quick26

Name: Sean

Location: Elizabeth City

Contact: Post or PM

Items Wanted:
-42 or 60lb injectors
-TPS and IAC valve for 93 or older 5.0
-connector for TPS on harness side of car for 93 or older 5.0
-throttle cable for 93 or older 5.0
-cruise control cable for 93 or older 5.0
-pmas blow through meter
-3.5" thin wall ss or alumnium 45* or 90* elbow to retro fit the 95 cold air intake to the 93 throttle body or straight section of the thin wall ss or alumnuim and a rubber 90* or 45* elbow with correct taper.
-alumnium drive shaft for fox or 94-95 mustang
-hyper coil springs for coil overs, 400lb-450lb 2.5"id, 10" length
-hyper coil springs for coil overs, 300lb-350lb 2.25" id, 8" length

quick26

i know some one has some of these parts collecting dust.

1987notch50

i have a few mustang parts i have a really nice set of aluminum heads and i have a lot of msd ignition and i have a 31 spline dif and a few other parts let me know

SCREECHO

you checked on the corral yet? think a couple of aluminum driveshafts there, along with the throttle body. There is a few part outs as well.

quick26

no i have not, i will though. thanks. i figured i would post on here since its a local forum.

AndradeDC5

i have a mustang for sale check thread will take $800 for car...it has a running motor in it. 5.0 (302)

dragcivic92

i have a set of svo 42lb injectors (green top) for $200

quick26

are they new?

http://www.buyfordracing.com/shop/pr..._id=634cPath=9