parts cleanout..h22-turbo-nitrous-slicks-autometer
05-06-2012, 07:32 PM
#1
Registered Member
Thread Starter
Join Date: Aug 2011
Posts: 316
Likes: 0
Received 0 Likes
on
0 Posts
parts cleanout..h22-turbo-nitrous-slicks
Name: g
Location: charlottesville
Means of contact: here or pm
i have a bunch of stuff i have accumilated that im probably not gonna use, so im putting it up for sale. i do ccept paypal, and will ship the smaller stuff, as long as it fits in a flat rate box.
turbonetics deltagate 38mm? 2 bolt wastegate, 6 or 9 psi spring. $100
H22 shifter and cables, shifter has been cut and welded, and trimmed to fit under EG console. cables work perfect. $125/obo
H/F series lightened flywheels. top:$30, bottom: ACT $50
H22 revhard cast log manifold,t3 flange, 2-bolt gate flange. $150
OEM H22 intake manifold, iab's removed, lots of port work, alot better midrange pull on my h2b over skunk2 intake. has KMS EGR block off plate. black wrinkle paint is flaking off $100
ebay 4-2-1 header, modified to bolt up to stock or aftermarket exhaust on H2B, fit my eg perfect. $50
H22 or H2B engine harness for EG, came out of running car, no issues, wired for resistor box, alt wire runs under engine. $150/obo
mishimoto FMIC, huge!!, cant remember size, 3" in/out, like new. $200/obo
WELD racelite wheels, 13", M&H 22x13x8 slicks, lots of tread left, super light, clean up great with a little polish. $400
last is a nitrous kit that im undecided on selling, this is the big boy of direct port kits, nitrous express SX2, 2 stages through one nozzle, no main line or bottle, will need new hard lines bent up, but all tube nuts and flares are included, just need new line and flare tool. i really dont care if i never sell this, but if asking price is met, i will let it go. $600 firm, if you think thats alot, google this kit,the nozzles are $120 EACH. solenoids, rails, AN line/fittings/etc.
Location: charlottesville
Means of contact: here or pm
i have a bunch of stuff i have accumilated that im probably not gonna use, so im putting it up for sale. i do ccept paypal, and will ship the smaller stuff, as long as it fits in a flat rate box.
turbonetics deltagate 38mm? 2 bolt wastegate, 6 or 9 psi spring. $100
H22 shifter and cables, shifter has been cut and welded, and trimmed to fit under EG console. cables work perfect. $125/obo
H/F series lightened flywheels. top:$30, bottom: ACT $50
H22 revhard cast log manifold,t3 flange, 2-bolt gate flange. $150
OEM H22 intake manifold, iab's removed, lots of port work, alot better midrange pull on my h2b over skunk2 intake. has KMS EGR block off plate. black wrinkle paint is flaking off $100
ebay 4-2-1 header, modified to bolt up to stock or aftermarket exhaust on H2B, fit my eg perfect. $50
H22 or H2B engine harness for EG, came out of running car, no issues, wired for resistor box, alt wire runs under engine. $150/obo
mishimoto FMIC, huge!!, cant remember size, 3" in/out, like new. $200/obo
WELD racelite wheels, 13", M&H 22x13x8 slicks, lots of tread left, super light, clean up great with a little polish. $400
last is a nitrous kit that im undecided on selling, this is the big boy of direct port kits, nitrous express SX2, 2 stages through one nozzle, no main line or bottle, will need new hard lines bent up, but all tube nuts and flares are included, just need new line and flare tool. i really dont care if i never sell this, but if asking price is met, i will let it go. $600 firm, if you think thats alot, google this kit,the nozzles are $120 EACH. solenoids, rails, AN line/fittings/etc.
Last edited by F_your_K; 05-16-2012 at 03:52 AM.
05-07-2012, 06:47 AM
#2
Registered member
Join Date: Jan 2010
Location: Louisa Va
Posts: 1,433
Likes: 0
Received 0 Likes
on
0 Posts
Re: parts cleanout..h22-turbo-nitrous-slicks-autometer
how wide are the welds
05-07-2012, 08:15 AM
#3
Registered Member
Thread Starter
Join Date: Aug 2011
Posts: 316
Likes: 0
Received 0 Likes
on
0 Posts
Re: parts cleanout..h22-turbo-nitrous-slicks-autometer
^im guessing 13x8, but not 100% sure. UP
05-08-2012, 03:08 PM
#4
Registered Member
Thread Starter
Join Date: Aug 2011
Posts: 316
Likes: 0
Received 0 Likes
on
0 Posts
Re: parts cleanout..h22-turbo-nitrous-slicks-autometer
UP
05-09-2012, 03:22 AM
#5
Registered member
Join Date: Sep 2011
Posts: 701
Likes: 0
Received 0 Likes
on
0 Posts
Re: parts cleanout..h22-turbo-nitrous-slicks-autometer
Selling your shit I see... no good now how u gonna keep up with me
05-09-2012, 12:53 PM
#6
Registered Member
Thread Starter
Join Date: Aug 2011
Posts: 316
Likes: 0
Received 0 Likes
on
0 Posts
Re: parts cleanout..h22-turbo-nitrous-slicks-autometer
if people would buy some of this stuff, i'd show you
05-10-2012, 03:42 PM
#7
Registered Member
Thread Starter
Join Date: Aug 2011
Posts: 316
Likes: 0
Received 0 Likes
on
0 Posts
Re: parts cleanout..h22-turbo-nitrous-slicks-autometer
UP
05-11-2012, 02:22 PM
#8
Registered Member
Thread Starter
Join Date: Aug 2011
Posts: 316
Likes: 0
Received 0 Likes
on
0 Posts
Re: parts cleanout..h22-turbo-nitrous-slicks-autometer
UP, prices are not set in stone
05-12-2012, 08:46 AM
#9
Registered member
Join Date: Oct 2007
Posts: 594
Likes: 0
Received 0 Likes
on
0 Posts
Re: parts cleanout..h22-turbo-nitrous-slicks-autometer
still got the header?
05-13-2012, 12:15 PM
#10
Registered Member
Thread Starter
Join Date: Aug 2011
Posts: 316
Likes: 0
Received 0 Likes
on
0 Posts
Re: parts cleanout..h22-turbo-nitrous-slicks-autometer
sure do, gauges have been sold, intake pending, UP