Gsr Head B18c1
#1
Registered Member
Thread Starter
Join Date: Feb 2009
Location: Farmville
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Gsr Head B18c1
Name:BRANDON
Location:FARMVILLE
Means of contact:CALL OR TEXT 434-547-5080
Price: $250 OBO OR TRADE
Description:
I had this head redone with new valve seals, type R springs and retainers.I ran it for about 4000 miles and it started missing on cylinder #2. I found out that the intake valves were adjusted to tight. It has either slightly bent a valve or burnt it. It was only 40 psi less on #2 than the others, nothing major. I have the stock valves that will go with it. You could have just the 2 intake valves replaced on cylinder #2 and it would be fine.
It will come with everything except cams,distributor and valve cover.
Trades would be set of 4 205/50/16 tires or smaller or an ek lip kit.
Pictures:
Location:FARMVILLE
Means of contact:CALL OR TEXT 434-547-5080
Price: $250 OBO OR TRADE
Description:
I had this head redone with new valve seals, type R springs and retainers.I ran it for about 4000 miles and it started missing on cylinder #2. I found out that the intake valves were adjusted to tight. It has either slightly bent a valve or burnt it. It was only 40 psi less on #2 than the others, nothing major. I have the stock valves that will go with it. You could have just the 2 intake valves replaced on cylinder #2 and it would be fine.
It will come with everything except cams,distributor and valve cover.
Trades would be set of 4 205/50/16 tires or smaller or an ek lip kit.
Pictures:
Thread
Thread Starter
Forum
Replies
Last Post
outdrivingumas
Engine / Exhaust / Drivetrain
6
10-26-2010 06:47 PM