FMIC off dsm and some ic piping
06-11-2011, 07:45 PM
#1
Registered Member
Thread Starter
Join Date: Jan 2004
Location: Richmond,Va
Posts: 246
Likes: 0
Received 0 Likes
on
0 Posts
FMIC off dsm and some ic piping
Name: Jamie
Location: Richmond
Means of contact: pm or email Lewisjo08@hotmail.com
Price: $65
Description:
I have a rather large fmic for sale. The unit is a tube and fin design. Has a couple of bent fins but nothing to bad at all. Also there is minor damage at the bottom front when the fmic scaped over a speed bump,I have a pic of it below. It did not leak when I took it off. The intercooler measures 34 inches across outlet to outlet x 10.50 high x 3 inches high. The outlets are 2.5 inches.AlsoI have an assortment of 2.5 inch intercooler pipes,silicone couplings and t bolt clamps for sale. There where used on my old eclipse gsx . Pipes are in good shape. Two pieces have 1st gen dsm bov flanges welded on them.(these pieces are a little smaller in diameter). Everything is as is
Pictures:
Location: Richmond
Means of contact: pm or email Lewisjo08@hotmail.com
Price: $65
Description:
I have a rather large fmic for sale. The unit is a tube and fin design. Has a couple of bent fins but nothing to bad at all. Also there is minor damage at the bottom front when the fmic scaped over a speed bump,I have a pic of it below. It did not leak when I took it off. The intercooler measures 34 inches across outlet to outlet x 10.50 high x 3 inches high. The outlets are 2.5 inches.AlsoI have an assortment of 2.5 inch intercooler pipes,silicone couplings and t bolt clamps for sale. There where used on my old eclipse gsx . Pipes are in good shape. Two pieces have 1st gen dsm bov flanges welded on them.(these pieces are a little smaller in diameter). Everything is as is
Pictures:
Thread
Thread Starter
Forum
Replies
Last Post
Ultracoupe
Engine / Exhaust / Drivetrain
23
04-04-2010 05:50 AM
Hondasi88
Engine / Exhaust / Drivetrain
0
06-04-2009 06:01 PM