Full OBD2 GSR swap with S300V2 and ek mounts and wiring
01-03-2014, 11:44 AM
#1
Registered Member
Thread Starter
Join Date: Aug 2009
Posts: 279
Likes: 0
Received 0 Likes
on
0 Posts
Full OBD2 GSR swap with S300V2 and ek mounts and wiring
Name: Eddie
Location: 757
Means of contact: TEXT only 757-701-7298
Price: $2000 or best offer
Description:
S300 IS SOLD NOW COMES WITH P72 GSR ECU
Text for pictures
I really don't want to sell it but the time base come to part with my FULL Obd2 gsr swap.
This engine came out of my old personal integra that I purchased stock in 2010 with 88k on it, I drove the car till 110k then traded it for my S2000. Long story short the guy I traded it to put the car into a gaurdrail at around 45 and really jacked the body of the car up. I then parted out what I could but I kept the full swap to put into one of my civics or possibly my crx. Money has become tight so it's either I keep the engine or loose my car as I had to take a title loan out on it to move out of my house. I put together everything to install the engine into a 98-00 civic. It can come with the following for the full $2500 asking price but I'm willing to part some of it out if I have a buyer for the engine and tranny first. Here's a breakdown of what it all is.
Obd2b B18C1 swap out of a 2000 Integra GSR with 110xxx on it with the gauge cluster out of the car to verify mileage
New NGK iridium plugs
New NGK plug wires
Clutch with less than 2k
Brand new Hardrace rubber mounts
Brand new OEM metal portion for the mounts
Shift linkage
New reman autozone axles for 99-00 civic si
Full uncut wiring harness for obd2b ek civic
Stock P72 GSR ecu
Need to sell ASAP and all serious offers will be considered
Thanks for looking
Eddie
[ATTACH=CONFIG]175515[/ATTACH][ATTACH=CONFIG]175516[/ATTACH][ATTACH=CONFIG]175513[/ATTACH][ATTACH=CONFIG]175514[/ATTACH]
Location: 757
Means of contact: TEXT only 757-701-7298
Price: $2000 or best offer
Description:
S300 IS SOLD NOW COMES WITH P72 GSR ECU
Text for pictures
I really don't want to sell it but the time base come to part with my FULL Obd2 gsr swap.
This engine came out of my old personal integra that I purchased stock in 2010 with 88k on it, I drove the car till 110k then traded it for my S2000. Long story short the guy I traded it to put the car into a gaurdrail at around 45 and really jacked the body of the car up. I then parted out what I could but I kept the full swap to put into one of my civics or possibly my crx. Money has become tight so it's either I keep the engine or loose my car as I had to take a title loan out on it to move out of my house. I put together everything to install the engine into a 98-00 civic. It can come with the following for the full $2500 asking price but I'm willing to part some of it out if I have a buyer for the engine and tranny first. Here's a breakdown of what it all is.
Obd2b B18C1 swap out of a 2000 Integra GSR with 110xxx on it with the gauge cluster out of the car to verify mileage
New NGK iridium plugs
New NGK plug wires
Clutch with less than 2k
Brand new Hardrace rubber mounts
Brand new OEM metal portion for the mounts
Shift linkage
New reman autozone axles for 99-00 civic si
Full uncut wiring harness for obd2b ek civic
Stock P72 GSR ecu
Need to sell ASAP and all serious offers will be considered
Thanks for looking
Eddie
[ATTACH=CONFIG]175515[/ATTACH][ATTACH=CONFIG]175516[/ATTACH][ATTACH=CONFIG]175513[/ATTACH][ATTACH=CONFIG]175514[/ATTACH]
Last edited by Navy_CRX; 01-21-2014 at 12:54 PM. Reason: Sold S300
01-03-2014, 01:01 PM
#2
II Always
Join Date: May 2006
Location: Suffolk VA
Posts: 6,741
Likes: 0
Received 0 Likes
on
0 Posts
Re: Full OBD2 GSR swap with S300V2 and ek mounts and wiring
Text me a price for just the trans please.
Alan
Alan
01-04-2014, 11:14 AM
#3
Registered Member
Thread Starter
Join Date: Aug 2009
Posts: 279
Likes: 0
Received 0 Likes
on
0 Posts
Had some interest... I'm trying to keep the swap together unless I have a buyer for the motor and tranny
Can also include an AEM cold air intake, a turbonetics 38mm wastegate, some new 880cc revision injectors and a hondata boost selonoid if full $2500 asking price is met!!!
Can also include an AEM cold air intake, a turbonetics 38mm wastegate, some new 880cc revision injectors and a hondata boost selonoid if full $2500 asking price is met!!!
Last edited by Nunyabidness; 01-04-2014 at 05:16 PM. Reason: Merged-one bump a day
01-07-2014, 12:47 PM
#4
Registered Member
Thread Starter
Join Date: Aug 2009
Posts: 279
Likes: 0
Received 0 Likes
on
0 Posts
Re: Full OBD2 GSR swap with S300V2 and ek mounts and wiring
Bump
01-07-2014, 12:56 PM
#5
-RepLegion
Join Date: Apr 2010
Location: Newport News/ NC Lake Gaston
Posts: 2,166
Likes: 0
Received 0 Likes
on
0 Posts
Re: Full OBD2 GSR swap with S300V2 and ek mounts and wiring
Nice if only I had a teg.
01-08-2014, 06:36 PM
#6
Registered Member
Thread Starter
Join Date: Aug 2009
Posts: 279
Likes: 0
Received 0 Likes
on
0 Posts
Re: Full OBD2 GSR swap with S300V2 and ek mounts and wiring
Swaps set up for an EK not a DC/EG!!!
01-09-2014, 05:11 AM
#7
-RepLegion
Join Date: Apr 2010
Location: Newport News/ NC Lake Gaston
Posts: 2,166
Likes: 0
Received 0 Likes
on
0 Posts
01-09-2014, 08:07 AM
#8
Registered Member
Thread Starter
Join Date: Aug 2009
Posts: 279
Likes: 0
Received 0 Likes
on
0 Posts
Re: Full OBD2 GSR swap with S300V2 and ek mounts and wiring
Sorry I was just trying to clarify that it's a bolt in swap for EK chassis
01-10-2014, 12:20 PM
#9
Registered Member
Thread Starter
Join Date: Aug 2009
Posts: 279
Likes: 0
Received 0 Likes
on
0 Posts
Re: Full OBD2 GSR swap with S300V2 and ek mounts and wiring
Bump it up
01-11-2014, 05:57 PM
#10
Registered Member
Thread Starter
Join Date: Aug 2009
Posts: 279
Likes: 0
Received 0 Likes
on
0 Posts
Re: Full OBD2 GSR swap with S300V2 and ek mounts and wiring
S300 listed seperatly check my other thread for info