.
Also have Blitz SUS intakes for it in like new condition for $150 if purchased with the engine
Pictures:
More pictures upon request if seriously interested in purchase, i probably have 20 of assembly and parts.
Thread
Thread Starter
Forum
Replies
Last Post
Dmac710
Import - ASIA
20
12-15-2010 08:30 PM
Cobra4B
Automotive Discussion
25
01-24-2004 11:09 PM