Poormans TypeR Complete changeover ''Fresh''
08-07-2009, 05:20 AM
#1
MOAR REP PLZ
Thread Starter
Join Date: Feb 2006
Posts: 3,292
Likes: 0
Received 0 Likes
on
0 Posts
Poormans TypeR Complete changeover ''Fresh''
PICS PICS PICS
Name: Carlos
Location: Richmond
Contact Info: PM
Price: $3000 OBO
Description: I have a complete swap ready to be dropped in a shell and go. I built it for me but ended up buying a different setup so now its for sale.
Pics: Scroll down.
Block:
98 GSR block B18C1 USDM
all stock internals
all sensors
0 miles on new water pump
0 miles on new oil pump
all new seals
alternator and belt
half shaft
CTR crank pulley available not installed
Head:
00 B16 head USDM
Milled
Intake side port and polished
full 98 spec ITR valve train
ITR 98 spec cams
ITR intake manifold with all sensors
ITR throttle body with all sensors
ITR Valve cover
Ebay 4-1 header
OBDII GSR harness
OBDII GSR Distributor
All sensors on the head
All new seals and gaskets (0 miles)
Tranny:
98 GSR tranny USDM
no grinds or pop outs
clean.
ECU:
GSR ecu (OBDII) or chipped P28 (OBDI)
All the used parts were checked prior to putting the engine together and made sure they are in good shape. I will write a bill of sale to prove that its a good running motor swap.
Again all you need to install the swap is there and I will include it in the sale. Mounts, harness, axles, etc.
I also have all the parts to convert this to OBDI if the buyer wants I can swap all those parts for the OBDII parts.
Name: Carlos
Location: Richmond
Contact Info: PM
Price: $3000 OBO
Description: I have a complete swap ready to be dropped in a shell and go. I built it for me but ended up buying a different setup so now its for sale.
Pics: Scroll down.
Block:
98 GSR block B18C1 USDM
all stock internals
all sensors
0 miles on new water pump
0 miles on new oil pump
all new seals
alternator and belt
half shaft
CTR crank pulley available not installed
Head:
00 B16 head USDM
Milled
Intake side port and polished
full 98 spec ITR valve train
ITR 98 spec cams
ITR intake manifold with all sensors
ITR throttle body with all sensors
ITR Valve cover
Ebay 4-1 header
OBDII GSR harness
OBDII GSR Distributor
All sensors on the head
All new seals and gaskets (0 miles)
Tranny:
98 GSR tranny USDM
no grinds or pop outs
clean.
ECU:
GSR ecu (OBDII) or chipped P28 (OBDI)
All the used parts were checked prior to putting the engine together and made sure they are in good shape. I will write a bill of sale to prove that its a good running motor swap.
Again all you need to install the swap is there and I will include it in the sale. Mounts, harness, axles, etc.
I also have all the parts to convert this to OBDI if the buyer wants I can swap all those parts for the OBDII parts.
Last edited by Beans90CRX; 08-18-2009 at 08:05 AM.
