KA24DE
03-24-2011, 02:45 PM
#1
YANKYMATE!
Thread Starter
KA24DE
Name: Trace
Location: Yorktown
Means of Contact: PM, this thread
Price: $150
I've decided to sell my spare motor, the plans I had for it have fallen to the wayside to make room for more important things. I scooped this thing up in February this year on the Sumospeed forums. The guy I bought it from found it here on VaDriven midway through last year.
According to the original seller, it was pulled from a 96 240SX SE in order to make room for an SR swap. The motor had 149,355 the day of the pull, and still ran like a champ.
I know that the motor can still be turned over by the crank, but since it's been sitting for almost a year, I was going to change out all the fluids and gaskets/seals. Just a disclaimer: I will not be held accountable for the condition of the motor. Buyer takes it as is.
The motor will come with the assembled long block, valve cover to oil pan, with the intake and exhaust manifolds still attached. This will not come with a cluth/flywheel/pressure plate, transmission, starter, alternator, A/C pump, harness, and its missing a couple sensors as well.
Here are some pictures as they appeared in the original ad:
I'll take some more pictures of the motor in it's current state this weekend. Not much has changed, it's just slightly dirtier, and its on a tire instead of in an engine bay.
Please feel free to ask any and all questions, thanks for looking!
Location: Yorktown
Means of Contact: PM, this thread
Price: $150
I've decided to sell my spare motor, the plans I had for it have fallen to the wayside to make room for more important things. I scooped this thing up in February this year on the Sumospeed forums. The guy I bought it from found it here on VaDriven midway through last year.
According to the original seller, it was pulled from a 96 240SX SE in order to make room for an SR swap. The motor had 149,355 the day of the pull, and still ran like a champ.
I know that the motor can still be turned over by the crank, but since it's been sitting for almost a year, I was going to change out all the fluids and gaskets/seals. Just a disclaimer: I will not be held accountable for the condition of the motor. Buyer takes it as is.
The motor will come with the assembled long block, valve cover to oil pan, with the intake and exhaust manifolds still attached. This will not come with a cluth/flywheel/pressure plate, transmission, starter, alternator, A/C pump, harness, and its missing a couple sensors as well.
Here are some pictures as they appeared in the original ad:
I'll take some more pictures of the motor in it's current state this weekend. Not much has changed, it's just slightly dirtier, and its on a tire instead of in an engine bay.
Please feel free to ask any and all questions, thanks for looking!
03-27-2011, 02:10 PM
#3
YANKYMATE!
Thread Starter
Re: KA24DE
Here ya go
The motor will come with the assembled long block, valve cover to oil pan, with the intake and exhaust manifolds still attached. This will not come with a cluth/flywheel/pressure plate, transmission, starter, alternator, A/C pump, harness, and its missing a couple sensors as well.
04-11-2011, 07:52 AM
#8
YANKYMATE!
Thread Starter
Re: KA24DE
ehh, it's kind of still available. I added parts to it and pulled some off. I'm deleting this thread and making a newer updated one with pictures tonight. I'll PM you as soon as its up - sound good?
