PRC 215 LSX Heads with .700 lift Dual Spring Kit (Pics)!
10-21-2011, 08:58 AM
#1
Registered member
Thread Starter
Join Date: Nov 2009
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
PRC 215 LSX Heads with .700 lift Dual Spring Kit (Pics)!
Name: Chris Driver
Location: Lynchburg
Means of contact: cdriver71@gmail.com
Price: $1700 shipped
Description:
I have a set of PRC 215 heads for LS1 & LS2 with dual springs for sale (these heads cost $2500,00 new). These heads have around 4000 miles on them. Verified to be in great condition and ready to bolt on by West Coast Cylinder Heads.
Price $1700 shipped!!
Post here PM or e-mail cdriver71@gmail.com
Precision Race Components all new cylinder head castings completed with 215cc runners. For stock cubic inch LS1/LS2 applications.
Features:
215cc Fully CNC Ported Intake Runners
84cc Fully CNC Ported Exhaust Runners
Small Bore Chambers For Increased Horsepower & Torque+
62cc CNC Machined Chambers
2.04" Intake / 1.600" Stainless Valves
Factory Rocker Friendly!!*
The all new 215cc cylinder head is finally available for customers looking for the pinnacle of LS cathedral port performance. Now is your chance to own the same cylinder head that currently holds the fastest stock bottom end heads / cam record! The new 215cc port has been flow bench tested to flow over 320cfm & can support everything from smaller camshaft street engines all the way to all our race engines. Engine dyno testing has shown these cylinder heads support over 650 flywheel horsepower in 408cid applications.
The PRC 215 cylinder heads helped the Texas Speed 98 Camaro to run a stock bottom end record of 9.82 in the 1/4 mile!!
Flow Data:
4.00" Flow Plate - No Exhaust Pipe
LIFT INTAKE FLOW EXHAUST FLOW
.100" 68 CFM 56 CFM
.200" 145 CFM 115 CFM
.300" 214 CFM 167 CFM
.400" 271 CFM 202 CFM
.500" 304 CFM 219 CFM
.600" 318 CFM 238 CFM
.650" 321 CFM 236 CFM
*All aftermarket cylinder heads feature bronze guides. Stock rocker arms will cause increased guide wear in applications over .600" lift. Roller rockers can help to reduce this wear.
www.texas-speed.com/p-7-prc-215cc-cnc-ported-ls-cylinder-heads.aspx
Pictures:
Thanks
Chris
Location: Lynchburg
Means of contact: cdriver71@gmail.com
Price: $1700 shipped
Description:
I have a set of PRC 215 heads for LS1 & LS2 with dual springs for sale (these heads cost $2500,00 new). These heads have around 4000 miles on them. Verified to be in great condition and ready to bolt on by West Coast Cylinder Heads.
Price $1700 shipped!!
Post here PM or e-mail cdriver71@gmail.com
Precision Race Components all new cylinder head castings completed with 215cc runners. For stock cubic inch LS1/LS2 applications.
Features:
215cc Fully CNC Ported Intake Runners
84cc Fully CNC Ported Exhaust Runners
Small Bore Chambers For Increased Horsepower & Torque+
62cc CNC Machined Chambers
2.04" Intake / 1.600" Stainless Valves
Factory Rocker Friendly!!*
The all new 215cc cylinder head is finally available for customers looking for the pinnacle of LS cathedral port performance. Now is your chance to own the same cylinder head that currently holds the fastest stock bottom end heads / cam record! The new 215cc port has been flow bench tested to flow over 320cfm & can support everything from smaller camshaft street engines all the way to all our race engines. Engine dyno testing has shown these cylinder heads support over 650 flywheel horsepower in 408cid applications.
The PRC 215 cylinder heads helped the Texas Speed 98 Camaro to run a stock bottom end record of 9.82 in the 1/4 mile!!
Flow Data:
4.00" Flow Plate - No Exhaust Pipe
LIFT INTAKE FLOW EXHAUST FLOW
.100" 68 CFM 56 CFM
.200" 145 CFM 115 CFM
.300" 214 CFM 167 CFM
.400" 271 CFM 202 CFM
.500" 304 CFM 219 CFM
.600" 318 CFM 238 CFM
.650" 321 CFM 236 CFM
*All aftermarket cylinder heads feature bronze guides. Stock rocker arms will cause increased guide wear in applications over .600" lift. Roller rockers can help to reduce this wear.
www.texas-speed.com/p-7-prc-215cc-cnc-ported-ls-cylinder-heads.aspx
Pictures:
Thanks
Chris
Last edited by Driver; 10-29-2011 at 09:04 AM.
Thread
Thread Starter
Forum
Replies
Last Post
bryan64613
Engine / Exhaust / Drivetrain
5
11-06-2009 09:56 PM
Volkswagen
Automotive Discussion
1
02-02-2003 09:49 AM
