GSR/SC61TURBO KIT/CRX/AN MUCH MORE
#1
Registered Member
Thread Starter
Join Date: Apr 2008
Location: richmond
Posts: 262
Likes: 0
Received 0 Likes
on
0 Posts
GSR/SC61TURBO KIT/CRX/AN MUCH MORE
Name:BUGG
Location:RICHMOND
Means of contact:434-294-3832 or pm
Price: $3500or may be obo FOR EVEYTHING YOU SEE IN THE PICS YOU GeT IT ALL NO BULL$hit all of my parts you will be saving so much money buying my setup COME ON SOMEBODY COME GET IT HELL BUY IT AN PART IT OUT AN MAKE YOUR SELF SOME MONEY TO ADD TO YOUR SETUP
I HAVE OVER $13.500 IN TO THIS SETUP. ...........turbo kit an etc boost an timer are sold..........
Description:Well here it is im in a jam im in need of geting a house i have 5 kids and we lost our home due to the last hurricane storm i have been trying to get back on my feet but it ant going as plan so this is what i did not want to do but got to do what i got to do so here it is.
GSR built to handle up to 30lbs of boost the motor is still on the stan with assembly oil in it stock bore and port the only thing stock in the motor is the valves the motor was built by SHAWN RAMEY the block has been decked to the pistons and the crank was balanced new oil an water pump an gaskits the block has been sleved with AEBS sleves acl race bearings eagle rods arp bolts 9.0;1cp pistons after market wristpins arp head studs super teck springs corwler retainers i had pro2s cams in it but have pulled them and sold them knew they were to big for a turbo setup but i do still have the gsr cams to go with it wont hurt to put them back in unles you put some turbo cams in it or pro1s what i like but its up to you it has a old school skunk 2 intake on it and a gsr throttle body that has been boarded to the max with a bullfrog performanes throttle plate in it i believe it was open up to a 68mm and a sc61 precision turbo kit with a 19lbs spring to top it off i do have alot of other parts that will be inclueed with the motor hopefuly the pics are working so you can see them if not ill get them up asap also there is a 89 crx si its prety much a rolling shell no rust can used a liltel tlc like any 89 that can go too an i have a set of rear disk braeks for the crx also an 3inch stainless exst/stage5 competition clutch/8lb fananza flywheel/new hasport shift linkages.
Pictures:Pictures by bugg_081 - Photobucket
Location:RICHMOND
Means of contact:434-294-3832 or pm
Price: $3500or may be obo FOR EVEYTHING YOU SEE IN THE PICS YOU GeT IT ALL NO BULL$hit all of my parts you will be saving so much money buying my setup COME ON SOMEBODY COME GET IT HELL BUY IT AN PART IT OUT AN MAKE YOUR SELF SOME MONEY TO ADD TO YOUR SETUP
I HAVE OVER $13.500 IN TO THIS SETUP. ...........turbo kit an etc boost an timer are sold..........
Description:Well here it is im in a jam im in need of geting a house i have 5 kids and we lost our home due to the last hurricane storm i have been trying to get back on my feet but it ant going as plan so this is what i did not want to do but got to do what i got to do so here it is.
GSR built to handle up to 30lbs of boost the motor is still on the stan with assembly oil in it stock bore and port the only thing stock in the motor is the valves the motor was built by SHAWN RAMEY the block has been decked to the pistons and the crank was balanced new oil an water pump an gaskits the block has been sleved with AEBS sleves acl race bearings eagle rods arp bolts 9.0;1cp pistons after market wristpins arp head studs super teck springs corwler retainers i had pro2s cams in it but have pulled them and sold them knew they were to big for a turbo setup but i do still have the gsr cams to go with it wont hurt to put them back in unles you put some turbo cams in it or pro1s what i like but its up to you it has a old school skunk 2 intake on it and a gsr throttle body that has been boarded to the max with a bullfrog performanes throttle plate in it i believe it was open up to a 68mm and a sc61 precision turbo kit with a 19lbs spring to top it off i do have alot of other parts that will be inclueed with the motor hopefuly the pics are working so you can see them if not ill get them up asap also there is a 89 crx si its prety much a rolling shell no rust can used a liltel tlc like any 89 that can go too an i have a set of rear disk braeks for the crx also an 3inch stainless exst/stage5 competition clutch/8lb fananza flywheel/new hasport shift linkages.
Pictures:Pictures by bugg_081 - Photobucket
Last edited by bugg_08; 12-28-2011 at 07:21 PM. Reason: more info