FULL B series turbo swap. EVERYTHING. 500hp
02-04-2013, 02:54 PM
#1
Registered Member
Thread Starter
Join Date: Jul 2011
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
FULL B series turbo swap. EVERYTHING. 500hp
Name: Stephen
Location: Norfolk
Means of contact: 757466627
Price: $5000
Description: Selling my whole setup. Motor has 15k miles. Turbo has 4k miles. This is a strong solid setup. Perfect compression test, no leaks, no funny sounds. Tuned by Ramey, made 486/326 n 18psi.
b18c1 longblock
arias 10:5:1 pistion
eagle rods
acl race bearings
b18c1 crank
skunk 2 retainers/valves/springs
type r cams
golden eagle block guard
ARP headstuds
b18c1 dizzy
NGK spark plug wires
bbk intake
blox 70mm throttle body
moroso 5.5q oil pan
AEM black serie fuel rail w/ fuel pressure gauge
injector dynamics ID1000
Hasport solid mounts
koyo 3" radiator
mishimottor intercooler
custom 3" downpipe heatwrapped
custom dumptube heatwrapped
Omni 4bar map sensor
b18c1 trans
kaaz lsd
slight grind in 5th gear
oem shift linkage w/ gsr shifter
Spec clutch stage 3+
turbo setup
Precision 6262 T4 .82a/r 4"inlet w/ turbo blanket
AFI turbo ramhorn T4
Mishimotto intercooler (not sure of specs)
Greddy type S BOV
2.5" charge piping
Rameybuilt custom race breather catch can
comes with s300 with tunes, engine harness
Location: Norfolk
Means of contact: 757466627
Price: $5000
Description: Selling my whole setup. Motor has 15k miles. Turbo has 4k miles. This is a strong solid setup. Perfect compression test, no leaks, no funny sounds. Tuned by Ramey, made 486/326 n 18psi.
b18c1 longblock
arias 10:5:1 pistion
eagle rods
acl race bearings
b18c1 crank
skunk 2 retainers/valves/springs
type r cams
golden eagle block guard
ARP headstuds
b18c1 dizzy
NGK spark plug wires
bbk intake
blox 70mm throttle body
moroso 5.5q oil pan
AEM black serie fuel rail w/ fuel pressure gauge
injector dynamics ID1000
Hasport solid mounts
koyo 3" radiator
mishimottor intercooler
custom 3" downpipe heatwrapped
custom dumptube heatwrapped
Omni 4bar map sensor
b18c1 trans
kaaz lsd
slight grind in 5th gear
oem shift linkage w/ gsr shifter
Spec clutch stage 3+
turbo setup
Precision 6262 T4 .82a/r 4"inlet w/ turbo blanket
AFI turbo ramhorn T4
Mishimotto intercooler (not sure of specs)
Greddy type S BOV
2.5" charge piping
Rameybuilt custom race breather catch can
comes with s300 with tunes, engine harness
Last edited by HATCH UP; 02-05-2013 at 08:16 PM.
Thread
Thread Starter
Forum
Replies
Last Post