H22/F20B/H2B, Turbo
#1
Registered Member
Thread Starter
Join Date: Aug 2007
Location: West Virginia
Posts: 247
Likes: 0
Received 0 Likes
on
0 Posts
H22/F20B/H2B, Turbo
Have a bunch of stuff I need to get rid of so I can pull the Del Sol motor. Most of it is projects I no longer have time for. Located in Beckley WV
PM me, if you need to call or w/e I'll pm my number
Garrett t3/t4 .60 trim
.60 A/R HOUSING
60 TRIM WHEEL
TURBINE SPECS:
.63 A/R HOUSING
STAGE 3 WHEEL
oil lubricated centersection.
supportable of 500whp
Can use 4 or 5 bolt DP. Ran for 2 miles max and 15-20min of idle time
$400 shipped
JDM H22A head with cams, missing cam bolts(may have them somewhere) -offer-
JDM H22A bottom end. Missing windage tray. Would hold 4 oil PSI at idle and 28PSI @ WOT. Oil pump is bad is my guess. Needs rebuild $150
Home fab H2B plate minus hardware. Would need hardware (including ARP flywheel bolts for flywheel spacer), and mounts. Uses B-series flywheel. $100 shipped
S20 Small bearing trans. Worked fine. $100
Rebuilt D15/Z6 mini-me. Needs a cam gear to correct timing. Started and ran enough to get the car from trailer to my garage. $200 will seperate head from block
y7 head with no cam or rocker assembly. Good for porting project. $50 + shipping
Have f22 rods and pistons(no pic) $70 shipped
F20B intake manifold -Offer-
Will trade for a B18 setup in need of rebuild or a set of wheels. Could also use a Del Sol back bumper in good shape, I'll entertain almost anything
PM me, if you need to call or w/e I'll pm my number
Garrett t3/t4 .60 trim
.60 A/R HOUSING
60 TRIM WHEEL
TURBINE SPECS:
.63 A/R HOUSING
STAGE 3 WHEEL
oil lubricated centersection.
supportable of 500whp
Can use 4 or 5 bolt DP. Ran for 2 miles max and 15-20min of idle time
$400 shipped
JDM H22A head with cams, missing cam bolts(may have them somewhere) -offer-
JDM H22A bottom end. Missing windage tray. Would hold 4 oil PSI at idle and 28PSI @ WOT. Oil pump is bad is my guess. Needs rebuild $150
Home fab H2B plate minus hardware. Would need hardware (including ARP flywheel bolts for flywheel spacer), and mounts. Uses B-series flywheel. $100 shipped
S20 Small bearing trans. Worked fine. $100
Rebuilt D15/Z6 mini-me. Needs a cam gear to correct timing. Started and ran enough to get the car from trailer to my garage. $200 will seperate head from block
y7 head with no cam or rocker assembly. Good for porting project. $50 + shipping
Have f22 rods and pistons(no pic) $70 shipped
F20B intake manifold -Offer-
Will trade for a B18 setup in need of rebuild or a set of wheels. Could also use a Del Sol back bumper in good shape, I'll entertain almost anything
#8
Registered Member
Thread Starter
Join Date: Aug 2007
Location: West Virginia
Posts: 247
Likes: 0
Received 0 Likes
on
0 Posts
Re: H22/F20B/H2B, Turbo
Was re: to civic riders items he was interested in dick lol.
H2B plate, Mini-me, and snail are sold.
Also have the trans, flywheel, shifter box and cables for the H. No clutch for it though if anyone is interested
H2B plate, Mini-me, and snail are sold.
Also have the trans, flywheel, shifter box and cables for the H. No clutch for it though if anyone is interested
Thread
Thread Starter
Forum
Replies
Last Post