Need AC and PS brackets and pulleys
#1
Boost is Better
Thread Starter
Join Date: Oct 2004
Location: Richmond area
Posts: 2,456
Likes: 0
Received 0 Likes
on
0 Posts
Need AC and PS brackets and pulleys
Name: Brandon
Location: Powhatan VA
Means of contact: Pm or here
Price: $Name it
UPDATE. I got the PS parts I needed but now I still need the P54 Ac bracket if anyone out there has one please let me know. Thanks.
Ok did a GSR swap into my 00 EX and I need all the B series mounts from an SI or integra to make my AC and PS work in my car. OR i've actually heard that a B20 trans mount/ac bracket will work with the D series ac compressor and that would be awesome to not have to change the compressor and recharge the system.
I would rather not have to change the AC pump but if you have the B series bracke I will take that and try to locate a B20 one in the mean time.
Needed
P54 Trans mount/Ac bracket
Location: Powhatan VA
Means of contact: Pm or here
Price: $Name it
UPDATE. I got the PS parts I needed but now I still need the P54 Ac bracket if anyone out there has one please let me know. Thanks.
Ok did a GSR swap into my 00 EX and I need all the B series mounts from an SI or integra to make my AC and PS work in my car. OR i've actually heard that a B20 trans mount/ac bracket will work with the D series ac compressor and that would be awesome to not have to change the compressor and recharge the system.
I would rather not have to change the AC pump but if you have the B series bracke I will take that and try to locate a B20 one in the mean time.
Needed
P54 Trans mount/Ac bracket
Last edited by sircrx; 05-09-2011 at 06:44 AM.
#3
Re: Need AC and PS brackets and pulleys
its weird but i found a p30 bracket from a 95 civic single cam and it looks like all the other p30s online, im going to check if it will fit in mine, good luck with your setup
#7
Boost is Better
Thread Starter
Join Date: Oct 2004
Location: Richmond area
Posts: 2,456
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need AC and PS brackets and pulleys
Lets take this back to the top. Apparently LS mounts are not the same. It must be from a vtec motor.
Thanks in advance
Thanks in advance
#9
Boost is Better
Thread Starter
Join Date: Oct 2004
Location: Richmond area
Posts: 2,456
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need AC and PS brackets and pulleys
Ok so the P30 bracket is from the 96-97 del sol vtec and will NOT work on a D series compressor. Just researched the crap out of it. I need a bracket from a 94-95 del sol or a b20 MUST BE A P54 bracket... but I can definitely use the other two mounts you have...
Thanks everyone.
Thanks everyone.