Full Build D16Y8 Turbo
#1
Registered Member
Thread Starter
Join Date: Jun 2006
Posts: 587
Likes: 0
Received 0 Likes
on
0 Posts
Single cam Full build and turbo parts
***NEED TO SELL ALOTA SHIT THIS WEEKEND*** SHOOT SOME OFFERS
Gregg WILLING TO PART OUT NOW ----
2400 engine/parts minus "turbo kit"--3200 Everything.
757 469 1522 VA beach Ive listed the MSRP next to the new stuff but everythings OBO
Whats goin on yall...so my cars not selling and getin pretty desperate on cash for this house so im throwin out the option of selling the Motor with all the goods...i know im forgeting a few things but everything for it to run is here....stuff in bold/green is "turbo kit". Its about $4100 in parts and machining alone not including the engine n tranny for 3200...
This is a link to an almost identical set up making 463 HP and 352 ft/lbs
http://www.turbod16.com/viewtopic.ph...0&sk=t&sd=attp
1998 D16y8 motor/trans 88k mi
Eagle H-Beam rods*Rated to 900hp $419
CP 8:1 comp pistons and rings* $592
OEM rod bearings* $30
CompCams valve springs* $218
Cometic Head Gasket* $87
ARP head Studs* $120
Supertech blockguard* $97
Timing Belt* $25
Valve Seals* $59
DSM 440 CC injectors* $240
Fully ported and decked Cylinder Head-i paid 200 for head and around 300 for machining Has valves rockers etc...
[B]308 Stainless "Twisted Ram" turbo manifold 42mm runners* $200(T3/T4)[/B]
OBX Aluminum Trumpeted Intake manifold* and gaskets* $150
ACT HC5-XTSS street/race clutch 2500 mi on clutch $429
ACT Prolite Xact 8.8 lbs flywheel 2500 mi $366
[COLOR="darkolivegreen"]Garrett t3 super 60 Trim (60 hot, 48 or 52 cold) *895*
ebay intercooler and piping sold
MSD6A ignition 110obo
2 black EM1 SI rims
Distributor with new ignition coil 130 obo
Y8 wiring harness
tranny 2500 mi since rebuild 220 obo
Gregg WILLING TO PART OUT NOW ----
2400 engine/parts minus "turbo kit"--3200 Everything.
757 469 1522 VA beach Ive listed the MSRP next to the new stuff but everythings OBO
Whats goin on yall...so my cars not selling and getin pretty desperate on cash for this house so im throwin out the option of selling the Motor with all the goods...i know im forgeting a few things but everything for it to run is here....stuff in bold/green is "turbo kit". Its about $4100 in parts and machining alone not including the engine n tranny for 3200...
This is a link to an almost identical set up making 463 HP and 352 ft/lbs
http://www.turbod16.com/viewtopic.ph...0&sk=t&sd=attp
1998 D16y8 motor/trans 88k mi
Eagle H-Beam rods*Rated to 900hp $419
CP 8:1 comp pistons and rings* $592
OEM rod bearings* $30
CompCams valve springs* $218
Cometic Head Gasket* $87
ARP head Studs* $120
Supertech blockguard* $97
Timing Belt* $25
Valve Seals* $59
DSM 440 CC injectors* $240
Fully ported and decked Cylinder Head-i paid 200 for head and around 300 for machining Has valves rockers etc...
[B]308 Stainless "Twisted Ram" turbo manifold 42mm runners* $200(T3/T4)[/B]
OBX Aluminum Trumpeted Intake manifold* and gaskets* $150
ACT HC5-XTSS street/race clutch 2500 mi on clutch $429
ACT Prolite Xact 8.8 lbs flywheel 2500 mi $366
[COLOR="darkolivegreen"]Garrett t3 super 60 Trim (60 hot, 48 or 52 cold) *895*
ebay intercooler and piping sold
MSD6A ignition 110obo
2 black EM1 SI rims
Distributor with new ignition coil 130 obo
Y8 wiring harness
tranny 2500 mi since rebuild 220 obo
Last edited by eghatch27; 03-30-2010 at 05:48 PM.